- HOME
- POLYMER SEARCH
- Ceramic/Metallic Coating
- Aremco Corr-Paint™ CP4050 High Temperature Protective Coating Silicone
Aremco Corr-Paint™ CP4050 High Temperature Protective Coating Silicone
| Category | Other Engineering Material , Ceramic/Metallic Coating , Polymer , Thermoset , Silicone |
| Manufacturer | Aremco |
| Trade Name | Corr-Paint™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Corr-Paint™ CP4050 High Temperature Protective Coating Silicone.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Low viscosity, green coating for power resistors to 1100°F (593°C)
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.31 g/cc | 1.31 g/cc | |
| Solids Content | 39.5 % | 39.5 % | by volume |
| 48.5 % | 48.5 % | by weight | |
| Volatile Organic Compounds (VOC) Content | 117 g/l | 117 g/l | |
| Viscosity | 500 - 750 cP | 500 - 750 cP | |
| Thickness | 25.4 microns | 1.00 mil | recommended dry film thickness |
| 64.3 microns | 2.53 mil | estimated wet film thickness | |
| Storage Temperature | 12.8 - 29.4 °C | 55.0 - 85.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 593 °C | 1100 °F | |
| Flash Point | >= 100 °C | >= 212 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 10.0 - 48.9 °C | 50.0 - 120 °F | Application Temperature |
| Dry Time | 1 hour | 1 hour | Handling |
| 2 hour | 2 hour | Touch | |
| >= 2.5 hour | >= 2.5 hour | Recoat | |
| Cure Time | >= 60.0 min | >= 1.00 hour | Air Set prior to curing |
| 45.0 min @Temperature 232 °C |
0.750 hour @Temperature 450 °F |
Adequate ventilation is required when curing these products. Outgassing will occur above 300°F and cease after 750°F. An additional 30 minutes is required at the highest service temperature if service temperature is below 750°F. | |
| Shelf Life | 6.00 Month | 6.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Green | |
| Dry Film Coverage ft2/gal | 634 | at 1 mil |
| Thinner | Butyl Cellosolve/Water |
Users viewing this material also viewed the following:
- Overview of materials for Polytetrafluoroethylene (PTFE), Carbon Fiber Filled
- Kinlead PL13 Lamination Grade BOPP Plain Film (thickness: 15 µm)
- Minelco Premier Periclase Sinter Magnesia
- Heraeus Cleviosâ„¢ P HC V4 Conductive Sulfonate Polymer for Antistatic Coatings
- Samsung Cheil Industries Starex® LX-0971 S ABS, Unreinforced Metallic-Look
- ELASTO UK Dryflex® 8006-101 Flame Retardant TPE for Injection Molding, Natural, Halogen Free
- Cytec Thornel® P-75S 2K Carbon Fiber, Pitch Precursor
- 3M Scotch® 3781 Industrial Continuous Taping System Tape
Copyright © lookpolymers.com All Rights Reserved