Electrical Properties | Metric | English | Comments |
---|---|---|---|
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | STN IEC 60093 |
Plastcom SLOVALEN PC 78 FRD 1 Polypropylene Copolymer, Halogen Flame Retardant, UV Stabilized FeaturesModified copolymer PP with the possibility of changing the MFI within the interval 5 - 20 g/10min. Stabilized against the UV-radiation by the UV stabilizer on the HALS basis. Retarded with.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Kolon KOCETAL® K100 Standard Grade Acetal Resin Suitable for extrusion and injection molding of thick products. Applications: Extruded use such as rod, pipe, tube, and sheetInformation provided by API Kolon. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
LG Chemical LUCON PN9008 PPS+MF+GF Injection Molding Grade, PPS+MF+GF, High Thermal Conductivity, Chemical Resistance, High Heat ResistanceApplication: Electrical or Electronic Parts (Heat sink, LED etc.), Motor HousingsCAS No. 25212.. |
|||
Surface Resistance | >= 1.00e+16 ohm | >= 1.00e+16 ohm | IEC 60093 |
Lanxess Pocan® B 3215 Z 000000 PBT, 10% Glass Fiber PBT, 10% glass fibers, injection molding, impact modified |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Solvay Specialty Polymers Ryton® R-4-222NA Polyphenylene Sulfide (PPS), 40% Glass Fiber Ryton® R-4-222NA 40% glass fiber reinforced polyphenylene sulfide compound provides enhanced mechanical strength after constant or repeated exposure to high temperature water and complies with Un.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Solvay Specialty Polymers Ryton® R-7-120BL Polyphenylene Sulfide (PPS), GlassMineral Filled Ryton® R-7-120NA and R-7-120BL glass fiber and mineral filled polyphenylene sulfide compounds provide good strength and low maintenance molding using conventional molding equipment.Features: Good.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Teijin Multilon T-3713 Standard PC/ABS Polymer Alloy General grade of PC/ABS polymer alloy, having improved impact strength and heat resistance compared with a heat resistant ABS and flame retardant m-PPE and also having higher flowability compared wi.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
SABIC Innovative Plastics LNP THERMOCOMP Lexan_LGN2000 PC (Asia Pacific) |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
SABIC Innovative Plastics NORYL NF2020 PPE+PS (Asia Pacific) |
|||
Surface Resistance | >= 1.00e+16 ohm | >= 1.00e+16 ohm | ROA; IEC 60093 |
SABIC Innovative Plastics LNP Thermocomp RF00AES PA 66 (Europe-Africa-Middle East) LNP THERMOCOMP* RF00AES is a compound based on PA66 resin containing Glass Fiber, Mold Release.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
SABIC Innovative Plastics NORYL N1050 PPE+HIPS (Asia Pacific) Noryl* N1050 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and good flow , this resin also uses non-chlorinated, non-brominated FR ad.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Covestro Apec® 1797 High-Heat Polycarbonate This linear, amorphous copolycarbonate is most suitable for applications that must withstand high temperatures and exhibit toughness, impact resistance and high transparency. These properties, along.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Covestro Bayblend® FR3009 PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Flame-retardant• Injec.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Covestro Bayblend® T65 HG PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Injection molding, easy .. |
|||
Surface Resistance | >= 1.00e+16 ohm | >= 1.00e+16 ohm | ROA; IEC 60093 |
Eurostar Staramide AST44 PA66, Impact Modified, Injection Molded AST44 is a Low Temperature Impact Modified Polyamide 66 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier. |
|||
Surface Resistance | >= 1.00e+16 ohm | >= 1.00e+16 ohm | IEC 60093 |
Eurostar Staramide B28N PA6, Nucleated, Injection Molded Staramide B28N is a Nucleated and Unreinforced Polyamide 6, Injection Molding ResinInformation provided by Eurostar. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Eurotec® Tecoform® PO20 NL RM POM, MoS2 modified, natural Information provided by Eurotec® |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Adamas Adalon® 991 PTFE Information provided by Adamas, HPM |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Adamas Adalon® 998 PTFE, Turquoise Information provided by Adamas, HPM |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | 50% RH; ASTM D257 |
Asahi Kasei Xyron® 140V Modified Polyphenylene Ether Flame RetardantInformation provided by Asahi Kasei |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | 50% RH; ASTM D257 |
Asahi Kasei Xyron® SZ800 Modified Polyphenylene Ether High-Heat ResistantInformation provided by Asahi Kasei |
|||
Surface Resistance | >= 1.00e+16 ohm | >= 1.00e+16 ohm | ISO 60093 |
BASF Ultramid® T 4381 LDS 10/25% Glass/Mineral Filled PA6/6T (Dry) Description: Ultramid® T 4381 LDS is a semi-crystalline, partially aromatic high temperature polyamide (PA6/6T) for laser direct structuring (LPKFLDS®). As the material is reinforced with 10% fibe.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Adamas Adalon® 451 PTFE, organic filler Information provided by Adamas, HPM |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 93 |
Azoty Tarnow™ Tarnamid® T-27 GF30 Polyamide 6 - Glass Fiber Reinforced 30% Glass fiber reinforced, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 93 |
Azoty Tarnow™ Tarnamid® T-27 GF35 Polyamide 6 - Glass Fiber Reinforced 35% Glass fiber reinforced, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Covestro Makrolon® LED2643 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• LED lighting, optics, .. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
Polyplastics Duracon® CP-15X Acetal Co-polymer (POM), Creep resistant, Creep resistant DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O).. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ROA; IEC 60093 |
SABIC Innovative Plastics NORYL RN0612 PPE+HIPS (Europe-Africa-Middle East) Noryl RN0612 is an unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin comprising at least 30% PCR styrenic series resin content. Designed for good dimen.. |
|||
Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
Adamas Adalon® 911 PTFE Information provided by Adamas, HPM |