Arlon Thermabond® 99A60X008 0.008" (0.203 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier

Category	Polymer , Thermoset , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled
Manufacturer	Arlon
Trade Name	Thermabond®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arlon Thermabond® 99A60X008 0.008" (0.203 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Primerless Thermabond®: Electrically insulating, thermally conductive, electronic adhesive. Bonds without primer.Design/Construction: Liner: FEPProduct: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassProduct Use: Thermally conductive adhesiveAppearance: Gray gum on brown and clear linersThis data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division

Physical Properties	Metric	English	Comments
Density	2.60 g/cc	0.0939 lb/in³	Silicone Property; Arlon SQA-TMS-024
Thickness	25.4 microns	1.00 mil	Liner
	76.2 microns	3.00 mil	Carrier
	203 microns	8.00 mil	Overall; Arlon SQA-TMS-003

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	57	57	Silicone Property; ASTM D2240
Tensile Strength	2.28 MPa	330 psi	Silicone Property; ASTM D412
Elongation at Break	170 %	170 %	Silicone Property; ASTM D412
Modulus of Elasticity	0.00159 GPa	0.230 ksi	Silicone Property; Arlon SQA-TMS-008
Poissons Ratio	0.50	0.50	Approximately, Silicone Property
Shear Modulus	0.345 GPa @Strain <=100 %	50.0 ksi @Strain <=100 %	ASTM D1002
Shear Strength	2.21 MPa	320 psi	Lap Shear Strength; ASTM D1002

Thermal Properties	Metric	English	Comments
CTE, linear	128 µm/m-°C	71.1 µin/in-°F	Silicone Property; ASTM E 831
Specific Heat Capacity	0.900 J/g-°C @Temperature 100 °C	0.215 BTU/lb-°F @Temperature 212 °F	Silicone Property; ASTM E 1952
Thermal Conductivity	2.30 W/m-K	16.0 BTU-in/hr-ft²-°F	Product Property; ASTM E 1530
	1.40 W/m-K @Temperature 100 °C	9.72 BTU-in/hr-ft²-°F @Temperature 212 °F	Silicone Property; ASTM E 1530
Maximum Service Temperature, Air	204.0 °C	399.2 °F
Minimum Service Temperature, Air	-100 °C	-148 °F
Glass Transition Temp, Tg	-120 °C	-184 °F	Silicone Property; ASTM D3418

Electrical Properties	Metric	English	Comments
Dielectric Constant	5.9 @Frequency 1.00e+6 Hz	5.9 @Frequency 1.00e+6 Hz	D<sub>k</sub>, Silicone Property; IPC TM 650-2.5.5.3
Dielectric Strength	33.5 kV/mm	850 kV/in	ASTM D149
Dissipation Factor	0.0040 @Frequency 1.00e+6 Hz	0.0040 @Frequency 1.00e+6 Hz	D<sub>f</sub>, Silicone Property; IPC TM 650-2.5.5.3

Processing Properties	Metric	English	Comments
Cure Time	15.0 min	0.250 hour	After Thermabond® temperature reaches 100°C, Recommended Cure Cycle
Shelf Life	6.00 Month @Temperature 4.44 - 10.0 °C	6.00 Month @Temperature 40.0 - 50.0 °F	From date of manufacture

Descriptive Properties	Value	Comments
Color	Gray
Plasticity	2.2 mm	Arlon SQA-TMS-005
Total Product Weight (g/m2)	528	Arlon SQA-TMS-025

Users viewing this material also viewed the following: