Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 7.71 g/cc | 0.279 lb/in³ | Sintered |
Kinetics MIM K3 Heat Treat K3 is a custom Mo-Fe alloy that provides improved fatigue properties over many other steel alloys while still maintaining good strength components, industrial or structural components and other appl.. |
|||
Density | 7.71 g/cc | 0.279 lb/in³ | Sintered |
Kinetics MIM K3 Heat Treat as Sintered K3 is a custom Mo-Fe alloy that provides improved fatigue properties over many other steel alloys while still maintaining good strength components, industrial or structural components and other appl.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Latrobe LSSâ„¢ Chipper Knife Tool Steel (ASTM A8 Mod.) TLS Chipper Knife tool steel is an air-hardening, 8% chromium tool steel which exhibits very good wear resistance and toughness. TLS Chipper Knife exhibits wear resistance which is better than that.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Schmolz + Bickenbach UgiPermâ„¢ 12FM Stainless Steel Bar Description: UgiPermâ„¢ 12FM is a 12% chrome ferritic stainless with improved magnetic properties designed for use in electro-injectors, valves and many other applications. The grade was develope.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | Weld Deposit Property |
The NanoSteel® Company SHS 9290 PTAW Steel Alloy, Atomized Powder Coating Description: SHS 9290 PTAW is an iron based steel alloy with a near nanoscale (submicron) microstructure that features extreme wear and abrasion resistance with high toughness. SHS 9290 PTA.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
Williams Advanced Alloys WS217 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | hardened to 62 HRC |
Bohler-Uddeholm AISI A2 Cold Work Tool Steel Description: AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized byAISI A2 is characterized by: Good machinability High stability after hardening High c.. |
|||
Density | 7.72 g/cc @Temperature 199 °C |
0.279 lb/in³ @Temperature 390 °F |
hardness of 40 HRC |
Bohler-Uddeholm UDDEHOLM ALVAR 14 Hot Work Tool Steel Alvar 14 is a chromium-nickel-molybdenumvanadium alloyed steel ALVAR 14 is characterized by: Good toughnessGood resistance to high thermal stresses Good stability in hardeningGood through-hardening.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
AK Steel 410S Ferritic Stainless steel AK Steel 410S Stainless Steel is a non-hardening modification of Type 410. A small titanium addition minimizes austenite formation at high temperatures, thereby restricting the alloy's ability to h.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Carpenter Extendo-Die® Hot Work Die Steel, Tempered 538°C (1000°F) Data provided by Carpenter Technology Corporation.This steel combines extreme toughness with good red hardness in large section sizes. This alloy may also be considered for many cold work applicati.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Carpenter Extendo-Die® Hot Work Die Steel, Tempered 560°C Data provided by Carpenter Technology Corporation.This steel combines extreme toughness with good red hardness in large section sizes. This alloy may also be considered for many cold work applicati.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Assab Steels ASSAB 88 Cold Work Steel ASSAB 88 (SLEIPNER) is a chromium-molybdenum-vanadium alloyed tool steel which is characterized by:Good wear resistanceGood chipping resistanceHigh compressive strengthHigh hardness (>60HRC) after h.. |
|||
Density | 7.72 g/cc @Temperature 200 °C |
0.279 lb/in³ @Temperature 392 °F |
|
Assab Steels CALMAX Plastic Mold Material CALMAX is a chromium-molybdenum-vanadium alloyed steel characterized by:High toughnessGood wear resistanceGood through hardening propertiesGood dimensional stability in hardeningGood polishabilityGo.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum 440A Martensitic Stainless Steel Characteristics: superior wear resistance, hardenable, excellent corrosion resistance. Applications:cutlery, dental and surgical instruments, nozzles, valve parts, hardened steel ball and seats for.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 425 Mod, Hardened + 427°C Temper Allegheny Ludlum Type 425 Mod is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stai.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 425 Mod, Hardened + 316°C Temper Allegheny Ludlum Type 425 Mod is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stai.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel AL 410S™ (UNS S41008) Allegheny Ludlum Al 410S™ stainless steel is a low-carbon modification of Type 410 stainless steel. Low carbon and optionally a small addition of titanium and /or columbium minimize austenite form.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Carpenter Extendo-Die® Hot Work Die Steel, Tempered 593°C Data provided by Carpenter Technology Corporation.This steel combines extreme toughness with good red hardness in large section sizes. This alloy may also be considered for many cold work applicati.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Carpenter Extendo-Die® Hot Work Die Steel, Tempered 621°C Data provided by Carpenter Technology Corporation.This steel combines extreme toughness with good red hardness in large section sizes. This alloy may also be considered for many cold work applicati.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum AL 4466™ Ferritic Stainless Steel Low carbon, low nitrogen ferritic stainless steel alloy. Characteristics:outstanding resistance to chloride pitting and crevice corrosion, improved resistance over austenitic stainless steels to ch.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 425 Mod, Hardened + 204°C Temper Allegheny Ludlum Type 425 Mod is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stai.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 420, Hardened + 538°C Temper Allegheny Ludlum Type 420 is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainles.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 420HC Allegheny Ludlum Type 420HC is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainl.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 425 Mod, Annealed Allegheny Ludlum Type 425 Mod is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stai.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 425 Mod, Hardened + 288°C Temper Allegheny Ludlum Type 425 Mod is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stai.. |
|||
Density | 7.72 g/cc | 0.279 lb/in³ | |
Schmolz + Bickenbach Cryodur® 2363 (A-2) Cold Work Die Steel Description: Cryodur® 2363 is a cold-work steel developed for an excellent combination of wear resistance and toughness and Supplied in the annealed conditionCharacteristics: Good wear resistance; .. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 420, Annealed Allegheny Ludlum Type 420 is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainles.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 420, Hardened + 204°C Temper Allegheny Ludlum Type 420 is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainles.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 420, Hardened + 316°C Temper Allegheny Ludlum Type 420 is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainles.. |
|||
Density | 7.73 g/cc | 0.279 lb/in³ | |
ATI Allegheny Ludlum Martensitic Stainless Steel Type 420, Hardened + 427°C Temper Allegheny Ludlum Type 420 is a hardenable straight-chromium stainless steel which combines superior wear resistance of high carbon alloys with the excellent corrosion resistance of chromium stainles.. |