- HOME
- POLYMER SEARCH
- Polymer Property : Processing Temperature = 21.1 °C
Polymer Property : Processing Temperature = 21.1 °C Product List
Processing PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPC-W44A Polyurethane Gel MPC-W44A is a polyurethane gel formulation specifically designed for padding and cushioning application that requires Shore Durometer OOO scale hardness. Produces good rebound characteristics and g.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MPL-R20B Rigid Polyurethane Foam Formulation This rigid polyurethane foam system is one of a family of polymer systems developed by Northstar Polymers for specific applications. Urethane foams molded with this system exhibit closed cell struct.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MPP-A50A High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPP-A90A High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
| Processing Temperature | 21.1 - 25.0 °C | 70.0 - 77.0 °F | Prepolymer Temperature |
| Northstar Polymers MPP-D65A Polyether Base Polyurethane Resin MPP-D65A is a polyether base 2-component polyurethane resin casting system for molding and potting applications. It has a long pot-life and gradual curing pattern to provide easier handling for mol.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MPP-D80B Rigid Polyurethane MPP-D80B has a high load-bearing property at hardness 80 D Durometer. This material has a relatively slow curing pattern. Whereas many polyurethane formulations of this hardness cure very fast thus.. |
|||
| Processing Temperature | 21.1 - 29.4 °C | 70.0 - 85.0 °F | Curing Agent Temperature |
| Northstar Polymers MPP-F07A Easy Hand-Mixable/Pourable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing with very basic tools such as a cup and stir stick. The components are low-viscosity stable li.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MPP-R02C Semi-rigid Polyurethane Foam Formulation MPP-R02C is semi-rigid foam formulations for molded foam products. It is closed-cell light foam with some structural integrity. Unlike rigid polyurethane foams, the physical properties of a cured pr.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPP-R02C Semi-rigid Polyurethane Foam Formulation MPP-R02C is semi-rigid foam formulations for molded foam products. It is closed-cell light foam with some structural integrity. Unlike rigid polyurethane foams, the physical properties of a cured pr.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPP-R07B Polyurethane Formulation This foam polyurethane formulation is designed yield structural foam by either hand-mixing or machine casting method. The pot-life of this material is long enough to allow manual handling for cast-.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPS-F04A Hand-Mixable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing or by the meter dispensing equipment. The components are stable liquid at room temperature and.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPS-F06B Hand-Mixable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing or by the meter dispensing equipment. The components are stable liquid at room temperature and.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MSB-M25F Microcellular Foam based on High Performance Polyester Polyurethane This high performance polyester microcellular foam system is one of a family of polymer systems developed by Northstar Polymers for demanding work environments. Urethane foams molded with this syste.. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | Prepolymer Temperature |
| Northstar Polymers MSS-A85BQ High Performance Polyurethane Cast Elastomer System 85A This is a Ester/MDI base high-performance polyurethane casting system. This systems is recommended to applications in which the part requires high tensile strength, cut/tear resistance, dry-abrasio.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers VEF-41 Viscoelastic Foam Formulation Viscoelastic foam has a very unique recovery property and very low compression deflection property. When the foam is compressed by a hand it can leave imprint of the hand, and then it slowly recove.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MAP-R06C Semi Rigid Structural Foam Formulation MPP-R06C is a polyurethane foam formulation. It is closed-cell foam with a good structural integrity and an enhanced skin quality. Unlike polyurethane rigid foams, the physical properties of a cured.. |
|||
| Processing Temperature | 21.1 - 25.0 °C | 70.0 - 77.0 °F | Curing Agent Temperature |
| Northstar Polymers MPG-D70A Room-Temperature-Curable Polyurethane Casting Elastomer MPG-D70A is room-temperature-curable polyurethane casting elastomer system designed for molding polyurethane parts with tough, but flexible physical characteristics. The typical applications for th.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
| Northstar Polymers MPP-A80E High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPP-A80E High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers MPS-M23B Room-Temperature Curable Microcellular Foam This foam polyurethane formulation is designed to yield closed-cell microcellular foam by either hand-mixing or machine casting method at room temperature. The components are liquid at room temperat.. |
|||
| Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
| Northstar Polymers SAI-1 Low Viscosity Variable Ratio Polyurethane Gel SAI-1 is custom formulated polyurethane gel material to yield very soft elastomer gel material from low viscosity components at room temperature. This material is variable mixing ratio so that the .. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Backing Compound Epoxy Abrasion-Resistant SystemData provided by Ellsworth Adhesives. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Brushable Ceramic - White Epoxy Precision Repair EpoxyComments: Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth, protective barrier against wear, abrasion, corrosion,.. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Carbide Putty Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon High-Performance Backing Compound Epoxy Abrasion-Resistant SystemData provided by Ellsworth Adhesives. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Sprayable Ceramic™ Epoxy Precision Repair EpoxyComments: A sprayable ceramic-reinforced composite that can be sprayed in a manner similar to high-solid paints. Ideal for protecting pumps, paper machines, stacks, pump pads,.. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Tile Adhesive Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Wear Guard (Fine Load) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Devcon Wear Guard (High Temp) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
| Processing Temperature | 21.1 - 60.0 °C | 70.0 - 140 °F | Average value: 28.9 °C Grade Count:14 |
| Overview of materials for Thermoset Polyurethane Foam, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Thermoset Polyurethane Foam, Unreinforced". Each property range of values reported is minimum and maximu.. |
|||
Copyright © lookpolymers.com All Rights Reserved