Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 76.7 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1001-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural
Applications: Facias, claddings, and rocker panelsBodyside moldingsStep pads and bumper componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1001-74 Thermoplastic Polyolefin, Non-UV Stabilized, DX9 Black
Applications: Scuff platesBodyside moldingsStep and hitch padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1004-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1004-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1004-625UV Thermoplastic Polyolefin, UV Stabilized, Interior DX9 Black
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1055-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural
Applications: Bumper coversInterior trimSplash shieldsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1055-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black
Applications: Bumper coversInterior trimSplash shieldsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT1055-624 Thermoplastic Polyolefin, Non-UV Stabilized, General Purpose Light Grey
Applications: Bumper coversInterior trimSplash shieldsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT2600-01UV Thermoplastic Polyolefin, UV Stabilized, Black
Applications: Interior trimSplash shieldsStep pads and hitch padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT2600-677UV Thermoplastic Polyolefin, UV Stabilized, 0848 Black
Applications: Exterior trimStep pads and hitch padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT2700-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural
Applications: Air deflectorsFuel filler shieldsUnderhood componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT2700-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black
Applications: Air deflectorsFuel filler shieldsUnderhood componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural
Applications: Step padsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-47UV Thermoplastic Polyolefin, UV Stabilized, AYNA Light Prairie Tan
Applications: Step padsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-50 Thermoplastic Polyolefin, UV Stabilized, YGYA Black
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-640UV Thermoplastic Polyolefin, UV Stabilized, BFQA Arizona Beige
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-727UV Thermoplastic Polyolefin, UV Stabilized, G01 Black
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-729UV Thermoplastic Polyolefin, UV Stabilized, AG-64 Grey
Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-757UV Thermoplastic Polyolefin, UV Stabilized, Pueblo Gold
Applications: Step padsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products FT3080-81 Thermoplastic Polyolefin, UV Stabilized, ACRA Titanium
Applications: Step padsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
RheTech Products UVFT3082-74 Thermoplastic Polyolefin, 135K Flexural Modulus, UV Stabilized, Exterior DX9 Black
Applications: Step padsHitch padsExterior trimInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Fiberfil® PP-61/TC/20/UV Polypropylene Copolymer, 20% Talc, UV Stabilized
Information provided by FIBERFIL Engineered Plastics
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Ecomass® 3608TU96 Tungsten Filled Polyethylene
Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applicationsHigh Specific GravityTungsten Powder Filled Polyethylene (HDPE)Information provided by Technical Polymers
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Ecomass® 3620BX18 5% Borated Polyethylene (HDPE)
5% Borated Polyethylene (HDPE), Product Form - Pellets, No Pre-Drying RequiredProcessing Method: Injection Molding, Compression MoldingNeutron Shielding ApplicationsInformation provided by Technica..
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Ecomass® 3620BX60 18% Borated Polyethylene (HDPE)
18% Borated Polyethylene (HDPE), Product Form - Pellets, No Pre-Drying RequiredProcessing Method: Injection Molding, Compression MoldingNeutron Shielding ApplicationsInformation provided by Technic..
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Clariant Renol PPT20BN-346 Polypropylene Copolymer, Talc Filled
Data provided by Clariant Masterbatches
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Aaron Industries AAROLENE® ARPE HD 300-2 Black BM High Density Polyethylene, Blow Molding
AAROLENE® ARPE 300 Series Polyethylene Compounded Resin, HDPE Black, Blow Molding GradeFeatures: A high density Polyethylene compound, pre-colored black, specifically designed for all blow molding..
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Aaron Industries AAROLENE® ARPE HD 300-2 Black Crate High Density Polyethylene Compounded Resin, Crate Grade
AAROLENE® ARPE 300 Series Polyethylene Compounded Resin HDPE, Black Crate GradeFeatures: A high density Polyethylene compound, pre-colored black, specifically designed for all crate applications.
Deflection Temperature at 0.46 MPa (66 psi) 76.7 °C
170 °F
ASTM D648
Polymer Resources PPX-SF1 Modified PPO, Structural Foam Grade, Easy Flow  (Unverified Data**)
Process: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Foam grades tested with foamed parts with a 10% weight reduction rel..
Copyright © lookpolymers.com All Rights Reserved