Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 960 min @Temperature 82.2 °C |
16.0 hour @Temperature 180 °F |
Complete Cure Cycle |
Northstar Polymers MSB-A95A High Performance Polyurethane Cast Elastomer System This is a Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires high tensile strength, cut/tear resistance, dry-abrasio.. |
|||
Cure Time | 960 - 1440 min @Temperature 82.2 °C |
16.0 - 24.0 hour @Temperature 180 °F |
Complete Cure Cycle |
Northstar Polymers MSS-A80AQ High Performance Polyurethane Cast Elastomer System 80A This is a Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires high tensile strength, cut/tear resistance, dry-abrasio.. |
|||
Cure Time | 960 - 1440 min @Temperature 82.2 °C |
16.0 - 24.0 hour @Temperature 180 °F |
Complete Cure Cycle |
Northstar Polymers MSS-A85BQ High Performance Polyurethane Cast Elastomer System 85A This is a Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires high tensile strength, cut/tear resistance, dry-abrasio.. |
|||
Cure Time | 960 min @Temperature 82.2 °C |
16.0 hour @Temperature 180 °F |
Complete Cure Cycle |
Northstar Polymers MSS-A90A High Performance Polyurethane Cast Elastomer System 90A This is a Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires high tensile strength, cut/tear resistance, dry-abrasio.. |
|||
Cure Time | 960 min @Temperature 82.2 °C |
16.0 hour @Temperature 180 °F |
Complete Cure Cycle |
Northstar Polymers MGG-A70DQ High Performance Polyurethane Cast Elastomer System 70A This is a PTMEG/MDI base high-performance polyurethane casting system. This system is recommended to applications in which the part requires high rebound, slide abrasion, constant water contact and.. |
|||
Cure Time | 960 min @Temperature 82.2 °C |
16.0 hour @Temperature 180 °F |
Complete Cure Cycle |
Northstar Polymers MGP-D50A High Performance Polyurethane Cast Elastomer System 50D This is a PTMEG/MDI base high-performance polyurethane casting system. This system is recommended to applications in which the part requires some load-bearing, slide abrasion, constant water contac.. |
|||
Cure Time | 960 min @Temperature 82.0 °C |
16.0 hour @Temperature 180 °F |
|
Tra-Con Tra-Bond 9392 Flexible Potting Epoxy Adhesive TRA-BOND 9392 is a low viscosity, two-part polyurethane formulation recommended for potting and molding where flexibility and temperature resistance are required. TRA-BOND 9349 is a room temperature.. |
|||
Cure Time | 960 - 1440 min @Temperature 25.0 °C |
16.0 - 24.0 hour @Temperature 77.0 °F |
|
Trelleborg Emerson & Cuming Eccobond® 15 LV Variable Hardness Low Viscosity Catalyst Emerson & Cuming 15 LV Eccobond® Variable Hardness Low Viscosity CatalystLow viscosity. Easy-to-use, simple mix ratios. Hardness of cured castings can be controlled by the amount of hardener used. .. |
|||
Cure Time | 960 min @Temperature 23.0 °C |
16.0 hour @Temperature 73.4 °F |
|
Loctite® 3171 Deep Potting Polyurethane PottersLoctite® Potting materials are used on electronic device housings to enhance mechanical strength, provide electrical insulation and enhance vibration and shock resistance of assemblies.For e.. |
|||
Cure Time | 960 min @Temperature 23.0 °C |
16.0 hour @Temperature 73.4 °F |
|
Loctite® 3180 Deep Potting Polyurethane PottersLoctite® Potting materials are used on electronic device housings to enhance mechanical strength, provide electrical insulation and enhance vibration and shock resistance of assemblies. For .. |
|||
Cure Time | 960 - 1440 min @Temperature 40.0 °C |
16.0 - 24.0 hour @Temperature 104 °F |
|
Master Bond EP30LV Optically Clear, Low Viscosity Epoxy Adhesive Description: Master Bond Polymer System EP30LV is a low viscosity, two component epoxy adhesive for general purpose bonding, coating, sealing and casting formulated to cure at room temperature or mo.. |
|||
Cure Time | 960 min @Temperature 32.0 °C |
16.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC 858 Abrasion resistant rebuilding and faring composite An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 0.15 mm (60 mils) or m.. |
|||
Cure Time | 960 min @Temperature 10.0 °C |
16.0 hour @Temperature 50.0 °F |
Tack Free |
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t.. |
|||
Cure Time | 960 min @Temperature 10.0 °C |
16.0 hour @Temperature 50.0 °F |
Tack Free |
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It .. |
|||
Cure Time | 960 min @Temperature 10.0 °C |
16.0 hour @Temperature 50.0 °F |
Foot Traffic |
Chesterton ARC CS4 low-viscosity, 100% solids, barrier coating Description: An advanced composite formulated to protect concrete surfaces from harsh chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat in a 2 coat syst.. |
|||
Cure Time | 960 min @Temperature 25.0 °C |
16.0 hour @Temperature 77.0 °F |
Light Load |
Chesterton ARC CS4 low-viscosity, 100% solids, barrier coating Description: An advanced composite formulated to protect concrete surfaces from harsh chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat in a 2 coat syst.. |
|||
Cure Time | 960 min @Temperature 32.0 °C |
16.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC MX1 Vertical Build Extreme Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack. It is applied at a thickness of 6 mm (1/4”).. |
|||
Cure Time | 960 min @Temperature 29.0 °C |
16.0 hour @Temperature 84.2 °F |
Full Chemical |
Chesterton ARC S7 High Temperature & Chemical Resistant Novolac Vinyl Ester Coating Description: ARC S7 is a low VOC, epoxy novolac vinyl ester based coating intended for high temperature exposures in chemically aggressive applications where the risk for thermal cycling may be pres.. |
|||
Cure Time | 960 min @Temperature 80.0 °C |
16.0 hour @Temperature 176 °F |
|
Cytec EN-12 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
Cure Time | 960 min @Temperature 80.0 °C |
16.0 hour @Temperature 176 °F |
|
Cytec EN-13 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
Cure Time | 960 min @Temperature 80.0 °C |
16.0 hour @Temperature 176 °F |
|
Cytec EN-14 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
Cure Time | 960 min @Temperature 80.0 °C |
16.0 hour @Temperature 176 °F |
|
Cytec EN-2534 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Cure Time | 960 min @Temperature 80.0 °C |
16.0 hour @Temperature 176 °F |
|
Cytec EN-2552 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Cure Time | 960 min @Temperature 80.0 °C |
16.0 hour @Temperature 176 °F |
|
Cytec EN-8 (Conap) Casting, Potting, and Molding Compound High Technology Potting, Casting and Molding CompoundsTwo-component, polybutadiene-based liquid urethane casting and potting systems. When reacted these high technology systems produce tough, stable.. |
|||
Cure Time | 960 min @Temperature 10.0 °C |
16.0 hour @Temperature 50.0 °F |
Tack Free |
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”.. |
|||
Cure Time | 960 min @Temperature 95.0 °C |
16.0 hour @Temperature 203 °F |
|
Abatron AboCast/AboCure 8502-1 Epoxy AboCast/AboCure 8502-1 is a solventless clear Epoxy System, used as a casting, adhesive, and impregnating resin for transformers, capacitors, coils, and other electronic components requiring a low-v.. |
|||
Cure Time | 960 - 1200 min @Temperature 70.0 °C |
16.0 - 20.0 hour @Temperature 158 °F |
1st step |
Abatron AboCast 8502-7/AboCure 8502-7 Colorless, Low-Exotherm Epoxy Casting Compound AboCast 8502-7/AboCure 8502-7 is a rigid, heat cured, colorless, low-exotherm epoxy casting compound for larger masses. It is a 2-component structural and dielectric liquid system with extremely low.. |
|||
Cure Time | 960 min @Temperature 26.0 °C |
16.0 hour @Temperature 78.8 °F |
Full Chemical |
Chesterton ARC NVE VC Vinyl Ester Sealer Description: ARC NVE VC (Veil Coat) is a two-component, modified epoxy novolac vinyl ester sealer coat formulated for application by brush, roller or spray at 0.15-0.25 mm (0.07-0.010”) wet film th.. |
|||
Cure Time | 960 min @Temperature 32.0 °C |
16.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton MRS 10 Metal Rebuilding System Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance It is non-sagging, non-shrinking and 10.. |
|||
Cure Time | 960 min @Temperature 43.0 °C |
16.0 hour @Temperature 109 °F |
Overcoat End |
Chesterton ARC S1HB Sprayable high-viscosity, 100% solids, advanced coating An advanced composite formulated to protect concrete and metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 1-2 mm (40-80 mils) per coat. However, greater si.. |