Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended |
Nye Lubricants 880 (FG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended use; SAE J-2236 |
Rogers Corporation Bisco™ HT-800 Cellular Silicone Foam Medium grade silicon sponge. UL recognized for flame retardance and gasketing.Applications: HID (High Intensity Discharge) lighting fixture gaskets, Battery cushion in hand-held electronic products.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended use; SAE J-2236 |
Rogers Corporation Bisco™ HT-840 Cellular Silicone Foam Extra firm grade silicone sponge. UL recognized of flame retardance.Applications: High closure-force gaskets, Press-pads where conformable imprinting support is required, such as decal lamination o.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | short period, no load |
Omnia Plastica PEI Polyetherimide This high performance engineering plastic is a non-reinforced self-extinguishing amorphous polymer with high thermal, electrical and mechanical properties which are typical of a crystalline polymer... |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Precision Polymer Engineering V60F Fluoroelastomer Compound Peroxide/Litharge cured, Fluoroelastomer Rubber, 55-65 °IRHD. Tetrapolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene and cure site monomer (CSM). To meet ASTM D2000 line c.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Precision Polymer Engineering V75A Fluoroelastomer Compound Signal Blue, Fluoroelastomer Rubber, 70 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Diesel liner ring grade.Applications: Excellent resistance to oils, fuels and hydraulic flu.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | rated per UL card E54153 |
Arlon 518581R018 0.018" (0.457 mm) Uncured Silicone Rubber with Fiberglass Substrate
(discontinued **)&l Design/Construction:Side 1: Uncured Silicone RubberSide 2: Uncured Silicone RubberAppearance: Red silicone gum on fiberglass clothThis data Represents typical values for the production material. The.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | UL Temperature Index 200 / 220 per UL746B |
Solvay Specialty Polymers Ryton® R-4 Polyphenylene Sulfide Compound
(Unverified Data**) Natural Color Polyphenylene Sulfide CompoundRyton® R-4 is a 40% fiberglass reinforced polyphenylene sulfide compound which provides outstanding chemical resistance and mechanical properties even at.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Freudenberg Simrit V158 Fluoroelastomer Self-Lube Additives to elastomer compounds can improve the lubricity or non-stick performance of a seal. Specific compound ingredients may include fluoropolymer (TEFLON) additives, silicone additives or molyb.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Freudenberg Simrit V177 Fluoroelastomer Self-Lube Additives to elastomer compounds can improve the lubricity or non-stick performance of a seal. Specific compound ingredients may include fluoropolymer (TEFLON) additives, silicone additives or molyb.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Freudenberg Simrit V195 Non-Black Compound Specific compounding ingredients can reduce or eliminate the presence of carbon black. These compounds may provide improved resistance to oxidative environments and reactive plasmas. The inorganic p.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Short peaks operation |
Polyram PlusTek PA350M4 Nylon 6.6 for Injection Molding, 20% Mineral Reinforced 20% Mineral Reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Heat Resistance; ASTM D570D |
Plenco 7523 Phenolic, Granular, Transfer Molded PLENCO 07523 is a woodflour and cotton flock filled novolac phenolic molding compound, formulated for high impact industrial uses. UL recognized under component file E40654.Information supplied by P.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Dow Corning SE 4447 CV KIT Two-part liquid silicone elastomer designed for applications requiring very high thermal conductivity and electrical insulation.Information provided by Dow Corning |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Intermittent |
Epoxy Technology EPO-TEK® 305 Spectrally Transparent Epoxy Product Description: EPO-TEK® 305 is a two component, semi-rigid, optical grade epoxy for semiconductor packaging of fiber optics, optoelectronics and medical devices. It is an electrically and th.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Continuous |
Epoxy Technology EPO-TEK® E3037 Epoxy Material Description: A single component, electrically conductive, thixotropic silver-filled epoxy for die-attach and SMD-attach inside hybrid microelectronics.Information Provided by Epoxy Technolo.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Continuous |
Epoxy Technology EPO-TEK® OG142 UV Cure Optical Epoxy Material Description: A single component, UV curable epoxy, designed for adhesive, sealing, and encapsulating applications found in semiconductor, electro-optics, fiber optics, medical, and scientif.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Dow Corning 200® 0.65 CST FLUID Volatile siloxane fluid (hexamethyldisiloxane).Information provided by Dow Corning |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | rated per UL card E54153 |
Arlon 32580R025 0.025" (0.635 mm) Uncured Unsupported Silicone Rubber on PET Carrier Design/Construction:Side 1: Uncured Unsupported Silicone Rubber on PET CarrierAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The data s.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
BASF Ultramid® B3UG4 BK 23215 20% Glass Filled PA66 FR (Conditioned) Description: Halogen-free and phosphorus free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire.. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended |
Nye Lubricants 762G (NG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Dow Corning XIAMETER® PMCPPMX-200 10CS Silicone Fluid Is chemically equivalent to DOW CORNING® 200 FLUID 10CS. 100% active, 10 cSt, polydimethylsiloxane polymer.Information provided by Dow Corning |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
Epoxyset Epoxibond EB-177 Unfilled Epoxy Adhesive A two-component, unfilled, high temperature epoxy adhesive used for bonding and small potting applications in the medical, electronics, and aerospace industries.Information provided by Epoxyset Inc... |
|||
Maximum Service Temperature, Air | 200 °C | 392 °F | |
BASF Ultramid® B3WG10 BK 00564 50% Glass Filled PA6 (Dry) Description: 50% glass-fiber reinforced and heat aging resistant injection-molding grade for technical parts with very high stiffness.Information provided by BASF |
|||
Maximum Service Temperature, Air | >= 200 °C | >= 392 °F | Short peaks operation |
Polyram PlusTek RA320G6 Nylon 6.6, 30% Glass Fiber, Flame Retardant 30% glass fiber reinforced, flame retardant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |