Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Yield Strength | 53.9 MPa @Thickness 3.20 mm |
7820 psi @Thickness 0.126 in |
15mm/min; ASTM D790 |
LG Chemical ALPHALAC SG970 HIPS Description: Injection Molding, General Purpose, Good Processability, High glossApplication: Air Conditioner Panel, Washer CoverCAS No. 9003-55-8Information provided by LG Chemical |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 3.20 mm |
7820 psi @Thickness 0.126 in |
15 mm/min; ASTM D790 |
LG Chemical HI110 ABS, High Impact, Chemical Resistance Feature: Injection Molding, High Impact, Chemical ResistanceApplication: Edge of Furniture ApplicationsCAS No. 9003-56-9Information provided by LG Chemical |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 3.20 mm |
7820 psi @Thickness 0.126 in |
15mm/min; ASTM D790 |
LG Chemical HIPS MI770 PS, Impact Modified Description: Injection Molding, PS, Impact Modified, High GlossApplication: Electric/Electronic Components, Stationary Articles, Food Containers, etc.CAS: 9003-55-8Information provided by LG Chemica.. |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 3.20 mm |
7820 psi @Thickness 0.126 in |
1.3mm/min; ASTM D790 |
LG Chemical LUCEL HI520 POM+Rubber, High Impact Feature: Injection Molding, POM+Rubber, High ImpactApplication: GearsCAS No. 66455-31-0 and 155123-66-3Information provided by LG Chemical |
|||
Flexural Yield Strength | 53.9 MPa | 7820 psi | DIN 53455; ASTM D790 |
Kolon KOLEFIN® KO133MT20 M/F Reinforced Polypropylene KOLEFIN® has excellent mechanical properties and its cost is lower than other engineering plastics. KOLEFIN® is widely used in the automotive industry and business applications.Good mechanica.. |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 3.20 mm |
7820 psi @Thickness 0.126 in |
15 mm/min; ASTM D790 |
LG Chemical SH625 ABS, High Impact, High Flow Feature: Extrusion Molding, High Impact, High FlowApplication: Ski Flat, MiscellaneousCAS No. 9003-56-9Information provided by LG Chemical |
|||
Flexural Yield Strength | 53.9 MPa | 7820 psi | ASTM D790 |
IRPC Polimaxx Polene 111JX TA8 Polypropylene Compound CHARACTERISTICS: POLYPROPYLENE HOMOPOLYMER WITH 40% TALCUM REINFORCED HIGH STIFFNESSAPPLICATIONS: INJECTION MOLDING FOR AUTOPARTS, ELECTRICAL APPLIANCES |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 3.20 mm |
7820 psi @Thickness 0.126 in |
15mm/min; ASTM D790 |
LG Chemical ALPHALAC SG970NSU HIPS Description: Injection Molding, General Purpose, Good Processability, High gloss, antistatic and UV stabilizedApplication: Air Conditioner Panel, Washer CoverCAS No. 9003-55-8Information provided by.. |
|||
Flexural Yield Strength | 53.9 MPa | 7820 psi | ASTM D790 |
Cheng Yu Plastic PP227 Flame Retardant Polypropylene, Medium Impact |
|||
Flexural Yield Strength | 53.9 MPa | 7820 psi | ASTM D790 |
Cheng Yu Plastic PP229H TALC 20 Polypropylene, 20% Talc, High Heat |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 6.40 mm |
7820 psi @Thickness 0.252 in |
ASTM D-790 |
Bhansali Engineering Abstron AN-312 Flame Retardant ABS Grade |
|||
Flexural Yield Strength | 53.9 MPa | 7820 psi | ASTM D790 |
Cheng Yu Plastic BK1022 Electric Conducting Polypropylene, Injection |
|||
Flexural Yield Strength | 53.9 MPa @Thickness 6.40 mm |
7820 psi @Thickness 0.252 in |
ASTM D-790 |
Bhansali Engineering Abstron AN-312 Flame Retardant ABS Grade |