- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone Rubber
- Silicone, Molded, Glass Fiber Filled
- Arlon 44570XB025 0.025" Uncured Silicone Rubber with Fiberglass
Arlon 44570XB025 0.025" Uncured Silicone Rubber with Fiberglass
| Category | Polymer , Thermoset , Silicone , Silicone, Molded, Glass Fiber Filled |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon 44570XB025 0.025" Uncured Silicone Rubber with Fiberglass.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Design/Construction:Interleave: 2.5 mil PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style 1165 FiberglassThis data represents typical values for the production material and should not be used as material specifications.Information provided by ARLON Silicone Technologies Division.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.22 g/cc | 0.0441 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
| Thickness | 127 microns | 5.00 mil | Substrate; Arlon SQA-TMS-003 |
| 508 microns | 20.0 mil | Silicone; Arlon SQA-TMS-003 | |
| 635 microns | 25.0 mil | Overall Thickness; Arlon SQA-TMS-003 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 45 | 45 | Silicone Property; ASTM D2240 |
| Tensile Strength | 6.38 MPa | 925 psi | Silicone Property; ASTM D412 |
| Elongation at Break | 550 % | 550 % | Silicone Property; ASTM D412 |
| Peel Strength | 3.86 kN/m | 22.0 pli | Bond Strength; Arlon SQA-TMS-011 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Inert | 232 °C | 450 °F | |
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 29.5 kV/mm | 750 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 204 °C |
2.00 hour @Temperature 400 °F |
Recommended Post Cure Cycle |
| 15.0 min @Pressure 0.345 MPa, Temperature 149 °C |
0.250 hour @Pressure 50.0 psi, Temperature 300 °F |
Recommended Cure Cycle | |
| Shelf Life | 6.00 Month @Temperature 21.1 °C |
6.00 Month @Temperature 70.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Gray | Silicone |
| White | Substrate | |
| Total Product Weight (oz/yd2) | 23.8 | Arlon SQA-TMS-025 |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 79 GF 20 PP, 20% glass fibre, mod. of mech. prop.
- SABIC Innovative Plastics Cycoloy® C2950 PC+ABS (Europe-Africa-Middle East)
- SABIC Innovative Plastics Noryl V0150BT PPE+HIPS (Europe-Africa-Middle East)
- Spartech Polypedic Modified Low Density Polyethylene
- Shin-Etsu Silicones SV-55000U High Strength Silicone Elastomer
- A. Schulman PP 3449-01 Polypropylene Copolymer Polypropylene
- Daikin POLYFLON MG-1030 PTFE 15% Glass Fiber Filled Molding Powder
- Arlon 0.008" (0.2032 mm) Thermabond® E-35 Uncured Silicone (99730N008)
Copyright © lookpolymers.com All Rights Reserved