- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 40% Glass Fiber Filled
- Adell AR-17 Nylon 66, 35% Glass Reinforced
Adell AR-17 Nylon 66, 35% Glass Reinforced
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 40% Glass Fiber Filled |
| Manufacturer | Adell Plastics, Inc. |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Adell AR-17 Nylon 66, 35% Glass Reinforced.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Adell Plastics, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.39 g/cc | 0.0502 lb/in³ | ASTM D792 |
| Water Absorption | 0.80 % | 0.80 % | 24 hour immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0035 cm/cm | 0.0035 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 98 | 98 | ASTM D785 |
| Hardness, Rockwell R | 122 | 122 | ASTM D785 |
| Tensile Strength, Ultimate | 186 MPa | 27000 psi | ASTM D638 |
| Elongation at Break | 3.5 % | 3.5 % | ASTM D638 |
| Flexural Strength | 265 MPa | 38400 psi | ASTM D790 |
| Flexural Modulus | 9.00 GPa | 1310 ksi | ASTM D790 |
| Compressive Yield Strength | 245 MPa | 35500 psi | ASTM D695 |
| Izod Impact, Notched | 1.10 J/cm | 2.06 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 263 °C | 505 °F | ASTM D789 |
| Deflection Temperature at 0.46 MPa (66 psi) | >= 249 °C | >= 480 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 249 °C | 480 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
Users viewing this material also viewed the following:
- Polimeri Europa Edistir ICE R 830D Polystyrene
- ExxonMobil Vyram™ 9103-54 Thermoplastic Elastomer (discontinued **)
- Samsung Cheil Industries Starex® WX-9300 ASA, Unreinforced Heat Resistant
- Teknor Apex Sinpolene MBW2442 Low Density Polyethylene
- DuPont Elvaloy® 1913 AC Ethylene and 13% Methyl Acrylate Copolymer
- Polyram PlusTek PB330I6 Nylon 6 for Injection Molding, 30% Mineral and Glass-fiber Filled
- Arlon R35948R015 0.0155" (0.394 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material
- Teknor Apex APEX® 7500-85 Polyvinyl Chloride, Flexible
Copyright © lookpolymers.com All Rights Reserved