Polymer Property : Tensile Strength, Yield = 10.3 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	10.3 MPa	1490 psi	ASTM D412
Precision Polymer Engineering H70B Epichlorohydrin Peroxide Cured, Epichlorohydrin Rubber, 65-75 °IRHD. Terpolymer of epichlorohydrin, ethylene oxide and an unsaturated monomer. ASTM and ISO designation = GECO.Applications: Excellent resistance t..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
Quadrant EPP Proteus® LDPE - Low Density Polyethylene (ASTM Product Data Sheet)
Tensile Strength, Yield	10.3 - 27.6 MPa	1500 - 4000 psi	ASTM D638
Alcoa KAMA 2500 Prime Clear OPS, Shrink Film (discontinued **) CapabilitiesGauge: .001” to .004” (28 to 101µm)Width: .2” to 80” (50.8 to 2032mm)Core size: 3” and 6” standard cores, 8” availableRoll O.D.: various confiations availableCustom colors and ti..
Tensile Strength, Yield	10.3 - 27.6 MPa	1500 - 4000 psi	ASTM D638
Alcoa KAMA 3400 Super High Impact Polystyrene (discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableMono-layer an..
Tensile Strength, Yield	>= 10.3 MPa	>= 1500 psi	ASTM D638
Alcoa KAMA AgriHIPS 3500 AgriHIPS (discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableSilicone coat..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
Entec Hypel® PELD12/.920 LDPE (discontinued **) Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente..
Tensile Strength, Yield	10.3 MPa	1500 psi	at 2% Offset; ASTM D638
ExxonMobil LD 503.LN Foams and Compounding Resin (discontinued **) LD 503.LN is a low density homopolymer specially designed for maximum performance in foam applications.Information provided by ExxonMobil Chemical
Tensile Strength, Yield	10.3 MPa	1490 psi	ASTM D638
LG Chemical LUTENE MB9500 LDPE Injection Molding Grade Description: The physical and structural characteristics of LUTENE MB9500 give it excellent flow properties and good productivity, clarity and surface gloss.Main Application: Powder coating, artific..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D412
Teknor Apex APEXÂ® 3201-60 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling..
Tensile Strength, Yield	10.3 MPa	1500 psi	100%; ASTM D412
Teknor Apex APEXÂ® 3210-85 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, Radiation Uses-Automotive Applications, Connectors, Non-specific Food Applications, Ge..
Tensile Strength, Yield	10.3 MPa	1490 psi	ASTM D412
Teknor Apex TELCAR® 1000-92 Thermoplastic Elastomer Information provided by Teknor Apex Company
Tensile Strength, Yield	10.3 MPa	1490 psi	ASTM D412
Teknor Apex TELCAR® 1000-92UV Thermoplastic Elastomer Information provided by Teknor Apex Company
Tensile Strength, Yield	10.3 MPa	1490 psi	2.0 in/min; ASTM D638
Teknor Apex Telcar® TL-1000-92-UV Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Automotive Spec..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman CP851 High Flow, Injection Molding Grade DescriptionCP 851 is a high flow injection molding grade of conventional (high pressure) low density polyethylene. ApplicationCP 851 meets the specifications in FDA Regulation 21 CFR177.1520 (c)3.1..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound DescriptionLP 522-01 is an injection molding and/or extrusion grade compoundApplicationLP 552-01 meets FDA Regulation CFT 177.1520(c)3.1.Information provided by A. Schulman.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound DescriptionLP 522-01 is an injection molding and/or extrusion grade compoundApplicationLP 552-01 meets FDA Regulation CFT 177.1520(c)3.1.Information provided by A. Schulman.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman CP851 High Flow, Injection Molding Grade DescriptionCP 851 is a high flow injection molding grade of conventional (high pressure) low density polyethylene. ApplicationCP 851 meets the specifications in FDA Regulation 21 CFR177.1520 (c)3.1..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound DescriptionLP 522-01 is an injection molding and/or extrusion grade compoundApplicationLP 552-01 meets FDA Regulation CFT 177.1520(c)3.1.Information provided by A. Schulman.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound DescriptionLP 522-01 is an injection molding and/or extrusion grade compoundApplicationLP 552-01 meets FDA Regulation CFT 177.1520(c)3.1.Information provided by A. Schulman.
Tensile Strength, Yield	10.3 MPa	1500 psi	at 100%; ASTM D412
Lubrizol Estane® ALR PC60D Thermoplastic Polyurethane Type: Estane® ALR PC60D is a polycarbonate diol based thermoplastic polyurethane (TPU).Features: Hydrolytically stable, very durableInformation Provided by The Lubrizol Corporation
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman CP851 High Flow, Injection Molding Grade DescriptionCP 851 is a high flow injection molding grade of conventional (high pressure) low density polyethylene. ApplicationCP 851 meets the specifications in FDA Regulation 21 CFR177.1520 (c)3.1..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound DescriptionLP 522-01 is an injection molding and/or extrusion grade compoundApplicationLP 552-01 meets FDA Regulation CFT 177.1520(c)3.1.Information provided by A. Schulman.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
ExxonMobil LLDPE LL 6101XR Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 6101 series are medium flow LLDPE grades, which offer excellent stiffness, heat distortion resistance and good environmental stress crack resistance. The excellent toughness ..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
ExxonMobil LLDPE LL 6201RQ Molding Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 6201 series are high flow LLDPE grades, which offer unique combination of excellent processability and outstanding product properties. Parts manufactured from LL 6201 Have go..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D638
ExxonMobil LLDPE LL 6201XR Molding Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 6201 series are high flow LLDPE grades, which offer unique combination of excellent processability and outstanding product properties. Parts manufactured from LL 6201 Have go..
Tensile Strength, Yield	10.3 MPa	1500 psi	Compression molded; ASTM D638
Dow 620I Linear Low Density Polyethylene (LDPE) For extruded foam applications Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 Information provided by Dow
Tensile Strength, Yield	10.3 MPa	1490 psi	Molded property
Dow DOWLEX™ 2047A Linear Low Density Polyethylene, Cast Film Grade DOWLEX® 2047A Polyethylene resin is a cast film polymer for high performance stretch cling applications. It provides outstanding tear strength, impact strength and toughness. It complies with U.S. ..
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D-638
Axiall 7800 Moldings & Extrusions Flexible PVC General purpose, 60°C rated molding compound.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	10.3 MPa	1500 psi	ASTM D-638
Axiall 8690 Moldings & Extrusions Flexible PVC General purpose extrusion compound designed for use in weatherstrips, screen spline and flexible gaskets.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	10.3 MPa	1500 psi	TM R050-36
Resinlab® EP1046FG Clear Electronic Grade Epoxy Encapsulant Resinlab™ EP1046FG Clear is a two part unfilled very fast curing electronic grade epoxy encapsulant designed for small castings (less than 25 grams). It cures very quickly with low exotherm to a to..