Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® PE 1296 Conductive Thermoplastic Compound PRE-ELEC® PE 1296 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1296 has a high concentration o.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO R527 |
Solvay Engineered Polymers SEQUEL® 2380 Engineered Polyolefin
(discontinued **) Description: SEQUEL® 2380 engineered polyolefin is designed for large mold-in-color automotive interior applications that require stiffness and dimensional stability over a broad temperature range... |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 50 mm/min; ASTM D638 |
LyondellBasell Alathon® M4855 High Density Polyethylene, Injection Molding Grade ALATHON M4855 is a high density copolymer for use in injection molding applications. It exhibits excellent impact, warp and environmental stress crack resistance. Typical applications for M4855X01 a.. |
|||
Tensile Strength, Yield | >= 24.0 MPa | >= 3480 psi | 50 mm/min; ISO 527 |
MTM Plastics Purpolen® PP Polypropylene Regrind Purpolen® is a sorted regrind material suited to the production of demanding end user products. Extrusion and injection molding grades are available in many colors. The basis of our Purpolen® .. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ASTM D638 |
LyondellBasell Astryn BC78A Polypropylene Copolymer, 23% Talc Key Features: high melt flow, high modulus, mineral-filled polypropylene copolymer, high rigidity, good colorability, good processabilityApplications: automotive interior trim components, pillar mol.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO-DIS 527 |
Schwartz Technical Plastics LAMIGAMID® 710 High Density Polyethylene Application: chain-guides, cutting plates, linersInformation provided by Schwartz Technical Plastics GmbH |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP YL003 Polyester Elastomer (Europe-Africa-Middle East) LNP* LUBRICOMP* YL003 is a compound based on Polyester Elastomer containing PTFE. Added features include; Internally Lubricated. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 50mm/min; ISO 527-2 |
Borealis BorSafe™ HE3494-LS-H HDPE Compound for Pressure Pipes BorSafe™ HE3494-LS-H is a bimodal polyethylene compound produced by the advanced Borstar® technology. It includes a combination of pigments and stabilizers to ensure excellent long-term thermal s.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527 |
Unipetrol PE HD LITEN® MB/ML 77 HDPE Made for injection molding applications.Information provided by Unipetrol RPA |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 2 in/min; ASTM D638 |
A. Schulman PP 3457-01 Copolymer Polypropylene DescriptionPolypropylene PP 3457-01 is a copolymer polypropylene combining high impact at cold temperatures while maintaining stiffness. Ideal for durables in such applications for the furniture, a.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 1245 CaCO3 Filled Copolymer Polypropylene DescriptionPolyfort® FPP 1245 is a 20% CAC03 filled copolymer polypropylene product. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ASTM D638 |
A. Schulman POLYFORT™ PP 2175HU-31 High Flow Copolymer Polypropylene DescriptionPolyfort® PP 2175HU-31 is a high flow copolymer polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 24.0 - 27.0 MPa | 3480 - 3920 psi | ASTM D638 |
A. Schulman POLYFLAM™ CFP 4623 20% Calcium Filled Polypropylene DescriptionPolyfort® 4623 is a 20% calcium filled polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527-2 |
Total PPC 3666 Polypropylene, Heterophasic Copolymer, Extrusion Polypropylene PPC 3666 is a heterophasic copolymer with a Melt Flow index of 1.5 g/10 min. This resin offers an outstanding processability in combination with good melt strength and excellent mecha.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527-2 |
Total PPC 9612 Polypropylene, Heterophasic Copolymer, Injection Molding This product is a Total Ecosolutions grade.Polypropylene PPC 9612 has been developed specifically for the injection molding of crates and is characterized by a high Melt Flow index of 20 g/10 min. .. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | at 50 mm/min; ASTM D638 |
A. Schulman POLYFORT™ PP 3726 Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 24.0 - 27.0 MPa | 3480 - 3920 psi | ASTM D638 |
A. Schulman POLYFLAM™ CFP 4623 20% Calcium Filled Polypropylene DescriptionPolyfort® 4623 is a 20% calcium filled polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527-2 |
Total PS CPDS 820 Flame Retardant Polystyrene POLYSTYRENE (PS) COMPOUND (CPDS) 820 is a high impact brominated flame retardant polystyrene. A combination of high flow and high heat stability gives excellent processability and reduced cycle tim.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 2 in/min, Type IV bar; ASTM D638 |
Chevron Phillips Marlex® 9503H HDPE Blow Molding Resin Resin Type: Hexene CopolymerCharacteristics: Outstanding ESCRExcellent impact resistanceApplications: Detergent bottlesIndustrial containers/large partsHousehold and industrial chemical containersIn.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 2 in/min, Type IV bar; ASTM D638 |
Chevron Phillips Marlex® C513UV High Density Polyethylene, Blow Molding This extra high molecular weight, hexane copolymer is tailored for intermediate bulk container applications that require:Outstanding impact resistanceOutstanding ESCRExcellent processabilityUV stabi.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527-2/50 |
ExxonMobil Exxtral™ CNU 013 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin with good UV resistance designed for automotive exterior applications. Availability: Africa & Middle East, Asia Pacific, Europe, South.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 2 in/min; LAB032 |
ExxonMobil Mytex™ AS65KW-1ATM Talc filled compounded polypropylene produced for automotive interior applicationsInformation provided by ExxonMobil Chemical |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ASTM D638 |
Arkema Group Pebax® 7033 Polyether Block Amide (PEBA) Information provided by Arkema Group |
|||
Tensile Strength, Yield | >= 24.0 MPa | >= 3480 psi | ASTM D638 |
Buckeye Polymers BP RPP 4012 T BLK Polypropylene, Talc Filled Product Information: Our Talc filled product lines exhibit excellent properties such as high stiffness, surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and .. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO R 527-2 |
Arkema Group OREVAC® 18760 Grafted Maleic Anhydride Polypropylene OREVAC 18760 is a maleic anhydride grafted polypropylene used in the manufacturing of three layer PP coating for steel pipeline. OREVAC 18760 is also used in multilayer EVOH – PP structures. OREVAC.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO R 527 |
Addiplast Addilene J 430 N30 Polypropylene Copolymer Good surface appearanceInformation provided by Addiplast. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 50 mm/min |
Arkema Group Kynar® FLEX 2821 PVDF
(discontinued **) Designation ISO 12086-VDF/HFP-K, EDN, N. ?E5.C.H.B.C,, ? (2.5-6.5)Kynar FLEX PVDF are fluorinated thermoplastic copolymers.Outstanding characteristics of Kynar FLEX: chemical resistance, imperviousn.. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | 50 mm/min |
Arkema Group Kynar® FLEX 2822 PVDF
(discontinued **) Designation ISO 12086-VDF/HFP-K, EDN, N. ?E5.C.H.B.C,, ? (4-8)Kynar FLEX PVDF are fluorinated thermoplastic copolymers.Outstanding characteristics of Kynar FLEX: chemical resistance, imperviousness .. |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | |
Trelleborg R397 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tensile Strength, Yield | 24.0 MPa | 3480 psi | ISO 527 |
Total Finathene® SI 508 HDPE blow molding
(discontinued **) Finathene® SI 508 is part of a new generation of high density ethylene-hexene copolymers produced by the slurry loop low pressure polymerization process. Finathene® SI 508 is a high molecular weig.. |