- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Quadrant EPP Proteus® LDPE - Low Density Polyethylene (ASTM Product Data Sheet)
Quadrant EPP Proteus® LDPE - Low Density Polyethylene (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Proteus® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Proteus® LDPE - Low Density Polyethylene (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D792 |
| Water Absorption | <= 0.010 % | <= 0.010 % | Immersion, 24hr; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 54 | 54 | ASTM D2240 |
| Tensile Strength | 11.7 MPa | 1700 psi | ASTM D638 |
| Tensile Strength, Yield | 10.3 MPa | 1500 psi | ASTM D638 |
| Elongation at Break | 400 % | 400 % | ASTM D638 |
| Elongation at Yield | 100 % | 100 % | ASTM D638 |
| Tensile Modulus | 0.393 GPa | 57.0 ksi | ASTM D638 |
| Flexural Modulus | 0.200 GPa | 29.0 ksi | ASTM D790 |
| Izod Impact, Notched | NB | NB | ASTM D256 Type A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 110 °C | 230 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 71.1 °C | 160 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 71.1 °C | 160 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | ASTM D257 |
| Surface Resistivity per Square | >= 1.00e+15 ohm | >= 1.00e+15 ohm | ASTM D257 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | Yes | Yes | |
| NSF | No | No | |
| USDA | Yes | Yes | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Unacceptable | Unacceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Unacceptable | Unacceptable | |
| Hydrocarbons - Aromatic | Unacceptable | Unacceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 3 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Fainplast Compounds RH 206/C Rigid PVC, Antishock Extrusion
- Heatbath/Park Sta-Hard 45 Neutral Salt
- Teknor Apex Sinvicomp SIC 3710 Polyvinyl Chloride, Rigid
- A. Schulman POLYBATCH™ Brown 1028 Concentrate Based In Polyethylene
- ExxonMobil LDPE LD 103.09 Low Density Polyethylene Resin
- DuPont Teijin Films Teijin® Tetoron® U2 Polyester Film, 500 Gauge
- E-Polymers TEKAMID® TB120CR Fast Crystallinity PA6 Resin
- Cheng Yu Plastic C1300 PC/ABS
- Ashley Polymers Ashlene® RH180ST Acetal
Copyright © lookpolymers.com All Rights Reserved