- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Mikro-Technik Reproflon PTFE
Mikro-Technik Reproflon PTFE
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE |
| Manufacturer | Mikro-Technik |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Mikro-Technik Reproflon PTFE.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Reproflon is reclaimed PTFE scraps. The powder can be reused for the usual manufacturing procedures.Information provided by Mikro-Technik GmbH
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.16 - 2.20 g/cc | 0.0780 - 0.0795 lb/in³ | ASTM D792-50 |
| Crystallinity | 60 - 85 % | 60 - 85 % | X-ray |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 55 - 59 | 55 - 59 | DIN 53 505 |
| Ball Indentation Hardness | 30.5 MPa | 4420 psi | DIN 53 456 |
| Tensile Strength, Yield | 10.3 - 22.5 MPa | 1490 - 3260 psi | ISO/R 527E |
| Elongation at Break | 75 - 150 % | 75 - 150 % | ISO/R 527 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 250 °C | 482 °F | |
| Minimum Service Temperature, Air | -200 °C | -328 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | DIN 53 482 |
| Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | DIN 53 482 |
| Dielectric Constant | 2.1 @Frequency 50 Hz |
2.1 @Frequency 50 Hz |
DIN 53 483 |
| 2.1 @Frequency 1000 Hz |
2.1 @Frequency 1000 Hz |
DIN 53 483 | |
| 2.1 @Frequency 1e+6 Hz |
2.1 @Frequency 1e+6 Hz |
DIN 53 483 | |
| Dielectric Strength | 20.0 - 40.0 kV/mm | 508 - 1020 kV/in | ASTM D149/15 |
| Dissipation Factor | 0.0010 @Frequency 50 Hz |
0.0010 @Frequency 50 Hz |
tan delta; DIN 53 483 |
| 0.0010 @Frequency 1e+6 Hz |
0.0010 @Frequency 1e+6 Hz |
tan delta; DIN 53 483 | |
| 0.0010 @Frequency 1000 Hz |
0.0010 @Frequency 1000 Hz |
DIN 53 483 |
Users viewing this material also viewed the following:
- Polymer Industries Densetec HDPE Marine Board
- LG Chemical MI-750 MIPS
- SABIC Innovative Plastics LNP Thermocomp RX06027 PA 66 (Europe-Africa-Middle East)
- SABIC Innovative Plastics NORYL GTX GTX810 PPE+PS+PA
- Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber
- Arlon 55279R055 0.055" (1.40 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- Pyrotek M-8 Fiberseal Blanket
Copyright © lookpolymers.com All Rights Reserved