Physical Properties | Metric | English | Comments |
---|---|---|---|
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
F50; ASTM D1693 |
Polimeros Mexicanos Rotolene® 93835-TG Medium Density Polyethylene MDPE Copolymer with UV8 stabilizer in natural and colors.Recommended for rotomolding. Used for manufacture of water tanks > 2000 liters, cisterns, farm tanks, or tanks to contain strong acids and b.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
Polimeros Mexicanos Rotolene® Natural Linear Medium Density Polyethylene Hexene Copolymer Linear Medium Density Polyethylene for rotational molding. This resin is fully UV8 stabilized. Available as natural and several colors powder compounds.High quality Polyethylene re.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | Condition A; ASTM D1693 |
NOVA Chemicals Novapol® TR-0735-UG Hexene MDPE Rotational Molding Resin Features: Good impact properties Excellent processabilityNSF listed for Stds. 14, 24 and 61 Applications: ToysComplex custom partsHome and garden itemsMailboxesInformation provided by Nova Chemicals.. |
|||
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
F<sub>50</sub>; Condition A, From compression molded specimens; ASTM D1693 |
NOVA Chemicals Sclair® 8107 UV8D Butene LLDPE Rotational Molding Resin Excellent ESCR, Excellent low temperature impact properties, Excellent low shrinkage and warpage properties, Very good processability, UL 94-HB listedApplications: Food and laundry materials handlin.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | Condition A, F<sub>50</sub>; ASTM D1693 |
Formosa Plastics Formolene® L63568 Rotational Molding LLDPE
(discontinued **) Linear Low Density Polyethylene Hexene Copolymer for Rotational Molding Formolene® L63568 is a general-purpose rotational molding linear low density resin made using the BP Gas Phase Process™. The.. |
|||
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
ASTM D1693 |
Unipetrol PE HD LITEN® FB 10 HDPE Made for tubular film applications.Information provided by Unipetrol RPA |
|||
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
ASTM D1693 |
Unipetrol PE HD LITEN® VL 20 HDPE Extrusion and pipe applications.Information provided by Unipetrol RPA |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693 |
A. Schulman SCHULAFLEX® SF 230 Ethylene-Based Butene Plastomer DescriptionSchulaflex SF230 is an ethylene-based butene plastomer. Available in natural as a non-UV stable product. It can be compounded as natural or colors with a full UV package.NOTE: Physical .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693 |
Total HDPE MS201 BN-NA High Density Polyethylene - Fuel Tank Resin Polyethylene: High molecular weight, high density fuel tank resin.Characteristics:Good melt strengthGood impact and creep resistanceExcellent stress cracking resistanceGMP.PE.062 certification.Appl.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
A. Schulman POLYAXIS® PD8020 Polypropylene DescriptionPolyaxis PD 8020 is a polypropylene designed from rotational molding with a combination of good stiffness and ESCR.NOTE: Physical properties are based on rotationally molded samples from .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693 |
A. Schulman SCHULAFLEX® SF 230 Ethylene-Based Butene Plastomer DescriptionSchulaflex SF230 is an ethylene-based butene plastomer. Available in natural as a non-UV stable product. It can be compounded as natural or colors with a full UV package.NOTE: Physical .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693 |
A. Schulman SCHULINK® X XL350 Cross-Linkable, High Density Polyethylene DescriptionSchuLink XL 350 is a cross-linkable, high density polyethylene used from rotational molding. This resin offers high impact strength, good abrasion resistance, good stiffness, and excelle.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693 |
A. Schulman SCHULAFLEX® SF 230 Ethylene-Based Butene Plastomer DescriptionSchulaflex SF230 is an ethylene-based butene plastomer. Available in natural as a non-UV stable product. It can be compounded as natural or colors with a full UV package.NOTE: Physical .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
A. Schulman POLYAXIS® CP812 Stabilized Compounded Rotational Molding Resin DescriptionPolyaxis CP 812 is a stabilized compounded rotational molding resin with a combination of good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | Condition A; ASTM D1693 |
A. Schulman LP544-01 High-Density Copolymer Polyethylene DescriptionLP 544-01 is a high-density copolymer polyethylene with exceptional ESCR and crush strength combined with good processability for applications including telecommunication ducting, thermof.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
A. Schulman POLYAXIS® CP812 Stabilized Compounded Rotational Molding Resin DescriptionPolyaxis CP 812 is a stabilized compounded rotational molding resin with a combination of good flow and stiffness. NOTE: Physical properties are based on rotationally molded samples from .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | Condition A, F50; ASTM D-1693 |
Chevron Phillips Marlex® HHM TR-232 Polyethylene; Enhanced Low density linear polyethylene. This low density, linear resin is tailored for blow molded containers that require: Excellent processabilityExcellent ESCRApplications: Typical blow molded applica.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | Condition A, F50; ASTM D-1693 |
Chevron Phillips Marlex® HMN TR-938/938G Polyethylene; MDPE Medium density polyethylene. These hexene copolymers are tailored for rotational molding applications that require: Wide process windows and good flowLong-term UV stabilizationExcellent impact stre.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1963 |
ExxonMobil HDPE BU46-055 High Density Polyethylene Resin Product Description: BU46-055 is a high molecular weight, high density polyethylene copolymer which contains a UV inhibitor. It possesses a combination of excellent processability, outstanding melt .. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
ExxonMobil LL 8360.29 Rotational Molding Resin Product Description: LL 8360 is a linear low density hexene copolymer designed to offer excellent processability along with outstanding dimensional control and low warpage. This resin is ideally sui.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
ExxonMobil LL 8450.31 Rotational Molding Resin Product Description: LL 8450 is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness and ESCR. They are ideally suited for applications that require.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693B |
ExxonMobil LLDPE LL 8450.31 Linear Low Density Polyethylene Resin Product Description: LL 8450 is a linear low density hexene copolymer designed to offer excellent stiffness, processability, whiteness and ESCR. They are ideally suited for applications that require.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | F50; ASTM D1693A |
ExxonMobil Paxon™ 7004 Crosslinkable Rotational Molding Resin Product Description: Paxon™ 7000 series of crosslinkable mHDPE resins are designed to offer outstanding ESCR, toughness, thermal, impact and notch failure resistance. These resins are ideally suite.. |
|||
ESCR 100% Igepal® | >= 1000 hour @Thickness 2.00 mm, Temperature 50.0 °C |
>= 1000 hour @Thickness 0.0787 in, Temperature 122 °F |
0.3 mm notched-plaques; ASTM-D1693 |
Braskem GP100OR HDPE High Density Extrusion Polyethylene GP100OR is a high-density polyethylene compound specially developed for the manufacturing of extruded pipes for gas distribution. It is produced with bimodal technology and has high molar mass. It s.. |
|||
ESCR 100% Igepal® | >= 1000 hour @Thickness 2.00 mm, Temperature 50.0 °C |
>= 1000 hour @Thickness 0.0787 in, Temperature 122 °F |
0.3 mm notched-plaques; ASTM-D1693 |
Braskem ML3601U LLDPE Rotomolding Polyethylene The resin ML3601U is a linear low-density polyethylene, 1-hexene based, with excellent environmental stress cracking resistance and high impact strength. It contains long term UV8 stabilization and .. |
|||
ESCR 100% Igepal® | 1000 hour | 1000 hour | >1,000; ASTM D-1693 |
Bapolene® 3039U Polyethylene, Rotational Molding Grade Bapolene 3039U is a hexene linear low density polyethylene designed to provide superior impact resistance. It contains a UV-stabilization package and complies with US FDA 21CFR177.1520.Applications.. |
|||
ESCR 100% Igepal® | >= 1000 hour | >= 1000 hour | ASTM D1693 |
ExxonMobil LL 8360 Rotational Molding Resin
(discontinued **) LL 8360 is a linear low density hexene copolymer designed to provide good processability along with outstanding dimensional control and low warpage. This resin is ideally suited for applications tha.. |
|||
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
F<sub>50</sub>; Condition A, From compression molded specimens; ASTM D1693 |
NOVA Chemicals Novapol® TR-0242-UG MDPE Rotational Molding Resin
(discontinued **) Hexene copolymer, Excellent impact, Excellent ESCRApplications: Large parts, Agricultural storage tanksAdditives: Processing antioxidants, UV stabilizersInformation provided by NOVA Chemicals. |
|||
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
F<sub>0-</sub>; ASTM D1693 |
Chevron Phillips HiD® 9330T HDPE Natural Pipe Resin
(discontinued **) Resin Type: Gas Phase Linear Hexene CopolymerASTM D 4976 Classification: PE 235, A 54607ASTM D3350 Classification: 335540AApplications: Base resin for use in utility and conduit pipe applications.Da.. |
|||
ESCR 100% Igepal® | >= 1000 hour @Temperature 50.0 °C |
>= 1000 hour @Temperature 122 °F |
ASTM D1693 |
Unipetrol PE HD LITEN® VL 29 HDPE Extrusion and pipe applications.Information provided by Unipetrol RPA |