Polymer Property : Dielectric Strength = 440 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Dielectric Strength	17.3 kV/mm	440 kV/in
Resinlab® EP1320 Heat Cure Epoxy Conformal Coating Resinlab™ EP1320 and EP1320LV are one part heat cure epoxy conformal coatings. They can also be used as a small mass potting compounds, structural adhesives, or insulating polymer systems where the..
Dielectric Strength	17.3 kV/mm	440 kV/in
Resinlab® EP1330LV Heat Cure Epoxy Polymer System Resinlab™ EP1330 and EP1330LV are one part heat cure epoxy polymer systems. They can also be used as a small mass potting or staking compounds, or a dam adhesive in and “dam and fill” application..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 GF4 IM L LE Availability: North AmericaForms: PelletsAdditive: Lubricant and Impact ModifierFeatures: Lubricant, Low Extractables and Impact ModifiedAppearance: Natural ColorInformation provided by TP Composite..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 GF43 IM L 43% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 43% Filler by WeightAdditive: Lubricant and Impact ModifierFeatures: Lubricant and Impact ModifiedTPCI# 6439..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 IM 408 L Nylon 66 Availability: North AmericaForms: PelletsAdditive: Lubricant and Impact ModifierFeatures: Lubricant and Impact ModifiedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc...
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 IM L W Nylon 66 Availability: North AmericaForms: PelletsAdditive: Lubricant and Impact ModifierFeatures: Lubricant and Impact ModifiedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc...
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFill FRÂ® PC IM FR Availability: North AmericaForms: PelletsAdditive: Impact ModifierFeatures: Flame Retardant and Impact ModifiedProcessing Method: Injection MoldingInformation provided by TP Composites, Inc.
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6/6 GB36 IM1 36% Glass Bead Filler Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 36% Filler by WeightAdditive: Impact ModifierFeatures: Impact ModifiedInformation provided by TP Composites, Inc.
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6/6 GF33 BK024 33% Glass Filled (Dry) Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightAdditive: LubricantFeatures: Lubricated Appearance: BlackInformation provided by TP Comp..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6/6,6 GF33 HS L BK 33% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightAdditive: LubricatedFeatures: LubricatedProcessing Method: Injection MoldingAppearance: ..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES LuriblendÂ® TPX-PA6-03034 Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber ReinforcementAdditive: LubricantFeatures: Lubricated, Good Wear Resistance and Low FrictionAppearance: BlackInformation pro..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES PlastiblendÂ® PA6/6 GF40 IM HS L BK 40% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 40% Filler by WeightAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Impac..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES PlastiblendÂ® PA6/6,6 IM 3757 Nylon 6/66 Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Copolymer, Impact Modified and LubricatedProcessing Method: Injection Mold..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 GF33 IM HS L BKN 33% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubri..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 IM 3757 HS L Nylon 66 Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Fast Molding Cycle, High Flow, Heat Stabilized, Lubricant and Impact ModifiedProcessing Met..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES ElastoblendÂ® PA6/6 IM X Nylon 66 Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Lubricant and Impact ModifiedProcessing Method: Injection MoldingInformation provided by TP..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFill FRÂ® PA6/6 GF25 FR NAT003 25% Glass Filled (Dry) Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber, 25% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Flame Retardant, Heat Stabilized and LubricatedUL Fil..
Dielectric Strength	>= 17.3 kV/mm @Thickness 3.17 mm	>= 440 kV/in @Thickness 0.125 in
Master Bond EP112 Low Viscosity Heat Curing Cycloaliphatic Epoxy Adhesive Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical & e..
Dielectric Strength	17.3 kV/mm @Thickness 3.17 mm	440 kV/in @Thickness 0.125 in
Master Bond EP21LV-LO Two Component, Lower Viscosity, Room Temperature Curing Epoxy System Product Description: Master Bond EP21LV-LO is a two component, lower viscosity, room temperature curing epoxy system for high performance bonding, sealing, coating and encapsulation. This user frien..
Dielectric Strength	17.3 kV/mm	440 kV/in
Master Bond EP30HT-LO NASA Low Outgassing, Optically Clear Coating Description: Master Bond EP30HT-LO is a moderate viscosity, two component epoxy adhesive formulated to cure at room temperature or more rapidly at elevated temperatures, with a four to one mix ratio..
Dielectric Strength	17.3 kV/mm	440 kV/in	ASTM D149
Plastics Group Polifil® 628-33GF Glass Fiber-Reinforced Nylon 6/6 (DAM) Polifil® GFN/MRN 6/6 reinforced series of compounds offer superior strength, rigidity and creep resistance. Glass fibers provide excellent thermal and dimensional stability while maintaining good h..
Dielectric Strength	17.3 kV/mm @Thickness 3.17 mm	440 kV/in @Thickness 0.125 in
Master Bond EP21LSCL-1 Two Component, Room Temperature Curing Epoxy Resin Product Description: Master Bond Polymer System EP21LSCL-1 is a two component, low viscosity epoxy resin system featuring optical clarity as well as non-yellowing properties. This system can be used..
Dielectric Strength	17.3 kV/mm	440 kV/in
Master Bond EP30LV Optically Clear, Low Viscosity Epoxy Adhesive Description: Master Bond Polymer System EP30LV is a low viscosity, two component epoxy adhesive for general purpose bonding, coating, sealing and casting formulated to cure at room temperature or mo..
Dielectric Strength	>= 17.3 kV/mm @Thickness 3.17 mm	>= 440 kV/in @Thickness 0.125 in
Master Bond EP41SMed Two Component, Low Viscosity, USP Class VI Epoxy System Master Bond Polymer Adhesive EP41S Medical is a two component low viscosity epoxy resin system for high performance bonding, sealing, coating, as well as small encapsulations, pottings and castings...
Dielectric Strength	17.3 kV/mm	440 kV/in	ASTM D149
Arlon 55589G028 0.0295" (0.749 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Interleave: PolyethyleneLayer 2: Uncured Silicone Rubber Layer 1: Cured Silicone Rubber Substrate: 162 Style FiberglassAppearance: Green silicone gum and rubber on fiberglass Th..
Dielectric Strength	>= 17.3 kV/mm	>= 440 kV/in
Arlon 44250R011 0.011" (0.279 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone RubberAppearance: Red silicone gum on fiberglass clothThis data represents typical values for the production material. The data should not be used to wri..
Dielectric Strength	17.3 kV/mm	440 kV/in
Resinlab® EP1026HP Epoxy Adhesive Resinlab™ EP1026HP is a high performance fast setting epoxy adhesive designed for bonding metals, ceramics, glass and most plastics. This product gives good resistance to water salt spray, inorgan..
Dielectric Strength	17.3 kV/mm	440 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFill FR® PPO/HIPS MM20 FR 20% Mineral Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Mineral Filler, 20% Filler by Weight Features: Flame RetardantInformation provided by TP Composites, Inc.
Dielectric Strength	17.3 kV/mm	440 kV/in	ASTM D149
Owens Corning Glass Fiber Reinforced Polypropylene, 20 wt.% glass Polypropylene provides good resistance to acids, alkalis and organic solvents even at higher temperatures. It is, however, soluble in chlorinated hydrocarbons. Data provided by the manufacturer, Ow..
Dielectric Strength	17.3 kV/mm	440 kV/in
Resinlab® EP1121 Black Electronic Grade Epoxy Encapsulant Resinlab™ EP1121 Black is a two part unfilled electronic grade epoxy encapsulant designed for small to medium sized castings. It cures completely at room temperature to a tough, flexible polymer. I..