Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 2 hours at 177°C |
Multibase SILASTIC® C7-4565 CADOX TS-50S Dow-Corning Biomedical Grade ETR Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 - 96.5 MPa | 1100 - 14000 psi | Average value: 48.2 MPa Grade Count:56 |
Overview of materials for Epoxy, Cast, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Epoxy, Cast, Unreinforced". Each property range of values reported is minimum and maximum values of appr.. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | molded-without post cure; ASTM D412 |
Multibase C6-235 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 2 hours at 177°C; ASTM D412 |
Multibase C6-235 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 4 hours at 177°C; ASTM D412 |
Multibase C6-235 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 2 hours at 177°C; ASTM D412 |
Multibase C6-235 PERKADOX PD-50S Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 8 hours at 177°C; ASTM D412 |
Multibase C6-235 PERKADOX PD-50S Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 2 hours at 177°C; ASTM D412 |
Multibase C6-235 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 4 hours at 177°C; ASTM D412 |
Multibase C6-235 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 8 hours at 177°C; ASTM D412 |
Multibase C6-235 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | molded-without post cure; ASTM D412 |
Multibase C6-250 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | molded-without post cure; ASTM D412 |
Multibase C6-265 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 2 hours at 177°C; ASTM D412 |
Multibase C6-265 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 4 hours at 177°C; ASTM D412 |
Multibase C6-265 DI-CUP R Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 8 hours at 177°C; ASTM D412 |
Multibase C6-265 PERKADOX PD-50S Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | molded-without post cure; ASTM D412 |
Multibase C6-265 PERKADOX PD-50S Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 2 hours at 177°C; ASTM D412 |
Multibase C6-265 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 4 hours at 177°C; ASTM D412 |
Multibase C6-265 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | post cured- 8 hours at 177°C; ASTM D412 |
Multibase C6-265 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 8960-60 Natural PVC Extrusion Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 8980-65 Natural PVC Extrusion Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 8999-70 Natural PVC Extrusion Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 9077-70 Natural PVC for Injection Molding Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 9960-60 Natural PVC Molding Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 9980-65 Natural PVC Molding Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Sylvin Technologies 9999-70 Natural PVC Molding Compound Information provided by Sylvin Technologies Inc. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Dow Corning C6-235 ELASTOMER One-part, enhanced tear-resistant silicone elastomers; uncatalyzed (customer selects peroxide catalyst) elastomer materials designed for compounding into elastomer for part fabrication and medical d.. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
Dow Corning SILASTIC® LS 5-8752 FLUOROSILICONE RUBBER 45 durometer, off-white, molding grade fluorosilicone base.Information provided by Dow Corning |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | ASTM D638 |
Colorite Polymers 6283MG General Purpose Vinyl Compound Description: Colorite produces many vinyl compounds. They have the compounds that perfectly suit whatever the application. Requirements such as ultraviolet ray resistance, fungus resistance, flame r.. |
|||
Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | silicone property; ASTM D412 |
Arlon R37908R015L Silicone Rubber/Fiberglass/Acrylic/Polyester Laminated film: aluminized PEN; Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2, layer 1: acrylic PSA; Side 2, layer 2: polyester substrate; Side 2, layer 3: acrylic PSA; Interleav.. |