Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering E75K Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Terpolymer (EPT), 66-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Specially formulated for sealing sulphur hexafluoride (SF6) gas in electric.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering N80X Nitrile Rubber Self-lubricating, Nitrile Rubber, 75-85 °IRHD. Copolymer of acrylonitrile and butadiene. Special filler incorporated to enhance operation in dynamic sealing applications. ASTM & ISO designation = N.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q70B Polyurethane Rubber Peroxide cured, Polyurethane Rubber, 65-75 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG714, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasion resis.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q80Y Polyurethane Rubber Peroxide cured, yellow Polyurethane Rubber, 75-85 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG814, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasio.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering R60D Natural Rubber Natural Rubber, 55-65 °IRHD. Formulated to Defence Standard 93-30, Type QX, Grade 60 (NRQX60).Applications: Natural rubber offers low compression set, high tensile strength, high resilience and ex.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering V90M Fluoroelastomer Compound Brown Fluoroelastomer Rubber, 85-95 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out: M3HK914, A1-10, B38, EF31, EO78, Z1, Z2, where Z1 = Brown and.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D368 |
Reliance Industries Reclair R35042 Reclair R35042 is a medium density polyethylene grade designed for the rotomoulding process. It exhibits good toughness and environmental stress resistance.Information provided by Reliance Industri.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 9022 MDPE - Overwrap Packaging The Trithene TS 9022 resin is a medium-density polyethylene (MDPE) with good optical properties, excellent stiffness and processability, that warrants the production of thin films with good appearan.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Konduit MT00EL PP LNP* Konduit* MT00EL is a Polypropylene base resin with thermal fillers. Characteristics of this grade are Thermal Conductivity and it is Low Extraactible.This data was supplied by SABIC-IP for th.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Perlast® G71H Perfluoroelastomer Special, white compound, with PTFE blended for improved dynamic performance. Has excellent chemical resistance, steam resistance and mechanical properties. Extremely low outgassing properties. Appl.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ASTM D638 |
NOVA Chemicals Sclair® 2315 LLDPE Injection Molding Resin
(discontinued **) Features: Low odor, low warpage, fast cycling, high surface gloss, permits light weight lid design, low temperature impact excellent.Data provided by the manufacturer. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa | 2030 - 5080 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 32008 PVDF Copolymer
(Unverified Data**) Key features of this grade: High Flexibility/ High Elongation/Cold Impact Resistance, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General .. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 0.200 %, Temperature 1150 °C |
2030 psi @Strain 0.200 %, Temperature 2100 °F |
|
Haynes 214® alloy, hot rolled solution annealed plate 12.7 mm (1/2 in.) thick Intended principally for use at temperatures of 955°C and above, exhibits resistance to oxidation that exceeds virtually all conventional heat-resistant wrought alloys. Applications include mesh .. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 0.200 %, Temperature 1204 °C |
2030 psi @Strain 0.200 %, Temperature 2199 °F |
|
Haynes HR-160® alloy, solution annealed sheet Outstanding resistance to various forms of high-temperature corrosion attack, excellent resistance to sulfidation and chloride attack in both reducing and oxidizing atmospheres. Excellent forming an.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
LG Chemical LUPOL TE-5005H Thermoplastic Elastomer Alloy, Dimensional Stability LUPOL resins, based on polyolefin with a wide range of characteristics, are a family of low cost engineering plastics.Applications: Automotive exterior parts.Information Provided by LG Chem |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP YP003 POLYESTER ELASTOMER LNP LUBRICOMP* YP003 is a compound based on Polyester Elastomer resin containing 15% PTFE/Silicone. Added features of this material include: Wear Resistant. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa @Thickness 2.00 mm |
2030 - 5080 psi @Thickness 0.0787 in |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Features: Copolymer; Good Flexibility; Low ViscosityUses: Wire & Cable ApplicationsAdditional .. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP) LNP* THERMOCOMP* 2X00858 is a compound based on FEP resin containing proprietary fillers. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Thermocomp MH0255A PP (Europe-Africa-Middle East) LNP* THERMOCOMP* MH0255A is a compound based on Polypropylene resin containing Proprietary Filler(s). Added features include; High Specific Gravity.This data was supplied by SABIC-IP for the Europe-.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ISO 527-2 |
Borealis Bormed™ LE6609-PH LDPE for Pharmaceutical Blow Molding Bormed LE6609-PH is a LD-polyethylene produced in a high-pressure process intended for blow molding of soft and flexible packages for pharmaceutical products.Bormed LE6609-PH can be used in "blow-fi.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | |
Trelleborg R683 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Eastman Neostar FN005 Elastomer Neostar FN005 elastomer is a tough, clear, durable copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where tough.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Eastman Neostar FN006 Elastomer Neostar FN006 elastomer is the second in Eastman’s series of tough, clear, durable copolyester ethers. Developed for use in the profile and automotive markets, it can also be used in packaging and .. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 100 % |
2030 psi @Strain 100 % |
ISO 527-1/-2 |
Covestro Desmopan® DP 3354D Polyurethane As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 300 % |
2030 psi @Strain 300 % |
ISO 527-1/-2 |
Covestro Desmopan® DP 8785A S043 Polyurethane injection molding gradewith special UV stabilizersexcellent abrasion resistanceEasy releaseshort cycle timesApplicationSports shoe solesPreprocessingMax. Water content |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO 527 |
Breplast Bretene PP Polypropylene Composite Recovered polypropylene compositeInformation provided by Breplast S.p.A. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | |
BASF Novolen® 2900 H Polypropylene Injection molded and thermoformed parts.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D-638 |
Axiall 801-83 Moldings & Extrusions Flexible PVC High temperature automotive harness tape.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |