Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Processing Temperature = 120 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Thermx® CG933 PCT, 30% Glass Reinforced  (Unverified Data**)
Thermx® CG933 is a 30% glass fiber reinforced and flame retardant polycyclohexylenedimethylene terephthalate for injection molding.30% glass reinforced, flame retardantInformation provided by Celan..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Celcon® M50 POM  (Unverified Data**)
Celcon® M50 is a extrusion and injection molding grade with an intermediate viscosity for good processability with higher toughness than general purpose grades.Standard extruders with a length to d..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Celcon® MC90-HM POM, Mineral Reinforced  (Unverified Data**)
Celcon® MC90-HM is a highly mineral filled and coupled M90 material for producing very flat and dimensionally stable parts (normal flow).Mineral coupled for reduced warpage, high modulus, moderate ..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Celcon® MR50B POM, Specialty  (Unverified Data**)
Celcon® MR50B is a specialty media resistant grade developed for improved bleach resistance and improved toughness.Improved media resistance, improved toughnessStandard reciprocating screw injectio..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Hostaform® C 9021 M POM, Tribological  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding type like C 9021, with molybdenum disulphide modifiedInformation provided by Celanese
Processing Temperature 90.0 - 120 °C
194 - 248 °F
Cavity temperature
Celanese Hostaform® M15HP POM  (Unverified Data**)
Hostaform® acetal copolymer grade M15HP is a high viscosity polymerLow flow, high strength and stiffness, improved impactInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Hostaform® M90LF POM  (Unverified Data**)
Hostaform® acetal copolymer grade M90LF is a medium viscosity polymer providing optimum performance in general purpose injection molding and extrusion of thin walled tubing and thin gauge film.Stan..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese VECTRA E135i LCP, 35% Glass Reinforced  (Unverified Data**)
35% glass fiber filled /Higher weldline strength.Information provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese VECTRA E845i LDS LCP, 40% Mineral / Glass Reinforced  (Unverified Data**)
LDS capable LCP with higher DTUL and impactLDS capable LCP with higher DTUL and impactInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese ZENITE 7755 LCP, 55% Mineral / Glass Reinforced  (Unverified Data**)
Zenite 7755 is a 55% glass/mineral-reinforced liquid crystal polymer resin for injection molding. It has good impact resistance, excellent temperature resistance, and is suitable for applications i..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Celcon® WR25Z POM, UV Resistant
Celcon« WR25Z is a 2.5 nominal melt flow rate based acetal copolymer stabilized to provide maximum ultraviolet radiation resistance in outdoor applications. Celcon« WR25Z is a lower flow product ..
Processing Temperature 90.0 - 120 °C
194 - 248 °F
Cavity temperature
Celanese Celstran® PA66-GF50-0111P10 PA666, 50% Glass Reinforced
Material code according to ISO 1043-1: PA66PA66/6 Copolymer with 50% ash contentInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® AM90S POM, Specialty
Hostaform« acetal copolymer grade AM90S is a standard melt flow acetal copolymer grade containing an antimicrobial ingredient. Hostaform« AM90S provides the same physical and mechanical performan..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® C 9021 G POM, Tribological
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® C 9021 POM, Unfilled
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® LM25 POM, Specialty
Hostaform« LM25 is a 2.5 melt flow acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform« LM25 can be lasermarked with bar-codes, identification num..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® MT8F02 POM, Medical Technology
Hostaform« acetal copolymer grade MT8F02 is a special grade developed for medical industry applications containing low residual monomers. Hostaform« MT8F02 is a standard flow high level polytetra..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese VECTRA E115i LCP, 15% Glass Reinforced
15% glass reinforcedInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese ZENITE ZE55311E LCP, Mineral Reinforced
Zenite ZE55311E is mineral filled LCP resin with improved elongation, low abrasion and smooth surface.Information provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® C 9021 TF XAP² POM, Tribological
Chemical abbreviation according to ISO 1043-1: POMIt is normally not necessary to dry HOSTAFORM. However, should there be surface moisture (condensate) on the molding compound as a result of incorre..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese THERMX CG933 PCT, 30% Glass Reinforced
Thermx« CG933 is a 30% glass fiber reinforced and flame retardant polycyclohexylenedimethylene terephthalate for injection molding.Information provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Celcon® M450 POM  (Unverified Data**)
Celcon® acetal copolymer grade M450 is an extremely low viscosity grade for optimal cycle performance in very thin walls or long, narrow flow paths in injection molding.Very high flow, fast cycling..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Celcon® M90-45H POM, UV Resistant  (Unverified Data**)
Celcon® M90-45H is an acetal copolymer which has been stabilized to give protection against property and color degradation in interior applications where UV exposure is anticipated.Formulated in cu..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
Cavity temperature
Celanese Hostaform® C 9021 POM  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMGeneral purpose injection molding gradeInformation provided by Celanese
Processing Temperature 90.0 - 120 °C
194 - 248 °F
Cavity temperature
Celanese Hostaform® CP15X POM  (Unverified Data**)
Preliminary Data Sheetcreep resistant, high viscosity acetal copolymerInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® C 9021 AW POM, Tribological
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese Hostaform® MT12U01 POM, Medical Technology
Hostaform« MT12U01 is a special grade developed for medical industry applications containing low residual monomers and no animal products. Hostaform« MT12U01 is a moderately high flow grade for fa..
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese VECTRA A950 LCP, Unfilled
Unreinforced Vectra grade suitable for extrusion.Information provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese VECTRA E830iPd LCP, 30% Specialty
30% glass filled Platable grade.Information provided by Celanese
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
Celanese VECTRA S475 LCP, 32% Mineral / Glass Reinforced
Super High Flow, High heat Resistance and Low Warp for Thin Parts.Information provided by Celanese
Copyright © lookpolymers.com All Rights Reserved