Polymer Property : Density = 0.944 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	0.944 g/cc	0.0341 lb/in³	Compression Molded; ASTM D792
NOVA Chemicals Surpass® RMs244-UG Octene sHDPE Rotational Molding Film Features: Octene copolymerExceptional low temperature propertiesOutstanding stiffnessBroad processing windowSuperior whiteness for improved part appearanceEasy mold releaseNSF listed for Standards 1..
Density	0.944 g/cc	0.0341 lb/in³	ExxonMobil Method
ExxonMobil Escorene® LD 722.MV Molding, extrusion and compounding resin (discontinued **) Escorene Ultra LD 722.MV is a high vinyl acetate copolymer resin for specialty extrusion and compounding application. Articles made from LD 722.MV are soft and have excellent low temperature toughne..
Density	0.944 g/cc	0.0341 lb/inÂ³	ASTM D4883
Ineos K44-15-186 Polyethylene Copolymer K44-15-186 is a blue high-density polyethylene copolymer designed specifically for extrusion of pipe by blending K44-15-122 natural resin with G38-70C BLU II concentrate or an approved equivalent. I..
Density	0.944 g/cc	0.0341 lb/inÂ³	ASTM D4883
Ineos K44-24-122 HDPE K44-24-122 is a high density polyethylene copolymer designed specifically for pipe coating and extrusion. It complies with the virgin polyethylene resin requirements in CZA Z245-21.Natural resin; s..
Density	0.944 - 0.950 g/cc	0.0341 - 0.0343 lb/inÂ³	ASTM D792-98
Ipiranga Petrochem HD 7555 LS-L HDPE IPQ produces High Density Polyethylene (HDPE) for use by different segments of the plastics molding industry in several processes, including blow molding, extrusion and injection molding.To produce ..
Density	0.944 g/cc	0.0341 lb/inÂ³	ISO 1183
Iran Petrochemical (PCC) EX 1 HF 7740F2 High Density Polyethylene EX1 (HF 7740F2) is high density polyethylene with Butene-1 as co monomer. It is a medium molecular mass with a narrow molar mass distribution.Application: stretched film tape used in manufacture o..
Density	0.944 g/cc	0.0341 lb/inÂ³	ASTM D792
Micropol Isoplas P381 Crosslinkable Polyethylene Information provided by Micropol Limited
Density	0.944 g/cc	0.0341 lb/inÂ³	ASTM D4883
Ineos K44-06-122 HDPE HDPE K44-06-122 is a natural high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. It is recognized by the Plastic Pipe Institute as ..
Density	0.944 g/cc	0.0341 lb/inÂ³	ASTM D4883 (Natural)
Ineos K44-08-122 HDPE K44-08-122 is a natural high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. It is recognized by the Plastic Pipe Institute as havin..
Density	0.944 - 0.948 g/cc	0.0341 - 0.0342 lb/inÂ³	DIN 53479
Iran Petrochemical (PCC) Arak BL2 HDPE Information provided by Iran Petrochemical Commercial Co.
Density	0.944 g/cc	0.0341 lb/inÂ³	DIN 53479/ASTM D1505
Silon Taborex TA 1132 HD Chemically-Crosslinkable HDPE Compound TABOREX TA 1132 HD is a crosslinkable compound made of Silane grafted ethylene polymer. This graft polymer constitutes together with a Masterbatch containing the crosslinking catalyst a â€œSIOPLA..
Density	0.944 g/cc	0.0341 lb/in³	Base Resin; ISO 1183
Borealis BorPEX™ HE2590 High Density Polyethylene Compound for Crosslinked Pipes (Pex-C (Irradiation)) BorPEX HE2590 is a high molecular weight, high density polyethylene compound for crosslinkable pipes, especially designed for electron beam irradiation crosslinking. The stabilization is optimized ..
Density	0.944 g/cc	0.0341 lb/in³	ISO 1183/ISO 1872-2
Borealis Borstar® HE 6068 Natural Bimodal HDPE with very low shrinkage for Submarine and Fiber Optical Cables Borstar® HE6068 is a natural, UV-stabilized, colorable, bimodal high density (HD) jacketing compound, which is produced with the Borealis proprietary Borstar® bimodal process technology. Borstar®..
Density	0.944 g/cc	0.0341 lb/in³	ISO 1183
Borealis Borstar® ME3441 Yellow Medium Density Polyethylene for Natural Gas Pipes Borstar ME3441 is a yellow, bimodal, cadmium free, medium density polyethylene compound classified as a MRS 8.0 material (PE80) produced with the advanced Borstar technology. It includes a combinat..
Density	0.944 g/cc	0.0341 lb/in³	ASTM D792 - ISO 1183
DuPont Elvaloy® 1125 AC Ethylene and 25% Methyl Acrylate Copolymer Elvaloy® 1125 AC is intended for coextrusion and molding. It can be recommended for blow molding of parts requiring permanent flexibility, stress cracking resistance and softness. Excellent fill..
Density	0.944 g/cc	0.0341 lb/in³	ASTM D792 - ISO 1183
DuPont Elvaloy® 1224 AC Ethylene and 24% Methyl Acrylate Copolymer Elvaloy® 1224 AC is intended for extrusion, coextrusion, compounding and injection molding. Elvaloy® 1224 AC has good adhesion to various substrates (OPA, OPP, paperboard, etc.), gives excellent ..
Density	0.944 g/cc	0.0341 lb/in³	ASTM D1505
Westlake EMAC® SP2260 24% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® SP2260 is a 24% EMA copolymer designed for blown or cast film, tie-layers, and extrusions where flexibility, compatibility, or low heat seal temperatures are required. SP2260 provide..
Density	0.944 g/cc	0.0341 lb/in³	Natural; ASTM D1505
Formosa Plastics Formolene® HP4401 Pipe HDPE High Density Hexene CopolymerApplications: Potable water, industrial mining, oil and gas gatheringsFormolene HP4401 is a high performance copolymer that is designed for the most demanding requiremen..
Density	0.944 g/cc	0.0341 lb/in³	masterbatch; ASTM D-1505
Chevron Phillips Marlex® M368 Polyethylene; Masterbatch This black masterbatch with its medium density polyethylene (MDPE) carrier resin has been formulated for pipe applications that require: Good long-term hoop strengthExtended outdoor lifeClean N550 ..
Density	0.944 g/cc	0.0341 lb/in³	natural resin; ASTM D792
Dow DGDB-2480 NT High Density Polyethylene Resin DOW DGDA-2475 NT is produced using UNIPOL™ process technology. It is intended for use in pipe applications where long term hydrostatic strength and resistance to slow crack growth are desired. Su..
Density	0.944 g/cc	0.0341 lb/in³	ASTM D792, ISO 1183
DuPont™ Elvaloy® AC 15024S Ethylene Methyl Acrylate Elvaloy® AC 15024S is a copolymer of ethylene and methyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins. Elvaloy®..
Density	0.944 g/cc	0.0341 lb/in³	ISO 1183
Arkema Group OREVAC® 18510 Grafted Maleic Anhydride Polyethylene OREVAC 18510 is a maleic anhydride grafted polyethylene used in the manufacturing of three layer MDPE or HDPE coating for steel pipeline. It is a powder product. OREVAC 18510 is mainly used in pipe ..
Density	0.944 g/cc	0.0341 lb/in³	ISO 1183
Arkema Group OREVAC® 18510P Grafted Maleic Anhydride Polyethylene OREVAC 18510P is a maleic anhydride grafted polyethylene used in the manufacturing of three layer MDPE or HDPE coating for steel pipeline. It is a powder product. OREVAC 18510P is mainly used in pip..
Density	0.944 g/cc	0.0341 lb/in³	ASTM-D792
Braskem GM7746C HDPE Blow Molding Polyethylene GM7746C is a high-density polyethylene specially developed for the manufacturing of blow molding fuel tanks. It has high molar mass and excellent mechanical properties. It also shows excellent tenac..
Density	0.944 g/cc	0.0341 lb/in³	ASTM-D792
Braskem GM7746CA HDPE Blow Molding Polyethylene GM7746CA is a high-density polyethylene specially developed for the manufacturing of blow molding fuel tanks. It has high molar mass and excellent mechanical properties. It also shows excellent tena..
Density	0.944 g/cc	0.0341 lb/in³	Natural; ASTM D1505
Formosa Plastics Formolene® HP4306 Pipe HDPE (discontinued **) High Density Hexene Copolymer Formolene® HP4306 is a high performance copolymer that is designed for the most demanding requirements of pressure pipe applications. It is designed specifically for l..
Density	0.944 g/cc	0.0341 lb/in³	Base Resin; ISO 1183
Borealis BorPEX™ HE2591 High Density Polyethylene Powder for Crosslinked Pipes (Pex-C (Irradiation)) BorPEX HE2591 is a high molecular weight, high density polyethylene powder for crosslinkable pipes, offering excellent processability for peroxide crosslinking. It is a special polymer, stabilized ..
Density	0.944 g/cc	0.0341 lb/in³	ASTM D1505
Braskem HF 0144 HDPE Blown Film Extrusion Polyethylene 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags. Information provided by Bras..
Density	0.944 g/cc	0.0341 lb/in³	ASTM D792 - ISO 1183
DuPont Elvaloy® 1126 AC Ethylene and 25% Methyl Acrylate Copolymer (discontinued **) Elvaloy® 1126 AC is intended for coextrusion and molding. It can be recommended for blow molding of parts requiring permanent flexibility, stress cracking resistance and softness. Excellent fill..
Density	0.944 g/cc	0.0341 lb/in³	Base Density; ASTM D1505
Chevron Phillips Marlex® M362 LLDPE Pipe and Corrugated Extrusion Resin (discontinued **) Characteristics: Good long-term hoop strengthExtended outdoor lifeClean N550 carbon blackApplications: PipesNot recommended for contact with food productsInformation provided by Chevron Phillips.