Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Glass Fiber Filled |
Manufacturer | |
Trade Name | |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | DSM Akulon® K-FG6 (Cond.) 30% Glass Reinforced Nylon 6 (North America) (discontinued **).pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.33 g/cc | 0.0480 lb/in³ | (DAM); ISO 1183 |
Water Absorption | 6.0 % | 6.0 % | (DAM); Sim. to ISO 62 |
Moisture Absorption at Equilibrium | 1.8 % | 1.8 % | Humidity Absorption (DAM); Sim. to ISO 62 |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | DAM; ISO 294-4 |
Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | DAM; ISO 294-4 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 110 MPa | 16000 psi | ISO 527-1/-2 |
Elongation at Break | 7.0 % | 7.0 % | ISO 527-1/-2 |
Tensile Modulus | 6.00 GPa | 870 ksi | ISO 527-1/-2 |
Charpy Impact Unnotched | 6.50 J/cm² @Temperature -30.0 °C |
30.9 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU |
9.50 J/cm² @Temperature 23.0 °C |
45.2 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eU | |
Charpy Impact, Notched | 1.10 J/cm² @Temperature -30.0 °C |
5.24 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
2.20 J/cm² @Temperature 23.0 °C |
10.5 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 220 °C | 428 °F | 10°C/min (DAM); ISO 11357-1/-3 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 |
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | IEC 60093 |
Dielectric Constant | 5.0 @Frequency 1e+6 Hz |
5.0 @Frequency 1e+6 Hz |
IEC 60250 |
14 @Frequency 100 Hz |
14 @Frequency 100 Hz |
IEC 60250 | |
Dissipation Factor | 0.12 @Frequency 1e+6 Hz |
0.12 @Frequency 1e+6 Hz |
IEC 60250 |
0.30 @Frequency 100 Hz |
0.30 @Frequency 100 Hz |
IEC 60250 |
Descriptive Properties | Value | Comments |
---|---|---|
Injection molding | Yes | |
With Fillers | Yes |