- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane (TPUR), Polyether Grade
- AdvanSource Biomaterials HYDROTHANE™ Hydrophilic Thermoplastic Polyurethane
AdvanSource Biomaterials HYDROTHANE™ Hydrophilic Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane (TPUR), Polyether Grade |
| Manufacturer | AdvanSource Biomaterials (formerly CardioTech International) |
| Trade Name | HYDROTHANE™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | AdvanSource Biomaterials HYDROTHANE™ Hydrophilic Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
AdvanSource Biomaterials Corporation manufactures and markets hydrophilic high slip, high water absorptive, polyether aliphatic polyurethanes designed for use as coatings of catheters, sutures, introducers, rods, valves and rubber products. Hydroslip C polymers can also be coated onto silicon microdevices to reduce absorption of white cells and proteins on the devices, thereby aiding in the analysis of blood and DNA.Information provided by AdvanSource Biomaterials Corporation.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | <= 85 | <= 85 | Wet (24 Immersion) |
| <= 93 | <= 93 | Very Dry (Desiccated) | |
| <= 95 | <= 95 | In Normal Atmosphere | |
| Tensile Strength, Ultimate | 38.6 MPa | 5600 psi | Wet (24 Immersion) |
| 40.0 MPa | 5800 psi | In Normal Atmosphere | |
| 53.8 MPa | 7800 psi | Very Dry (Desiccated) | |
| Elongation at Break | 475 % | 475 % | In Normal Atmosphere |
| 500 % | 500 % | Wet (24 Immersion) | |
| 580 % | 580 % | Very Dry (Desiccated) |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Zone 1 | 170 °C | 338 °F | |
| Zone 2 | 185 °C | 365 °F | |
| Zone 3 | 190 °C | 374 °F | |
| Melt Temperature | 175 °C | 347 °F | |
| Drying Temperature | 85.0 °C | 185 °F | |
| Dry Time | >= 3 hour | >= 3 hour | |
| Moisture Content | <= 0.10 % | <= 0.10 % | |
| Dew Point | -5.00 °C | 23.0 °F |
Users viewing this material also viewed the following:
- Fujipoly Industries FG-S Connector
- Solvay Specialty Polymers Amodel® AT-1001L Polyphthalamide (PPA)
- Teknor Apex Telcar® OBC 4475A Thermoplastic Elastomer
- Polyram PlusTek PB702 Nylon 6, UV Stabilized
- A. Schulman POLYAXIS® RLLP621 Flame Retardant, High Density Polyethylene
- Epoxyset Epoxiohm EO-97M Electrically Conductive Epoxy Adhesive
- Colorite Polymers CS9040UL Wire and Cable Jacket Vinyl Compound
- CLAL-MSX NICLAFOR® 1000 THX Quenched/Precipitation Heat Treated, Drawn Copper Alloy
- 3M 950EK Adhesive Transfer Tapes with Adhesive 300
- 3M QSLV-M-8-2/0 Cold Shrink Quick Splice Low Voltage
Copyright © lookpolymers.com All Rights Reserved