Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 30.0 MPa | 4350 psi | IV 2 in/min; ASTM D638 |
Solvay Engineered Polymers INDURE™ E1500 HG TPO
(discontinued **) Description: INDURE™ E1500 HG is a thermoplastic olefinic elastomer (TPO) designed for high-gloss thermoformed applications where excellent gloss retention after forming is required. This material.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ISO 527 |
Total Finathene® SR 572 HDPE blow molding
(discontinued **) FINATHENE® SR 572 is a high density polyethylene produced by the slurry loop low pressure polymerization process. FINATHENE® SR 572 has been developed for the manufacturing of blow molded bottles .. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min test speed; ASTM D 638 |
NOVA Chemicals Sclair® 2906 HDPE Injection Molding Resin NOVA Chemicals' polyethylene resins are chemically and biologically inert.Features: Excellent toughness and impact resistance, High stiffness, Excellent processing stability, High GlossAdditives: .. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Halar® 500LC Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) Low ViscosityUses: Wire & Cable ApplicationsAdditional Properties: Crystallization Heat - ASTM D3418 40.0 J/g; Heat of Fusion - ASTM D3418 42.0 J/g; Thermal Stability - TGA 405 °CInformation prov.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
A. Schulman POLYFORT™ PP 2268UX Heat Resistant Polypropylene DescriptionPolyfort® PP 2268UX is a UV stabilized, extra high flow unique high modulus, heat resistant polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 2" (50mm) per min; ASTM D638 |
Formosa Plastics Formolene® 2306N Impact Copolymer Polypropylene Impact Copolymer for Compression and Injection Molded Caps and Closures Formolene® 2306N is a polypropylene copolymer formulated for compression and injection molded cap applications. It was create.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Total PPH 3576 BB Polypropylene Homopolymer, Cast Film Polypropylene 3576 BB is recommended for use in non-oriented cast films processes. It contains an optimized level of slip and anti-block additives.3576 BB is intended for food, magazine or textile .. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ISO 527-2 |
Total PPH 7089 Polypropylene Homopolymer, Fiber Polypropylene PPH 7089 is a narrow molecular weight distribution homopolymer polypropylene, with anti-gas fading stabilization.Polypropylene PPH 7089 is intended for the extrusion of fibers with the.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Total PPR 6827MZ Polypropylene, Random Copolymer - High Flow Clarified - for Injection Molding Clarity. TOTAL Polypropylene 6827MZ exhibits superior clarity and produces molded parts with improved impact compared with parts molded from homopolymer polypropylene.Antistat. 6827MZ contains an a.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
A. Schulman POLYFLAM™ RPP 1058 General Purpose Homopolymer Polypropylene (30% Fiberglass) DescriptionPolyflam® RPP 1058 is a general purpose homopolymer polypropylene flame retardant with a UL-V2 flammability rating and 105°C temperature index at 0.030 in.Information provided by A. Sch.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
A. Schulman POLYFORT™ FXP 2600-3120 CaC02 Filled Homopolymer Polypropylene DescriptionPolyfort® FXP 2600-3120 is a 20% GAC02 filled homopolymer polypropylene compound.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 2.0 PHR MBTS MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
UBE UMERIT 613A Metallocene LLDPE Description: UBE Super Polyethylene Umerit® is an ethylene-olefin copolymer made by UBE using the metallocene catalytic method. The metallocene catalytic method results in superior physical propert.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® AZ 3 PA66 Product description: Grilon AZ 3 is a normal viscosity, high impact modified PA66 injection molding grade. Grilon AZ 3 has the following important properties: Excellent toughness at low temperatures.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Entec Hypro™ PPH-CC10 Natural Homopolymer Polypropylene, 10% Calcium Carbonate Filled Information provided by Entec |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min |
Arkema Group Rilsan® AMN P30 LD Nylon 12, Flexible, Injection Grade (Dry) Designation ISO 1874-PA12-P,MLR,12-004Flexible grade for injection molding. Available color: black. Light stabilized. Mold-release agent.Good impact strength. Flexibility and dynamic properties. Eas.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0334T40L Talc Reinforced |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336C30L Calcium Reinforced |
|||
Tensile Strength, Yield | 30.0 MPa @Temperature 120 °C |
4350 psi @Temperature 248 °F |
ISO Data |
BASF Ultramid® 8202C PA6 (Dry) Ultramid 8202C is a modified crystalline and low viscosity, nylon 6 injection molding homopolymer. It is also available in heat stabilized (Ultamid 8202C HS) and/or pigmented versions. Its unique .. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0339T40L Talc Reinforced |
|||
Tensile Strength, Yield | 30.0 - 35.0 MPa | 4350 - 5080 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 11008 PVDF Copolymer
(discontinued **) Key features of this grade: Low Viscosity, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General information about SOLEF® PVDF: SOLEF® PVD.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM value at 50 mm/min. |
BASF Capron® 8253 Impact Modified Nylon 6 (Conditioned)
(discontinued **) Capron 8253 is an unfilled type 6 graft copolymer developed for both injection molding and extrusion applications. It is also available in heat stabilized (Capron 8253 HS) and/or pigmented versions.. |
|||
Tensile Strength, Yield | 30.0 MPa @Temperature 23.0 °C |
4350 psi @Temperature 73.4 °F |
50mm/min; ISO 527-2/1A/50 |
SYNTHOS Krasten® 552M High Impact Polystyrene High impact grade with a wide range of Applications. Processed mainly by injection moulding. Production of consumer goods and technical parts subjected to increased mechanical stress. Good results i.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 1068-32 Black40% Mineral Filled Polypropylene DescriptionPolyfort® FPP 1068-32 Black is a 40% mineral filled polypropylene designed for use when improved heat resistance, dimensional stability and high stiffness is needed. ApplicationApplicati.. |