Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass Fiber Filled, Flame Retardant |
Manufacturer | Azoty Tarnow™ (Zaklady Azotowe) |
Trade Name | Tarnamid® |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Azoty Tarnow™ Tarnamid® T-27 GF40 FRV0 Polyamide 6 - Flame Retarded, Reinforced.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.50 g/cc | 1.50 g/cc | ISO 1183 |
Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4 |
Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | ISO 294-4 |
Melt Flow | 25 g/10 min @Load 5.00 kg, Temperature 275 °C |
25 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Ball Indentation Hardness | 150 MPa @Load 36.5 kg |
21800 psi @Load 80.5 lb |
cond.; ISO 2039-1 |
240 MPa @Load 36.5 kg |
34800 psi @Load 80.5 lb |
dry; ISO 2039-1 | |
Tensile Strength | 105 MPa | 15200 psi | cond.; ISO 527 |
165 MPa | 23900 psi | dry; ISO 527 | |
Elongation at Break | 4.0 % | 4.0 % | dry; ISO 527 |
5.5 % | 5.5 % | cond.; ISO 527 | |
Tensile Modulus | 8.20 GPa | 1190 ksi | cond.; ISO 527 |
14.0 GPa | 2030 ksi | dry; ISO 527 | |
Flexural Strength | 135 MPa | 19600 psi | cond.; ISO 178 |
240 MPa | 34800 psi | dry; ISO 178 | |
Charpy Impact Unnotched | 7.00 J/cm² | 33.3 ft-lb/in² | dry; ISO 179 1eU |
8.00 J/cm² | 38.1 ft-lb/in² | cond.; ISO 179 1eU | |
Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | dry; ISO 179 1eA |
1.20 J/cm² | 5.71 ft-lb/in² | cond.; ISO 179 1eA |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 221 °C | 430 °F | |
Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | 374 °F | cond.; ISO 75 |
200 °C | 392 °F | dry; ISO 75 | |
Vicat Softening Point | 200 °C @Load 5.10 kg |
392 °F @Load 11.2 lb |
cond.; ISO 306 |
205 °C @Load 5.10 kg |
401 °F @Load 11.2 lb |
dry; ISO 306 | |
Flammability, UL94 | V-0 @Thickness 1.60 mm |
V-0 @Thickness 0.0630 in |
|
Glow Wire Test | 960 °C @Thickness 2.00 mm |
1760 °F @Thickness 0.0787 in |
PN-EN-60695-2-12 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | IEC 93 |
Dielectric Strength | 28.0 kV/mm | 711 kV/in | IEC 243-1 |
Comparative Tracking Index | 525 V | 525 V | IEC 112 |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Melt Temperature | 230 - 290 °C | 446 - 554 °F | |
Mold Temperature | 60.0 - 120 °C | 140 - 248 °F | 80 - 90°C is recommended |
Drying Temperature | 75.0 - 100 °C @Time 7200 - 14400 sec |
167 - 212 °F @Time 2.00 - 4.00 hour |
|
Moisture Content | <= 0.10 % | <= 0.10 % | |
Injection Pressure | 80.0 - 130 MPa | 11600 - 18900 psi | 80 MPa is recommended |