- HOME
- POLYMER SEARCH
- Lubricant
- ExxonMobil Exterex™ P61 Synthetic Fluid
ExxonMobil Exterex™ P61 Synthetic Fluid
| Category | Fluid , Lubricant |
| Manufacturer | Exxon Chemical |
| Trade Name | Exterex™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ExxonMobil Exterex™ P61 Synthetic Fluid.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Product Description: Esterex™ Phthalate Esters are API category Group V fluids. Esterex™ Phthalate Esters have excellent lower-temperature properties, good lubricating properties and low volatilities. Esterex™ Phthalate Esters can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. These esters are ideal for use in air compressor applications, where low viscosity indices are acceptable and low-cost, clean operation is desirable.Appearance: Bright & ClearAvailability: Asia Pacific, Central America, North America and South AmericaInformation provided by ExxonMobil
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.967 g/cc @Temperature 15.6 °C |
0.0349 lb/in³ @Temperature 60.1 °F |
ASTM D4052 |
| Viscosity Measurement | 62 | 62 | Index; ASTM D2270 |
| Kinematic Viscosity | 11810 cSt @Temperature -40.0 °C |
11810 cSt @Temperature -40.0 °F |
ASTM D445 |
| Kinematic Viscosity at 40°C (104°F) | 38 cSt | 38 cSt | ASTM D445 |
| Kinematic Viscosity at 100°C (212°F) | 5.4 cSt | 5.4 cSt | ASTM D445 |
| Evaporation Loss | 15.3 % @Temperature 205 °C, Time 23400 sec |
15.3 % @Temperature 401 °F, Time 6.50 hour |
ASTM D972 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Pour Point | -42.2 °C | -44.0 °F | ASTM D5950/D97 |
| Flash Point | 209 °C | 408 °F | PMCC; ASTM D92 |
| 224 °C | 435 °F | COC; ASTM D92 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.4829 | 1.4829 | ASTM D1218 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Acid Value | <= 0.070 | <= 0.070 | [mg KOH/g]; ASTM D974 (mod) |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Aniline Point | <68°F | ASTM D611 |
| Biodegradation | 0.714 | OECD 301F |
| Color | <0.5 | ASTM D1500 |
| Composition | Water | <1000 ppm, ASTM D6304 (mod) |
| Density Correction Factor | 0.000724 (g/cc)/°C | ASTM D1250 |
| Elastomer Compatibility | 0 | Fluoroelastomer Elongation Change, ASTM D471 |
| -0.04 | Fluoroelastomer Hardness Change, ASTM D471 | |
| 0.046 | Fluoroelastomer Volume Change, ASTM D471 | |
| -0.21 | Nitrile Hardness Change, ASTM D471 | |
| -0.25 | Polyacrylate Hardness Change, ASTM D471 | |
| -0.257 | Nitrile Tensile Strength Change, ASTM D471 | |
| -0.289 | Fluoroelastomer Tensile Strength Change, ASTM D471 | |
| -0.298 | Nitrile Elongation Change, ASTM D471 | |
| 0.39 | Nitrile Volume Change, ASTM D471 | |
| -0.394 | Polyacrylate Elongation Change, ASTM D471 | |
| -0.534 | Polyacrylate Tensile Strength Change, ASTM D471 | |
| 0.652 | Polyacrylate Volume Change, ASTM D471 | |
| Fire point | 514°F | COC, ASTM D92 |
| Hydrolytic Stability, TAN Change | 0.02 mg KOH/g | ASTM D2619 |
| Kauri-Butanol Value | 80 | ASTM D1133 |
| Noack Volatility | 0.093 | ASTM D5800/DIN 51581 |
| RPVOT | >2610 min | With AO, ASTM D2272 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycoloy® C2951 PC+ABS (Asia Pacific)
- Premix Thermoplastics PREWHITE PP 51-50
- JPJ Technologies 8200B HDPE Blow Molding
- SABIC Innovative Plastics LNP LUBRICOMP SFL2A PA 12 (Asia Pacific)
- Shinkong Synthetic Fibers Shinite® C501G40 Nylon 6, 40% Glass Filled
- UBE UBEPOL VCR150 Synthetic Rubber Vulcanizate (Cured 50 Minutes at 145°C)
- ExxonMobil Mobil 1 Racing 2T Motorcycle Oil 2-Cycle
- ExxonMobil Teresstic 77
- Zeon Chemicals Hydrin® T3000LL Polyepichlorohydrin Elastomer
Copyright © lookpolymers.com All Rights Reserved