BASF Nypel® 2367G HS BK 15/25% Glass/Mineral Filled PA6 (Dry)

Category	Polymer , Renewable/Recycled Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced
Manufacturer	BASF
Trade Name	Nypel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Nypel® 2367G HS BK 15/25% Glass/Mineral Filled PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Nypel 2367G HS BK-4 is a black pigmented, heat stabilized, 40% mineral and glass fiber reinforced injection molding compound based on recycled PA6 feedstocks. It possesses a balance of engineering properties in combination with excellent dimensional stability, low warp and good resistance to sink-mark formation. It is available in natural and black.

Physical Properties	Metric	English	Comments
Density	1.48 g/cc	0.0535 lb/in³	ISO 1183
Water Absorption	0.90 %	0.90 %	24 hour; ISO Test
	5.7 %	5.7 %	ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	23°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0040 cm/cm	0.0040 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	121	121	ASTM Test
Tensile Strength at Break	120 MPa	17400 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	120 MPa	17400 psi	5mm/min; ISO 527
Elongation at Break	3.0 %	3.0 %	5mm/min; ISO 527
	3.0 %	3.0 %	0.2 in/min; ASTM Test
Flexural Strength	170 MPa	24700 psi	ISO Data
Flexural Modulus	6.63 GPa	962 ksi	ISO Data
	7.59 GPa	1100 ksi	ASTM Test
Izod Impact, Notched	0.500 J/cm @Thickness 3.17 mm	0.937 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	5.00 kJ/m²	2.38 ft-lb/in²	ISO Test
Charpy Impact Unnotched	4.80 J/cm²	22.8 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.450 J/cm²	2.14 ft-lb/in²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	31.0 µm/m-°C @Temperature -30.0 - 30.0 °C	17.2 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	217 °C	423 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	198 °C	388 °F	ISO 75
	203 °C	397 °F	ASTM Test

Descriptive Properties	Value	Comments
Color	BK
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding

Users viewing this material also viewed the following: