Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melting Point = 150 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 51 C 20 PP, 20% mineral filling
FeaturesModified homopolymer and copolymer PP for injection moulding with the contenct of 20% microground, chemically modified talc. Increased strength, rigidity and thermal application up to 100°C..
Melting Point 150 °C
302 °F
STN EN 11357-1
Plastcom SLOVALEN PC 51 C 40 LS/1M Polypropylene reinforced with mineral filler, UV stabilized
Modified copolymer PP for injection molding with the content of 40% mineral filler, UV stabilized. Product meets glow wire test at 750°C. Delivered in full RAL color scale.Information Provided by P..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 51 T 25 PP, 25% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 25% microground, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 51 T 40 PP, 40% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 40% microground, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 81 T 15 PP, 15% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 15% micronized, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitur..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 82 T 30 PP, 30% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 30% micronized, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitur..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PH 91 N PP, basic type
FeaturesCompounded homopolymer PP. General use in all industry branches. Packing material, garden flower-pots, toys, furniture industry, guides, dowels, clamps, office chairs, holders etc. Delivered..
Melting Point 150 - 160 °C
302 - 320 °F
ASTM D3418
NatureWorks® Ingeo™ 6751D Fiber Grade PLA
NatureWorks® PLA polymer 6751D is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6751D is designed for extrusion into mechanically ..
Melting Point 150 °C
302 °F
DSC second heating; ASTM D3418
Reliance Industries Repol R110MK Polypropylene
REPOL Polypropylene R110MK is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly..
Melting Point 150 °C
302 °F
DSC; STN EN ISO 3146
Plastcom SLOVALEN PC 53 N Polypropylene Copolymer, UV Stabilization
FeaturesModified copolymer PP for injection moulding, with the ability of modeling the melt flow rate within the interval 5 - 20 g/10 min. Can be used for simple small as well as for large complica..
Melting Point 150 °C
302 °F
Flow temperature, ASTM D569
Rotuba MH Cellulose Acetate
Property values at 50% RH.Data provided by the manufacturer.
Melting Point 150 - 160 °C
302 - 320 °F
ASTM D3418
NatureWorks® Ingeo™ 6752D Spunbond Grade Biopolymer
Sheath polymer for spunbound uses. NatureWorks® PLA polymer 6752D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin de-rived from annually renewable resources. Available in pellet f..
Melting Point 150 - 182 °C
302 - 360 °F
Average value: 164 °C Grade Count:5
Overview of materials for Polypropylene with 40% Calcium Carbonate (CaCO3) Filler
This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 40% Calcium Carbonate (CaCO3) Filler". Specific grades with primary filler content be..
Melting Point 150 - 170 °C
302 - 338 °F
Huntsman/TMA
Huntsman IROGRAN® A 85 P 4394 TPU-Polyether
Introduction: IROGRAN A 85 P 4394 is a high performance polyether based thermoplastic polyurethane intended for extrusion and injection molding applications. IROGRAN A 85 P 4394 is part of the HUNTS..
Melting Point 150 - 160 °C
302 - 320 °F
Kofler; MQSA 70 A
Lubrizol Advanced Materials Pearlbond® DAP 750/2 Thermoplastic Polyurethane
The Pearlbond® grades are aromatic crystalline TPUs used for the production of heat activated shoe counters and toe puffs, and orthopedic products. The Pearlbond® grades are supplied in pelle..
Melting Point 150 - 300 °C
302 - 572 °F
Johnson Matthey JM No2S Soft Solder Flux
A liquid non-corrosive flux for use on copper and brass. The residues are water soluble and non-corrosive, however it is recommended they are removed to prevent any possibility of contamination aft..
Melting Point 150 - 160 °C
302 - 320 °F
MQSA 111
Lubrizol Advanced Materials PEARLCOAT® 168K Thermoplastic Polyurethane Elastomer
PEARLCOAT® 168K is a polyether-based TPU, supplied in form of translucent, colorless pellets, offering adequate hardness, excellent low-temperature flexibility and very good hydrolysis resistance..
Melting Point 150 °C
302 °F
ASTM D2117
SCG Chemicals EL-Proâ„¢ P851JO Polypropylene Injection Molding
Key Characteristics:Good processabilityHigh gloss and brightnessOdorlessSafe for food contactRecommended Applications:Clear food containerClear large size containerThin wall productsInformation prov..
Melting Point 150 °C
302 °F
ASTM D2117
SCG Chemicals EL-Proâ„¢ P852J Polypropylene Injection Molding
Key Characteristics:Excellent productivityHigh clarityHigh stiffnessRecommended Applications:Clear food containerClear large size containerHousehold products and other articles that require high tra..
Melting Point 150 °C
302 °F
Kofler
Lubrizol Estane® MVT 70AT3 Thermoplastic Polyurethane, Moisture Vapor Transmission
Type: Estane® MVT 70AT3 is an aromatic polyether-based thermoplastic polyurethane (TPU).Features: High moisture vapor transmission with low water swell. Excellent low temperature properties and el..
Melting Point 150 - 160 °C
302 - 320 °F
DSC
EMS-Griltech Griltex® D 1377E Copolyester Hotmelt Adhesive (Technical Applications)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
Melting Point 150 °C
302 °F
10°C/min; ISO 11357-1/-3
DuPont Performance Polymers Hytrel® PC945 NC010 Polyester Elastomer TPC-ET  (Unverified Data**)
40 Shore D High Performance Polyester Elastomer Developed for the Healthcare IndustryInformation provided by DuPont Performance Polymers
Melting Point 150 °C
302 °F
(Dry)
Arkema Group Rilsan® 6733 Nylon 11, Flexible Tubing Grade (Conditioned)
Designation ISO 1874-PA11/xx,E,18-002Transparent and flexible copolymer for tubes extrusion. Additive free.High flexibility. Very good transparency. High chemical resistance.USP XXIII class VI appro..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 91 T 30 PP, 30% mineral filling
FeaturesModified copolymer PP for injection moulding with the content of 30% microground, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu..
Melting Point 150 °C
302 °F
DSC; STN EN ISO 3146
Plastcom SLOVALEN PH 81 C 40 Polypropylene Homopolymer and Copolymer, 40% Micronized Talc
FeaturesModified homopolymer and copolymer PP for injection moulding with the content of 40% micronized, chemically modified talc. Increased strength, rigidity and thermal application up to 130°C...
Melting Point 150 °C
302 °F
BASF Novolen® 3248 RC Polypropylene
Grade containing nucleating and antistatic agents for injection molded parts.Data was collected by ISO methods and provided by BASF.
Melting Point 150 °C
302 °F
DSC; ASTM D3418
DuPont Bynel® 50E662 Adhesive Resin  (discontinued **)
Bynel® Series 5000 resins are anhydride-modified polypropylene. Bynel® 50E662 are based on polypropylene random copolymers. They are available in pellet form for use in conventional extrusion an..
Melting Point 150 - 170 °C
302 - 338 °F
Average value: 164 °C Grade Count:14
Overview of materials for Polypropylene Glass Bead Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene Glass Bead Filled". Each property range of values reported is minimum and maximum values o..
Melting Point 150 - 160 °C
302 - 320 °F
Kofler; MQSA 70 A
Lubrizol Advanced Materials Pearlbond® 118 Thermoplastic Polyurethane
The Pearlbond® grades are aromatic crystalline TPUs used for the production of heat activated shoe counters and toe puffs, and orthopedic products. The Pearlbond® grades are supplied in pellet fo..
Melting Point 150 °C
302 °F
Plastcom SLOVALEN PC 92 T 40 PP, 40% mineral filling
FeaturesModified homopolymer and copolymer PP for injection moulding with the contenct of 40% microground, chemically modified talc. Increased strength, rigidity and thermal application up to 100°C..
Copyright © lookpolymers.com All Rights Reserved