Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products CS30P100-01UV 30% Ceramic Sphere Reinforced Polypropylene, UV Stabilized, Black Applications: Consumer goodsHousingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products FRP257-01 32% Talc Reinforced Polypropylene Copolymer, Flame Retardant, Black Applications: Electrical component housingsConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products P249-01UV General Purpose Polypropylene Copolymer, UV Stabilized, Black Applications: LP bracketsSplash shieldsDoor/trunk scuffInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products P601-01 Polypropylene Copolymer, Black Applications: Engine componentChassis componentConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products RCC220-01 20% Calcium Carbonate Reinforced Polypropylene Copolymer, Black, Recycled Content Applications: I/P hush panelsSplash shieldsUnderhood componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Network Polymers NPP 50-0548 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products HP534-00 22% Talc Reinforced High Performance Polypropylene Copolymer, Natural Applications: Door trim panelsCenter consolesSteering columnsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 - ISO 527-2 |
DuPont Bexloy® AXW504BK Modified Ionomer Resin
(discontinued **) A modified ionomer resin engineered for injection molded exterior automotive applications.Availability: North AmericaInformation provided by DuPont. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 - ISO 527-2 |
DuPont Bexloy® AXW602NC010 3% Glass Reinforced, Heat Stabilized Modified Ionomer Resin
(discontinued **) A 3% glass reinforced, heat stabilized modified ionomer resin engineered for injection molded interior automotive applications.Availability: North AmericaInformation provided by DuPont. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D4745 |
3M Dyneon™ CC155 Custom Fluoropolymer Compound
(discontinued **) This compound consists of a mixture of 50% stainless steel blended with PTFE.Information provided by Dyneon, A 3M Company |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
LyondellBasell Alathon® ETP H4745 High Density Polyethylene ApplicationsALATHON H 4745 is a new, multi-purpose, high-flow resin featuring enhanced cold temperature impact performance, enhanced processability and thermal stability for fast cycling and exhibit.. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
LyondellBasell Alathon® ETP H4837 High Density Polyethylene ApplicationsALATHON H 4837 is a high-flow “freezer†grade resin that exhibits enhanced cold temperature impact performance, enhanced processability and thermal stability, with good color a.. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D1414 |
Greene Tweed CHEMRAZ® SD625 Perfluoroelastomer Chemraz® SD625, a black-colored perfluoroelastomer, offers the broadest chemical resistance of any elastomer, combining the resilience and sealing force of an elastomer with chemical resistance a.. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Teknor Apex APEX® 65002 Polyvinyl Chloride, Flexible Notes: 105°C Jacket; RoHS Compliant Features: Flame Retardant; Lead-free Uses: Communication Wire JacketingForms: Pellets Agency Ratings: NEC Article 725; NEC Article 760; NEC Article 770; NEC Ar.. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Teknor Apex APEX® 80851 Polyvinyl Chloride, Flexible Notes: 105°C Insulation; RoHS Compliant Forms: Pellets Uses: Insulation; Wire and Cable Applications Wire Types: AWM; THW; TW; THHN; THWN Agency Ratings: MIL W-16878; UL QMTT2 .E73402Information .. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Teknor Apex APEX® 80851-F Polyvinyl Chloride, Flexible Notes: 105°C Insulation; RoHS Compliant Forms: Pellets Uses Wire and Cable ApplicationsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Teknor Apex APEX® 82_E254V-14 Polyvinyl Chloride, Flexible Notes: 80°C Jacket; RoHS CompliantForms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D412 |
Teknor Apex MF 826 Polyvinyl Chloride, Flexible Film Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Film, Medical Applications Forms-PelletsInformation provided by Teknor Apex Company |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Teknor Apex APEX® 02-A0111A-90NT Polyvinyl Chloride, Flexible Notes: RoHS Compliant Forms: PelletsInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D412 |
Teknor Apex APEX® 2590-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-Natural Color, OpaqueForms-PelletsProcessin.. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 |
Teknor Apex APEX® 3610-90 Polyvinyl Chloride, Flexible Uses: Medical/Healthcare Applications Agency Ratings: NSF 61 Forms: Pellets Additional Information: First Generation SeriesInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 - ISO 527-2 |
DuPont Bexloy® AXW502NC010 Modified Ionomer Resin
(discontinued **) A modified ionomer resin engineered for injection molded exterior automotive applications.Availability: North AmericaInformation provided by DuPont. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | ASTM D638 - ISO 527-2 |
DuPont Bexloy® AXW604BK 3% Glass Reinforced, Heat Stabilized Modified Ionomer Resin
(discontinued **) A 3% glass reinforced, heat stabilized modified ionomer resin engineered for injection molded interior automotive applications.Availability: North AmericaInformation provided by DuPont. |
|||
Tensile Strength at Break | 22.1 MPa | 3200 psi | 2 in/min; ASTM D638 |
RheTech Products HP508-01UV 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, Black Applications: Interior trim, Close out panelsConsolesInjection molding conditions reported in table.Information provided by RheTech Products. |