Plenco 05118-T5 Phenolic, Granular, Compression Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic , Phenolic, Novolac, Mineral/Graphite Filled
Manufacturer	Plenco (Plastics Engineering Company)
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plenco 05118-T5 Phenolic, Granular, Compression Molded.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

PLENCO 05118-T5 is a mineral and graphite filled novolac phenolic molding compound with PTFE, formulated for bearing seals. 05118 provides for a low coefficient of friction, good wear resistance, very low water absorption, and good dimensional stability under severe exposure. 05118 is available in grey.Information supplied by Plenco.

Physical Properties	Metric	English	Comments
Bulk Density	0.900 g/cc	0.0325 lb/in³	ASTM D1895
Density	1.83 g/cc	0.0661 lb/in³	ASTM D792
Water Absorption	0.035 %	0.035 %	ASTM D570
Linear Mold Shrinkage	0.00183 cm/cm	0.00183 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell E	59	59	ASTM D785
Tensile Strength, Ultimate	31.0 MPa	4500 psi	ASTM D638
Elongation at Break	0.34 %	0.34 %	ASTM D638
Tensile Modulus	10.3 GPa	1490 ksi	ASTM D638
Flexural Strength	55.0 MPa	7980 psi	ASTM D790
Flexural Modulus	10.6 GPa	1540 ksi	ASTM D790
Compressive Strength	130 MPa	18900 psi	ASTM D695
Izod Impact, Notched	0.167 J/cm	0.313 ft-lb/in	ASTM D256
Charpy Impact, Notched	0.179 J/cm²	0.852 ft-lb/in²	ASTM D256
Impact	56	56	J/m Drop Ball Impact; PLENCO

Thermal Properties	Metric	English	Comments
CTE, linear	38.0 µm/m-°C @Temperature 40.0 - 130 °C	21.1 µin/in-°F @Temperature 104 - 266 °F	TMA; ASTM E831
Maximum Service Temperature, Air	206 °C	403 °F	Heat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi)	197 °C	387 °F	ASTM D648
Shrinkage	0.040 %	0.040 %	72 hr, 120ºC; ASTM D1299

Users viewing this material also viewed the following: