Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
NCMT NanoPAC™ S216 High Performance Polypropylene Nanocomposite Characteristics: High stiffness Supplementary of ABS Good impact resistant Less shrinkage Good thermal conductivity Applications: Toys Industry AutomobileInformation provided by Nano Composite Mater.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Owens Corning Glass Fiber Reinforced Polyurethane, Milled Fibers (RRIM), 13 wt.% glass Polyurethane is normally used for its structural properties when molded. It is highly resistant to most organic solvents. It is not recommended for use with strong acids and alkalis, steam, fuels, a.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | |
Pyrotek F-24 Dense Machinable Board F-24 is a high temperature resin material that is reinforced with fiberglass. Abrasion resistant, it is used for hot glass handling applications.ApplicationsDonut rollers for glass Guide rails Wear.. |
|||
Tensile Strength, Ultimate | 19.0 MPa @Temperature 120 °C |
2760 psi @Temperature 248 °F |
ISO 527 |
LATI LATILUB 73/13-01M Polyoxymethylene Base (POM), 1% Molybdenum Disulfide Self Lubricating Plastic
(Unv Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Huntsman PE1651 EVA Film Extrusion
(discontinued **) 6.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Yields film with outstanding low temperature strength, excellent clarity, and good heat seal.Applications: Film extrusion: ice bags, liqui.. |
|||
Tensile Strength, Ultimate | 19.0 - 55.0 MPa | 2760 - 7980 psi | Average value: 47.8 MPa Grade Count:18 |
Overview of materials for ECTFE Fluoropolymer This property data is a summary of similar materials in the MatWeb database for the category "ECTFE Fluoropolymer". Each property range of values reported is minimum and maximum values of appropriat.. |
|||
Tensile Strength, Ultimate | 19.0 MPa @Thickness 2.00 mm |
2760 psi @Thickness 0.0787 in |
ASTM D4894 |
3M Dyneon™ TF 4105 PTFE 25% Glass Fiber Filled
(discontinued **) Type II PTFE. Applications include valve seats, bearings, seals/gaskets, moldings, piston rings.Data provided by Dyneon. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
LyondellBasell Astryn 65F4-3 Polypropylene Homopolymer, 30% Talc Key Features: conventional melt flow, very high modulus, mineral-filled polypropylene homopolymer, excellent heat resistance, high stiffness, excellent chemical resistance, good surface qualityAppli.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2750 psi | |
Williams Advanced Alloys WS327 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | Type IV, crosshead speed 2 in/min; ASTM D638 |
DuPont Elvax® 560 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2750 psi | ASTM-D1457 |
CoorsTek PolyGlyde™ 2000 Self-Lubricating Seal PolyGlyde seals offer low heat generation in high-friction and high-stress environments. These seals provide superior performance over traditional carbon materials: runs cooler – even in dry-runni.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2750 psi | ASTM D638 |
Ecomass® 1003TU96 Tungsten Filled COPA Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applications.High Specific GravityTungsten Powder Filled Co-Polyamide (COPA)Excellent ToughnessInformation provided by.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2750 psi | ASTM D638 |
Ecomass® 1003ZD95 Tungsten Filled COPA Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applications.High Specific GravityTungsten Powder Filled Co-Polyamide (COPA)Excellent ToughnessInformation provided by.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ISO 527-1/-2 |
DSM Arnitel® PB420-B TPC-ET Blow Molding Grade |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Devcon Underwater Repair Putty (UW) Epoxy Emergency Repair ProductsComments: High-performance technology for repairing, patching and rebuilding equipment in habitually wet environments, even under water. Eliminates the need for substrate t.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | |
Dow HDPE 04452N High Density Polyethylene DOW HDPE 04452N resin is a narrow molecular weight distribution copolymer designed to offer good stress crack resistance and stacking strength with excellent impact strength. This resin has moderate.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | Die C (35 min / 145°C); ASTM D412 |
Dow SE SLR-4601 Solution polymerized Styrene Butadiene Rubber (S-SBR) SE SLR-4601 is manufactured by anionic solution polymerization using lithium initiator. It is a product with medium styrene and high vinyl content. The product is partially Sn-coupled and chemical.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | Die C (35 min / 145°C); ASTM D412 |
Dow SE SLR-4610 Solution polymerized Styrene Butadiene Rubber (S-SBR) SE SLR-4610 is manufactured by anionic solution polymerization using lithium initiator and is extended with 37.5 parts of aromatic oil in relation to solid rubber. It is a product with medium styre.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D412 |
Colorite Polymers Weatherflex™ CS1525WX (NTL01B) Wire and Cable Vinyl Compound Description: Colorite specialty wire and cable compounds feature low smoke properties, excellent flame retardance, low temperature flexibility, and resistance to abrasion and chemicals. All are avai.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2750 psi | ASTM D638 |
Colorite Polymers 8083 General Purpose Vinyl Compound Description: Colorite produces many vinyl compounds. They have the compounds that perfectly suit whatever the application. Requirements such as ultraviolet ray resistance, fungus resistance, flame r.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2750 psi | |
3M Jet-Weld™ TE-040 Adhesive A warm applied, moisture-curing polyurethane adhesive for wood working, laminating and plastic component assembly.Extrudable. Fast set time, low viscosity, and strong, flexible bonds for a wide vari.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
A. Schulman ComAlloy Comtuf® 102 Polypropylene, Mineral Reinforced, Impact Modified Data provided by the manufacturer, ComAlloy International Company.20% Mineral Reinforced. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has been i.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® 25CAR PTFE; Petroleum Coke and Graphite
(discontinued **) Data provided by the manufacturer.25 wt.% Petroleum Coke and Graphite. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric p.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
Huntsman PE1451 EVA Film Extrusion
(discontinued **) 4.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | |
3M Dyneon™ Aflas® FA-100H PTFE Fluoroelastomer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 57%F in polymer with 19% Medium Thermal Carbon Black (N990), 4% Triallyl Isocyanurate (TAIC), 1% Percadox™ 14, 1% Sodium.. |
|||
Tensile Strength, Ultimate | 19.0 MPa | 2760 psi | ASTM D638 |
LyondellBasell Astryn 7523C Polypropylene Copolymer Key Features: conventional melt flow, medium modulus polypropylene copolymer, excellent impact and stiffness balance, excellent chemical resistance, versatile, good processabilityApplications: autom.. |
|||
Tensile Strength, Ultimate | 19.0 - 281 MPa | 2760 - 40800 psi | Average value: 106 MPa Grade Count:13 |
Overview of materials for Polyimide, Thermoset Film This property data is a summary of similar materials in the MatWeb database for the category "Polyimide, Thermoset Film". Each property range of values reported is minimum and maximum values of appr.. |