- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Molded
- Sylvin Technologies 9077-70 Natural PVC for Injection Molding
Sylvin Technologies 9077-70 Natural PVC for Injection Molding
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Molded |
| Manufacturer | Sylvin Technologies |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sylvin Technologies 9077-70 Natural PVC for Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Sylvin Technologies Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.35 g/cc | 1.35 g/cc | |
| Thickness | 1000 microns | 39.4 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 70 | 70 | 10 seconds |
| Tensile Strength, Ultimate | 7.58 MPa | 1100 psi | |
| Elongation at Break | 310 % | 310 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 50.0 °C | 122 °F | RTI |
| Flammability, UL94 | HB | HB |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 160 - 171 °C | 320 - 340 °F |
Users viewing this material also viewed the following:
- Polimeri Europa Riblene® MQ 10 Low Density Polyethylene - Injection Molding
- Park Electrochemical Nelcote® F-502 Phenolic Prepreg, 581 Quartz Reinforced
- Multibase Multi-Flex® A 5001 E LC Black TPE Thermoplastic Elastomer
- SABIC Innovative Plastics PPO 646 PPO (Europe-Africa-Middle East)
- Shin-Etsu Silicones KEP-14 Silicone additive
- EMS-Griltech Griltex® D 1299A Heat Stabilized Copolyamide Hotmelt Adhesive (Apparel Interlinings)
- Dow DMDB-7950 NT 7 High Density Polyethylene Resin
- Axiall 10756 Wire & Cable Flexible PVC
- Alcoa KAMA 1500 Freezer Modified OPS (discontinued **)
Copyright © lookpolymers.com All Rights Reserved