BASF Capron® 8202 NL Nylon 6 (Conditioned) (discontinued **)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Capron® 8202 NL Nylon 6 (Conditioned) (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line.

Physical Properties	Metric	English	Comments
Density	1.13 g/cc	0.0408 lb/in³	(DAM); ISO 1183
Water Absorption	1.6 %	1.6 %	24 hr. (DAM); ISO 62
	9.5 %	9.5 %	(Beginning DAM); ISO 62
Moisture Absorption at Equilibrium	2.7 %	2.7 %	23°C/50% R.H. (Beginning DAM); ISO 62
Viscosity Measurement	48	48	Formic Acid; ASTM D789
Linear Mold Shrinkage	0.012 cm/cm	0.012 in/in	MD; ASTM Test

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	60.0 MPa	8700 psi	0.2 in/min; ASTM D638
Tensile Strength, Ultimate	80.0 MPa @Temperature -40.0 °C	11600 psi @Temperature -40.0 °F	ASTM D638
	80.0 MPa @Temperature -40.0 °C	11600 psi @Temperature -40.0 °F	ISO 527
Tensile Strength, Yield	36.0 MPa	5220 psi	50 mm/min; ISO 527
	36.0 MPa	5220 psi	2 in/min; ASTM D638
	21.0 MPa @Temperature 120 °C	3050 psi @Temperature 248 °F	ASTM D638
	21.0 MPa @Temperature 120 °C	3050 psi @Temperature 248 °F	ISO 527
	30.0 MPa @Temperature 80.0 °C	4350 psi @Temperature 176 °F	ASTM D638
	30.0 MPa @Temperature 80.0 °C	4350 psi @Temperature 176 °F	ISO 527
	110 MPa @Temperature -40.0 °C	16000 psi @Temperature -40.0 °F	ASTM D638
	110 MPa @Temperature -40.0 °C	16000 psi @Temperature -40.0 °F	ISO 527
Elongation at Break	>= 50 %	>= 50 %	50 mm/min; Nominal; ISO 527
	>= 100 %	>= 100 %	2 in/min; ASTM D638
	2.5 % @Temperature -40.0 °C	2.5 % @Temperature -40.0 °F	ASTM D638
Elongation at Yield	16 %	16 %	50 mm/min; ISO 527
	16 %	16 %	2 in/min; ASTM D638
	35 % @Temperature 80.0 °C	35 % @Temperature 176 °F	ASTM D638
	40 % @Temperature 120 °C	40 % @Temperature 248 °F	ASTM D638
Tensile Modulus	0.970 GPa	141 ksi	1 mm/min; ISO 527
Flexural Strength	35.0 MPa	5080 psi	ASTM D790
	155 MPa @Temperature -40.0 °C	22500 psi @Temperature -40.0 °F	ASTM D790
Flexural Modulus	0.740 GPa	107 ksi	ASTM D790
	3.66 GPa @Temperature -40.0 °C	531 ksi @Temperature -40.0 °F	ASTM D790
Izod Impact, Notched	NB	NB	ASTM D256
	0.450 J/cm @Temperature -40.0 °C	0.843 ft-lb/in @Temperature -40.0 °F	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	10 K/min (DAM)
	220 °C	428 °F	(DAM); ASTM D3418

Descriptive Properties	Value	Comments
Additive	Unfilled
Color	Natural
Commercial Status (March 2007)	Active America
FDA	21 CFR 177.1500
Form	Pellets
Impact Modified	No
Injection molding	Processable
Primary Processing Technique	Film Extrusion

Users viewing this material also viewed the following: