- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene Copolymer
- Addiplast Addilene J 326 V30 Polypropylene Copolymer
Addiplast Addilene J 326 V30 Polypropylene Copolymer
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene Copolymer |
| Manufacturer | Addiplast |
| Trade Name | Addilene |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Addiplast Addilene J 326 V30 Polypropylene Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High modulus, high durabilityInformation provided by Addiplast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183/A |
| Melt Flow | 5.0 g/10 min | 5.0 g/10 min | ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 73 | 73 | ISO 868 |
| Tensile Strength at Break | 60.0 MPa | 8700 psi | ISO R 527 |
| Elongation at Yield | 2.0 % | 2.0 % | ISO R 527 |
| Modulus of Elasticity | 5.50 GPa | 798 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 7.50 kJ/m² | 3.57 ft-lb/in² | ISO 180/1A |
| Charpy Impact Unnotched | 3.80 J/cm² | 18.1 ft-lb/in² | ISO 179/IeU |
| Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | ISO 179/IeA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 165 - 168 °C | 329 - 334 °F | ISO 3146/C2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 140 °C | 284 °F | ISO 75-2/AF |
| Vicat Softening Point | 160 °C | 320 °F | ISO 306/A50 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+14 ohm-cm | >= 1.00e+14 ohm-cm | CEI 60093 |
| Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | CEI 60093 |
| Comparative Tracking Index | >= 600 V | >= 600 V | CEI 60112/Solution A |
Users viewing this material also viewed the following:
- Ohio Carbon Blank OCB AR-14 EDM Grade Graphite
- Michelman® FiberMax® 5000 Water based medium treatment to replace paraffin wax
- Ipiranga Petrochem PH 0133 Polypropylene
- Lubriplate L0807 Non-Detergent Motor Oil Motor Oil & Transmission Fluid
- Master Bond EP112FLAN-1 Two Component Flexibilized Heat Curing Epoxy
- A. Schulman FORMION™ FI 120 Non-Reinforced, Injection Molding Grade Zinc Ionomer
- A. Schulman LP477-01 High-Density Polyethylene
- DuPont Performance Polymers Crastin® S620F20 BK851 Polybutylene Terephthalate (PBT) (Unverified Data**)&l
- Cheng Yu Plastic IPS600UV Flame Retardant HIPS
- Beijing Evergrow Resources ER-WR-30G Polypropylene Super-Fine Filter Material
Copyright © lookpolymers.com All Rights Reserved