Arkema Group Rilsan® Fine Powders Grey 49 Polyamide 11

Category	Polymer , Thermoplastic , Nylon , Nylon 11 , Nylon 11, Powder
Manufacturer	Arkema
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arkema Group Rilsan® Fine Powders Grey 49 Polyamide 11.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Rilsan® fine powder coatings offer weatherability, long-lasting adhesion, chalk resistance, chemical resistance to aliphatic hydrocarbons, bases, salt solutions, oils, greases and other petroleum products.Typical Applications:Shopping carts Dishwasher baskets Hand mixers File rods Wire shelvesInformation provided by Arkema Group

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	38.0 - 47.0 MPa	5510 - 6820 psi
Taber Abrasion, mg/1000 Cycles	17	17	CS 17 wheel, 1 kg load

Thermal Properties	Metric	English	Comments
Heat of Fusion	83.7 J/g	36.0 BTU/lb
CTE, linear	150 µm/m-°C @Temperature 20.0 °C	83.3 µin/in-°F @Temperature 68.0 °F

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.50e+14 ohm-cm @Temperature 20.0 °C	3.50e+14 ohm-cm @Temperature 68.0 °F	65% RH at 500 V; ASTM D257
Surface Resistance	2.40e+14 ohm @Temperature 20.0 °C	2.40e+14 ohm @Temperature 68.0 °F	65% RH at 500 V; ASTM D257
Dielectric Constant	3.1 @Frequency 1e+6 Hz	3.1 @Frequency 1e+6 Hz
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz
Dielectric Strength	9.00 kV/mm @Thickness 0.400 mm	229 kV/in @Thickness 0.0157 in	thick

Users viewing this material also viewed the following: