Polymer Property : Density = 0.0387 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
SABIC Innovative Plastics GELOY CR3020 ASA Low-gloss ASA for profile and capstock applications
Density	1.07 g/cc @Temperature 23.0 °C	0.0387 lb/in³ @Temperature 73.4 °F	±0.02; ISO 1183
PolyOne Bergamid™ B70 VN4805 LS PM-Z BK Polyamide 6 (Nylon 6) Information provided by PolyOne
Density	1.07 g/cc	0.0387 lb/in³
Polimeri Europa EDISTIR PD RK4514H High Impact Polystyrene (HIPS) (discontinued **) Symbol according to ISO 1043-1: S/B Designation: Thermoplastic ISO 2897-SB,M,093-06-07-23 UL94 V-2, polybromodiphenylether (PBBE) free, antimony free, HIPS satisfying at 960°C the glow wire test..
Density	1.07 g/cc	0.0387 lb/in³	ASTM D792
PTS Trimid® N66-S100L High Impact Nylon 6/6 Information provided by Polymer Technology and Services, LLC (PTS).
Density	1.07 g/cc	0.0387 lb/inÂ³	ASTM D792
IRPC Polimaxx Polene 2511HX GA5 Polypropylene Compound CHARACTERISTICS: POLYPROPYLENE BLOCK COPOLYMER WITH 25% GLASS FIBRE REINFORCED VERY HIGH IMPACT STRENGTH, HIGH MECHANICAL STRENGTH, LOW SHRINKAGE, HIGH STIFFNESS, CONTAIN UV STABILIZER AND LONG TERM..
Density	1.07 g/cc	0.0387 lb/inÂ³	ASTM D792B
LyondellBasell Astryn BC78A Polypropylene Copolymer, 23% Talc Key Features: high melt flow, high modulus, mineral-filled polypropylene copolymer, high rigidity, good colorability, good processabilityApplications: automotive interior trim components, pillar mol..
Density	1.07 g/cc	0.0387 lb/inÂ³	ASTM D792
Techmer ES ElastoblendÂ® PA6 IM 811 HS L (Dry) Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Impact Modified and LubricatedTPCI# 6109102Information provided by TP Comp..
Density	1.07 g/cc	0.0387 lb/inÂ³	ASTM D 792
Shakespeare Isocorâ„¢ SVP6100 Nylon 610 Isocorâ„¢ 6100 is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocorâ„¢ 6100 is also u..
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Styrolution LuranÂ® S 778 UV Colored ASA Description: Injection molding grade with enhanced toughness and resistance to heat distortion. Especially suitable for exterior automotive components (e.g. radiator grills, rear end appliquÃ© pan..
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Styrolution TerblendÂ® N NM-21 EF Gray 38058 ABS+PA (Dry) Description: TerblendÂ® N NM-21 EF is an UV stabilized ABS/PA blend combining very high impact strength, even at low temperatures. The enhanced flowability enables excellent processability and sur..
Density	1.07 g/cc	0.0387 lb/inÂ³
Solvay MACKADETÂ® SBC--8 Surfactant Product Description: Mackadet SBC-8 is a concentrated blend of mild surfactants for use as a base for high foaming surfactant systems. Mackadet SBC-8 responds rapidly to viscosity building with the ..
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
SABIC Innovative Plastics NORYL GTX GTX944 PPE+PA (Europe-Africa-Middle East) NORYL GTX944 is an unfilled GTX grade with improved processability and increased impact performance.
Density	1.07 g/cc	0.0387 lb/inÂ³
Sax Polymers SAXALEN PPH305G30 Polypropylene Homopolymer, 30% Glass Filled SAXALEN PPH305G30 is a 30% glass filled Polypropylene - Homopolymer injection molding grade with high stiffness, low creep under load and good flow properties.Information provided by SAX Polymers
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
Borealis Daplen™ EE260AI Polypropylene TPO Compound Daplen™ EE260AI is a 20 % mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and is easy to process...
Density	1.07 g/cc	0.0387 lb/in³	ASTM D792
Toyobo PELPRENE™ P40BU Polyester TPE, Weather-resistant Features: Polyester TPE, Weather-resistantInformation provided by Toyobo.
Density	1.07 g/cc	0.0387 lb/in³
Loctite® 641 Controlled Strength Retaining Compound RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. ..
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
CP-Polymer-Technik Wellamid® 6600/58 HWCP Nylon 66, Impact Modified Until -40°C, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
EMS-Grivory Grivory® XE 3959 nat PA610 Product description: Grilamid XE 3959 natural is a high viscosity Polyamide 610 especially suitable for extrusion applications. This PA610 product is to a large extent based on renewable raw materia..
Density	1.07 g/cc	0.0387 lb/in³	ASTM D792, ISO 1183
EPICHEM Epilen PP 20GF NAT Polypropylene, 20% Glass Fiber Characteristics: 20% glass fibre filled
Density	1.07 g/cc	0.0387 lb/in³	ASTM D792
Aclo Accutech Polyethylene HD0234G20UVL High Density Glass Reinforced UV Stabilized
Density	1.07 g/cc	0.0387 lb/in³	ASTM D792
Adell BD-30 Nylon 6, Ultra High Impact Data provided by Adell Plastics, Inc.
Density	1.07 g/cc	0.0387 lb/in³	ASTM D792
Toyobo PELPRENE™ P40B Polyester TPE Features: Polyester TPEInformation provided by Toyobo.
Density	1.07 g/cc	0.0387 lb/in³	ISO data
BASF Capron® 8351 Impact Modified Nylon 6 (Dry) (discontinued **) Capron 8351 is a type 6 polyamide graft copolymer developed for injection molding applications requiring a high level of toughness combined with moderate flexibility and faster cycles. It is also ..
Density	1.07 g/cc	0.0387 lb/in³	Sintered Part; ASTM D792
ALM FR 106 Nylon 11 SLS Prototyping Polymer This flame retardant rapid prototyping material has additives in the raw material that allows it to pass aeronautic standard FAR25.853 smoke, flame, and toxicity tests. This material is ideal for Ae..
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
Unitika EX-1222 PA6, Conditioned High-impact nylonInformation provided by Unitika Ltd.
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
EMS-Grivory Grivory® LC-15H black PA12-CF15 Product description: Grilamid LC-15H black is a Polyamide 12 injection molding product reinforced with 15% carbon fibers. The product is inherently black and is only available in this color.Main Att..
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
Arkema Group Pebax® MV 2080 Polyether Block Amide (PEBA) Polyether block amide PEBAX® MV 2080 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. MV 2080 is an inherently dissipative polymer and can be dry blended or compounded w..
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
SABIC Innovative Plastics LNP STAT-KON MFD03 PP (Asia Pacific) LNP* Stat-kon* MFD03 is a compound based on Polypropylene resin containing Glass Fiber, Carbon Powder. Added features of this material include: Electrically Conductive.
Density	1.07 g/cc	0.0387 lb/in³	ASTM D 792
Shakespeare Isocor™ HW69SI Nylon 610 Isocor™ HW69SI is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ HW69SI is also used..