Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Plaskolite Optix® CA-81 UVA UV-Absorbing Acrylic Resin Special UV-absorption grade, extrusion and injection moldingApplications: A special UV-absorption acrylic resin for extrusion and injection molding. It is slightly lubricated for ease of processing.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Plaskolite West Optix® CA-81 UVA UV-Absorbing Acrylic Resin Special UV-absorption grade, extrusion and injection moldingApplications: A special UV-absorption acrylic resin for extrusion and injection molding. It is slightly lubricated for ease of processing.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
PTS Trimid® N66-1010L Lubed, Utility Nylon 6/6 Information provided by Polymer Technology and Services, LLC (PTS). |
|||
Tensile Strength, Ultimate | 65.5 - 175 MPa | 9500 - 25400 psi | Average value: 114 MPa Grade Count:60 |
Overview of materials for Syndiotactic Polystyrene (SPS) with Glass or Carbon Fiber This property data is a summary of similar materials in the MatWeb database for the category "Syndiotactic Polystyrene (SPS) with Glass or Carbon Fiber". Each property range of values reported is mi.. |
|||
Tensile Strength, Ultimate | 65.5 - 138 MPa | 9500 - 20000 psi | Average value: 95.2 MPa Grade Count:7 |
Overview of materials for Polycarbonate/Polysulfone Alloy This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/Polysulfone Alloy". Each property range of values reported is minimum and maximum values o.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Rostone Rosite® 3950ES SMC Thermoset Polyester, 25% Glass Reinforced
(discontinued **) Key Features: High Strength; High DielectricElectrical grade material that provides higher flexural and impact strength than Rosite 3550 composites with comparable glass fiber content. 3950ES is fo.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Styron CALIBREâ„¢ 201-22 Polycarbonate Information provided by DowThis product line was spun off from Dow Chemical to Styron in 2010. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | 50 mm/min; ASTM D638 |
Styron CALIBREâ„¢ 2061-22 Polycarbonate CALIBREâ„¢ 2061-22 resin is used in applications involving steam or ethylene oxide for sterilization - though suitability for use in these applications is dependent upon autoclave cycle times and.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM Data |
Styron CALIBRE™ 300EP 22 Polycarbonate, General Purpose CALIBRE® 300EP series resins are general purpose polycarbonate resins and can be supplied with a mold release package, a UV stabilizer package or both. CALIBRE 300EP resins exhibit an excellent p.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM Data |
Styron CALIBRE™ 701 15 Polycarbonate, General Purpose CALIBRE® 701 series polycarbonate resins are a general purpose, transparent, ignition resistant grades equipped with a mold release package. The CALIBRE 701 series resins exhibit a high heat resi.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | 0.125 in, injection molded, unannealed; ASTM D638 |
Styron EMERGEâ„¢ 4310-22 Polycarbonate EMERGEâ„¢ PC 4310-22 advanced resin is high-performance polycarbonate resin offering high heat resistance, toughness, and superior flow. Applications: Consumer Electronics and Information Techn.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | 0.125 in, injection molded, unannealed; ASTM D638 |
Styron EMERGEâ„¢ 4330-22 Polycarbonate EMERGEâ„¢ PC 4330-22 advanced resin is high-performance polycarbonate resin offering ultraviolet light stability, high heat resistance, toughness, and superior flow. Applications: Consumer Elec.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Styron EMERGEâ„¢ 4610-10 Polycarbonate EMERGEâ„¢ PC 4610-10 advanced resin is formulated to deliver both outstanding clarity and enhanced ignition resistance while maintaining excellent physical properties and processability. Applica.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Styron EMERGEâ„¢ 4630-10 Polycarbonate EMERGEâ„¢ PC 4630-10 advanced resin is formulated to supply both excellent ultraviolet stability and enhanced ignition resistance while maintaining excellent physical properties and processabilit.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | |
Cotronics Duralco™ 4461 Electrically Resistant, Low Viscosity Epoxy Adhesive, Coating, and Sealant |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | |
Abatron AboCast/AboCure 8109-3 Low viscosity, RT cure. Easy processing.Processing: 100/10 pbw; Potlife: 2.5 h/20°C (68°F), 30 min/40°C (105°F), 15 min/60°C (140°F); mix at RT; cures in: 24 h/20°C (68°F), 2-3 h/60°C (140.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | |
Abatron AboCast/AboCure 8109-8 All-purpose, structural dielectric resin. High thermal and chemical resistance and RT cure.Processing: 100/12 ratio; Potlife: 45 min/20°C (68°F), 20 min/40°C (105°F), 10 min /60°C (140°F); mi.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ATSM D638 |
Ashley Polymers Ashlene® 520BU Nylon 66 A general purpose Nylon 66 resin, black, utility grade.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ATSM D638 |
Ashley Polymers Ashlene® P1503 Polycarbonate A rigid flame retardant polycarbonate, UV stabilized for applications requiring superior dimensional stability and overall toughness. Also available as 1500 without UV stabilizer.Data provided by t.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Applied Composites 150 Polyester SMC Industry Application: TransportationProduct Application: Engine CoversDistinct Features: Grey Pigments Only, Low DensityInformation provided by Applied Composites Corporation. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Applied Composites 8079 Modified Vinylester SMC Industry Application: ElectricalProduct Application: Transmission ProductDistinct Features: Low Moisture and Absorption, Permeability, Paintable, Flexible Design Parameter, Thick Cross Sections, Hig.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | |
BCC Products BC 5008-2 General Purpose Epoxy System BC 5008-2 is a very low viscosity, modified, unfilled, room temperature curing, general purpose resin system. BC 5008-2 is a clear, amber, medium pot life material, with heat resistance to 175ºF. A.. |
|||
Tensile Strength, Ultimate | 65.5 MPa | 9500 psi | ASTM D638 |
Technetics Group Amicon™ Acetal Copolymer
(Unverified Data**) Information provided by Technetics Group (formerly Plastomer Technologies) |