Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 71.1 °C | 160 °F | Long Term |
Quadrant EPP Proteus® LDPE - Low Density Polyethylene (ASTM Product Data Sheet) |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Alcoa KAMA 3400 Super High Impact Polystyrene
(discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableMono-layer an.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | Upper limit of working range |
Heatbath/Park High Speed Vacuum Quench Oil Faster quench speed than VQO above, but otherwise very similar. Information provided by Heatbath Corporation - Park Metallurgical. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | Upper limit of working range |
Heatbath/Park Vacuum Quench Oil For use in quenching in integral vacuum furnaces. Offers excellent quenching rate and thermal stability, good viscosity, and low volatility.Information provided by Heatbath Corporation - Park Metal.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Saint-Gobain Norton® V730 Pressure Sensitive Adhesive Sealant Foam Description: Closed cell polyvinyl chloride foam sealant with pressure-sensitive adhesive on one side. The high-tack positioning adhesive grips tight on initial contact and keeps foam in place durin.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Saint-Gobain Norton® V740 Multipurpose Pressure Sensitive Adhesive Sealant Foam Description: Medium Density, Multipurpose Foam: Norseal V740 is a closed-cell polyvinyl chloride foam sealant with pressure-sensitive adhesive on one side designed to provide an economical solution .. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Saint-Gobain Norton® V780 Medium-Density Pressure Sensitive Adhesive Sealant Foam Description: Improved Performance: Norseal® V780 medium density foam sealant combines a closed cell foam substrate with a one-sided pressure-sensitive adhesive. Norseal has been specially formula.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Saint-Gobain Norton® Log Home Foam® V790 Description: Provides Positive Seal in Log Home Joints: Norseal® Log Home Foam® V790 is a medium-density foam specifically developed for log home gasketing. Under a minimum of 25 percent compr.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Saint-Gobain Norton® V770 Low-Density Pressure Sensitive Adhesive Sealant Foam Description: Low Density Foam Suitable for Sealing of Thin Gauge Metals and Plastics. Closed cell polyvinyl chloride foam sealant with pressure sensitive adhesive on one side. The tight bonding adhe.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Saint-Gobain Vendflow® E-70-V-CE Taste Barrier Tubing Formulation Description: Non-plasticized inner bore yeilds no taste: Vendflow® E-70-V-CE is specifically formulated to transfer water and beverages without imparting any "plastic" taste sometimes found in PV.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Loctite® 4081 Cyanoacrylate Adhesive Medical Grade BondersLoctite offers the most comprehensive line of adhesives and sealants available to the medical device industry. These USP class VI and/or ISO-10993 compliant products are designe.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Loctite® 460 Low odor/low bloom Alkoxy Cyanoacrylate Bonding Adhesive Cyanoacrylate Bonding AdhesivesLoctite® technology has made the productivity promises of cyanoacrylate adhesives a reality with the industry's widest selection of high-performance, application-.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M GM110 Gripping Material 3M™ Gripping Material GM110 is based on 3M’s proprietary micro-replicated technology. 3M griping material GM 110 consists of a high-friction surface with a nylon knit backing that provides stretch.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M GM400 Gripping Material 3M™ Gripping Material GM400 is based on 3M’s proprietary micro-replicated technology. 3M™ Gripping Material GM110 is based on 3M’s proprietary micro-replicated technology. 3M griping material GM.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M GM614 Ultra Soft Gripping Material 3M™ Gripping Materials are based on 3M’s proprietary micro-replicated technology. 3M gripping materials consist of a high-friction surface developed to enhance grip and reduce slippage. The plain .. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M GM640 Soft Gripping Material 3M™ Gripping Materials are based on 3M’s proprietary micro-replicated technology. 3M gripping materials consist of a high-friction surface developed to enhance grip and reduce slippage. The plain .. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M Scotch-Weld™ FLX300 Flexible Instant Adhesive 3M™ Scotch-Weld™ Flexible Instant Adhesive FLX (formerly PR851) is formulated for extended resistance to impact, vibration, stress, peel, and humidity applications. It is faster curing than 3M™ S.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M Scotch-Weld™ LO1000 Low Odor Instant Adhesive 3M™ Scotch-Weld™ Low-Odor Instant Adhesives are formulated to have low volatility while maintaining bonding of a wide rage of materials. Low volatility means that these products are not only low o.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M Scotch-Weld™ MG05 LO Medical Grade Instant Adhesive 3M™ Scotch-Weld™ Medical Grade Instant Adhesive are intended for use on a wide variety of materials used in the construction of disposable medical assemblies. They will quickly bond metals, plasti.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M Scotch-Weld™ MG100 LO Medical Grade Instant Adhesive 3M™ Scotch-Weld™ Medical Grade Instant Adhesive are intended for use on a wide variety of materials used in the construction of disposable medical assemblies. They will quickly bond metals, plasti.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M Scotch-Weld™ MG300 FLX Medical Grade Instant Adhesive 3M™ Scotch-Weld™ Medical Grade Instant Adhesive are intended for use on a wide variety of materials used in the construction of disposable medical assemblies. They will quickly bond metals, plasti.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Bostik 2391 Versatile, Good Hot Tack EVA Glue Stick Bostik 2391 Versatile, Good Hot Tack EVA Glue StickVersatile packaging product. Good "hot tack." |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Bostik 6390 Good Heat Resistance, General Purpose EVA Glue Stick Bostik 6390 Good Heat Resistance, General Purpose EVA Glue StickGood heat resistance. Bonds plastics, wood, porous materials. General purpose adhesion. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
Aearo E-A-R Specialty Composites Isodamp® C-1000 Series TPE Isodamp® C-1000 Series TPEs feature high internal damping properties for low amplification at resonance to protect equipment during frequency cycling and random shocks, effective shock protection f.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
3M GM630 Very Soft Gripping Material 3M™ Gripping Materials are based on 3M’s proprietary micro-replicated technology. 3M gripping materials consist of a high-friction surface developed to enhance grip and reduce slippage. The plain .. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Alcoa KAMA 3202 Freezer Modified High Impact Polystyrene
(discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableColors availa.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Loctite® 4031 Cyanoacrylate Adhesive Medical Grade BondersLoctite offers the most comprehensive line of adhesives and sealants available to the medical device industry. These USP class VI and/or ISO-10993 compliant products are designe.. |
|||
Maximum Service Temperature, Air | 71.1 °C | 160 °F | |
Loctite® 4601 Cyanoacrylate Adhesive Medical Grade BondersLoctite offers the most comprehensive line of adhesives and sealants available to the medical device industry. These USP class VI and/or ISO-10993 compliant products are designe.. |
|||
Maximum Service Temperature, Air | 71.0 °C | 160 °F | |
Henkel Hysol EA 960F Paste Adhesive System Fast-set fairing and smoothing compound for exterior aircraft surfaces.Sandable after 6 hours |