- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Aremco Aremco-Bond™ 631 High Performance Epoxide
Aremco Aremco-Bond™ 631 High Performance Epoxide
| Category | Polymer , Adhesive , Thermoset , Epoxy |
| Manufacturer | Aremco |
| Trade Name | Aremco-Bond™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Bond™ 631 High Performance Epoxide.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Clear-Amber, 1:1, Good Bond Strength and Corrosion Resistance.Also available filled with aluminum oxide (Alumina) or pigments.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | |
| Viscosity | 25000 cP | 25000 cP | Mixed Viscosity |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 75 | 75 | |
| Flexural Strength | 70.3 MPa | 10200 psi | ASTM D790 |
| Shear Strength | 20.7 MPa | 3000 psi | ASTM D1002-94 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 48.6 µm/m-°C @Temperature 20.0 °C |
27.0 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 204 °C | 400 °F | |
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |
| Shrinkage | 0.20 % | 0.20 % | Cure Shrinkage |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.20e+14 ohm-cm | 1.20e+14 ohm-cm | |
| Dielectric Constant | 3.12 @Frequency 1000 Hz |
3.12 @Frequency 1000 Hz |
|
| Dielectric Strength | 17.3 kV/mm | 440 kV/in | |
| Dissipation Factor | 0.010 | 0.010 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 93.3 °C |
2.00 hour @Temperature 200 °F |
Recommended Cure |
| 1440 - 2880 min @Temperature 23.0 °C |
24.0 - 48.0 hour @Temperature 73.4 °F |
at RT, Alternate Cure | |
| Pot Life | 240 min @Temperature 25.0 °C |
240 min @Temperature 77.0 °F |
100 gm mass |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Chemical Resistance | Good | |
| Color | Amber | |
| Mix Ratio By Weight | 1:1 | resin:hardener |
Users viewing this material also viewed the following:
- Nylene® 601 Nylon 6, Extrusion Grade
- Industrial Laminates/Norplex NP842 Paper Base Laminate (discontinued **)
- Momentive Performance Materials AC6069 Boron Nitride (BN) Powder
- Haynes 214® alloy, 40% cold reduction, 980°C (1800°F) for 5 minutes
- Shamrock Technologies NanoFLON® P 40A Thermoplastic Grade PTFE Additive
- Silberline 4-Allâ„¢ E3053
- Schott N-KZFS8 Glass
- Tra-Con Tra-Cast 3104 Low Viscosity Epoxy Casting Compound
- CeramTec Rubalit® 708 HP Alumina, 96% (High Performance)
- H.C. Starck Amperit® 335.066 Nickel Self-fluxing Alloy HRC 60 (NiCrBSi)
Copyright © lookpolymers.com All Rights Reserved