Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Compressive Strength | 130 MPa | 18900 psi | Type B, 5mm/min; ISO 604:2002 |
Nylacast Aquanyl Nylon 612 Copolymer Aquanyl is a copolymer of Nylon 6 and Nylon 12 produced via the anionic polymerization process using the monomer's Caprolactam and Laurinlactam. It has reduced water absorption, improved stability a.. |
|||
Compressive Strength | 130 MPa | 18900 psi | Type B, 5mm/min; ISO 604:2002 |
Nylacast Cast Nylon 6, Glass Filled Information provided by Nylacast Ltd. |
|||
Compressive Strength | 130 MPa | 18900 psi | Type B, 5mm/min; ISO 604:2002 |
Nylacast Nylube Cast Nylon 6, Lubricated (Blended Solid and Liquid Lubricant) This supreme wear resistant grade contains a combined liquid/solid lubricant system, which allows for a coefficient of friction as low as 0.08. The material has outstanding Pressure-Velocity capabil.. |
|||
Compressive Strength | 130 MPa | 18900 psi | |
Poco Graphite Glassmate® GM Graphite This material has high strength and durability for applications with high wear. An exceptional insert material for precision thread pick up and long production runs. |
|||
Compressive Strength | 130 MPa | 18800 psi | ASTM D695 |
ITW Devcon Metal Repair Titanium Putty, Grey Information provided by ITW Devcon |
|||
Compressive Strength | 130 MPa | 18900 psi | ASTM D695 |
Plenco 05118-T5 Phenolic, Granular, Compression Molded PLENCO 05118-T5 is a mineral and graphite filled novolac phenolic molding compound with PTFE, formulated for bearing seals. 05118 provides for a low coefficient of friction, good wear resistance, ve.. |
|||
Compressive Strength | 130 MPa @Time 36.0 sec |
18900 psi @Time 0.0100 hour |
|
Wolf Kunststoff ZEDEX® ZX-324V11T A3L PEEK Polymer, Reinforced Main Charactistics: Stress resistant; High impact strength at 196 ° C Applications: Shipbuilding; Chemical Engineering; Automitve Technology; Machine ToolsInformation provided by Zedex |
|||
Compressive Strength | 130 MPa | 18900 psi | ASTM D695 |
Unitika UNILATE® 1 NC PET Flame resisting gradeUNILATE® products are plate materials prepared by using a polyethylene terephthalate (PET resin) as the main component, blending it with glass staple fiber, inorganic filler, a.. |
|||
Compressive Strength | 130 MPa @Temperature 23.0 °C, Time 86400 sec |
18900 psi @Temperature 73.4 °F, Time 24.0 hour |
50% RH, Axial; ISO 604; IEC/EN 61212-2 5.2 |
Elektro-Isola Etronit B 66 Phenolic, Paper Reinforcement, Dark Brown, Tubes Description: Specially designed for high-voltage insulation with high requirements for insulating capacity along the tube.Applications: Insulating tubes in high-voltage switchgear and tap changers.... |
|||
Compressive Strength | 130 MPa @Temperature 23.0 °C, Time 86400 sec |
18900 psi @Temperature 73.4 °F, Time 24.0 hour |
50% RH, Axial; ISO 604; IEC/EN 61212-2 5.2 |
Elektro-Isola Etronit IV C Phenolic, Paper Reinforcement, Yellow, Tubes Description: Suitable for electrical and mechanical applications where there is high air humidity. Lowest water absorption of all the Etronit types. Tropical grade. Good electrical properties at hig.. |
|||
Compressive Strength | 130 MPa @Temperature 23.0 °C, Time 86400 sec |
18900 psi @Temperature 73.4 °F, Time 24.0 hour |
50% RH, Axial; ISO 604; IEC/EN 61212-2 5.2 |
Elektro-Isola Etronit IV C S Phenolic, Paper Reinforcement, Black, Tubes Description: Suitable for electrical and mechanical applications where there is high air humidity. Lowest water absorption of all the Etronit types. Tropical grade. Good electrical properties at hig.. |
|||
Compressive Strength | 130 - 140 MPa | 18900 - 20300 psi | ISO 604 |
Bulk Molding Compounds tetra-DUR F 4001 Bulk Molding Compound UL-Licensed, Abrasion resistance, free of fiber glass.Typical Applications - Requiring mechanical strength, abrasion resistance, dimensional stability, electrical insulation, electrostatic dissipati.. |
|||
Compressive Strength | 130 MPa | 18900 psi | Cold Crushing Strength |
Gouda Vuurvast LP 85 KP Dense Refractory Brick Description: This mullite and phosphate bonded corundum brick has a very low porosity, a high strength and a good thermal shock resistance. This quality has a very good resistance against slag. Appl.. |