Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
S&E Specialty Polymers TufGuard E™ GTPO8102ROHS Olefin-based, Flame Retardant Application: The GTPO8102ROHS compound is an FR, UV, olefin-based insulation and jacketing compound for appliance, flat ribbon and heat trace wire applications. It is formulated to meet CSA test C22.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ISO 527 |
Polimeri Europa Riblene® GM 30 Low Density Polyethylene - Coating Grade Riblene GM 30 is a medium fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GM 30 is suitable for coating applications where low neck-in and high manufacturing speed are req.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ISO 527 |
Polimeri Europa Riblene® MM 20 Low Density Polyethylene - Injection Molding Riblene MM 20 is a medium fluidity low density polyethylene resin (LDPE).Parts made by Riblene MM 20 are characterized by a high flexibility.Main Applications: Riblene MM 20 is suitable for injecti.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 7001 LDPE - Heavy Duty Low Friction Film The Trithene TS 7001 resin is a low-density polyethylene (LDPE) with high molecular weight, designed to satisfy those applications that require high mechanical strength and low coefficient of fricti.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TX 7001 LDPE - High Molecular Weight The Trithene TX 7001 resin is a low-density polyethylene (LDPE) with high molecular weight, designed to satisfy those applications that require high mechanical strength and environmental stress crac.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | at 100%; ASTM D412 |
2095A Polyurethane-based Biomedical Elastomer |
|||
Tensile Strength, Yield | 11.0 MPa @Strain 100 % |
1600 psi @Strain 100 % |
across flow; ASTM D412 |
ExxonMobil Santoprene® 8203-45 Thermoplastic Rubber
(discontinued **) Description: A colorable thermoplastic general purpose non-hygroscopic elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfo.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 500 mm/min (20 in./min.); Type IV Specimen; ASTM D638 |
Eastman 18DOA Polyethylene
(discontinued **) Polyethylene 18DOA is a low density formulation suggested for the production of closures where a high melt index material is needed to meet shrinkage requirements and fast molding cycles. It molds .. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TU 3001 LDPE - Agricultural Film The Trithene TU 3001 resin is a low-density polyethylene (LDPE) with high molecular weight, designed to satisfy those applications that require high mechanical properties, good processability and bu.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TU 8091 LDPE - Agricultural Film Trithene TU 8091 is a low-density polyethylene (LDPE) with high molecular weight, with excellent mechanical properties and good processability. These qualities ensure the production of very wide fil.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TX 7003 LDPE - Heavy Duty and Industrial Film The Trithene® TX 7003 resin is a low-density, high molecular-weight polyethylene that offers high mechanical strength and environmental stress cracking resistance (ESCR). Additionally, this product.. |
|||
Tensile Strength, Yield | 11.0 MPa @Strain 0.200 %, Temperature 1204 °C |
1600 psi @Strain 0.200 %, Temperature 2199 °F |
|
Haynes HR-160® alloy, hot rolled and solution annealed plate Outstanding resistance to various forms of high-temperature corrosion attack, excellent resistance to sulfidation and chloride attack in both reducing and oxidizing atmospheres. Excellent forming an.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | Elastic; ASTM D638 |
Multibase Multi-Flex® A 8502 LC TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Thermal Stability, GoodOzone Resistant Forms:PelletsProcessing Method:Injection MoldingExtrusion Uses: Automotive Interior PartsInformation provided by Multiba.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | Elastic; ASTM D412 |
Multibase Multi-Flex® A 8502 LC UV RXF/YYWA Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3211-85 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D412 |
Teknor Apex APEX® 90-A472R-65-NT Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Medical Applications, Caps, Closures, Valves/Valve Parts Appearance-ClearForms-PelletsProcessing Method-.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D412 |
Teknor Apex Flexalloy® 3501-50-NT Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MW, Ethylene Oxide SterilizableForms-PelletsProcessing-Extrusion, Injection MoldingAppe.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | TD; ISO 527-3 |
Borealis FG5199 Linear Low Density Polyethylene FG5199 is a Butene Linear Low Density Polyethylene for Film Extrusion. Includes antioxidant, anti-Fog and cling additives. The grade is developed for blown cling film. Film made from FG5199 is suit.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 2"/min; ASTM D638 |
A. Schulman CP814-01 Linear, Low-Density Polyethylene DescriptionCP 814-01 is a linear low-density polyethylene resin with excellent molding characteristics and good low temperature impact. ApplicationCP814-01 meets the specifications contained in FDA .. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | 2"/min; ASTM D638 |
A. Schulman CP814-01 Linear, Low-Density Polyethylene DescriptionCP 814-01 is a linear low-density polyethylene resin with excellent molding characteristics and good low temperature impact. ApplicationCP814-01 meets the specifications contained in FDA .. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | machine direction; ASTM D882 |
A. Schulman CP878-01 Natural Linear, Low-Density Polyethylene DescriptionCP 878-01 Natural is a linear low-density polyethylene having good tensile, stiffness, and toughness properties. ApplicationCP 878-01 meets FDA Regulation 21 CFR 177.1520(c)3.1 and 3.2.In.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Trelleborg Horda Cable E8413 Easy Strippable Semiconductive Shielding E8413 is a vulcanizable, strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes.E8413 meets the requirements as be.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
ExxonMobil LDPE LD 617.LN Low Density Polyethylene Resin Product Description: LD 617.LN is a high flow, low density polyethylene homopolymer resin designed to provide excellent processability, flexibility and surface appearance. This multipurpose resin is.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | Molded and tested in accordance with ASTM D4976; ASTM D638 |
Dow DNDA-1081 NT 7 Linear Low Density Polyethylene Resin DOW DNDA-1081 NT 7 is produced using UNIPOL™ PE process technology. It is intended for high-speed injection molding of thin walled parts such as downguaged lids. Information provided by Dow |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D-638 |
Axiall 8640 Moldings & Extrusions Flexible PVC General purpose extrusion compound for weatherstrips and tubings.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D-638 |
Axiall 8700 Moldings & Extrusions Flexible PVC General purpose, matte-finish extrusion compound.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D-638 |
Axiall 8651 Moldings & Extrusions Flexible PVC A quality, low gravity extrusion compound with excellent low temperature properties. Designed for use in weatherstrips, flexible gaskets and extruded shapes.Information provided by Georgia GulfGeor.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Huntsman PE2060 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics, good processability.Applications: Injection molding: general purpose molding, large moldings including housewares and toys.FDA Note.. |
|||
Tensile Strength, Yield | 11.0 - 22.0 MPa | 1600 - 3190 psi | Average value: 18.1 MPa Grade Count:66 |
Overview of materials for Linear Medium Density Polyethylene (LMDPE), Rotational Molded This property data is a summary of similar materials in the MatWeb database for the category "Linear Medium Density Polyethylene (LMDPE), Rotational Molded". Each property range of values reported i.. |
|||
Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
Huntsman PE8020 Specialty Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with excellent draw down and machinability.Applications: Film extrusion: gel free film applications.FDA Notes: Conforms to FDA regulation 21 CFR 1.. |