Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
NYCOA 5033 HST 33% Glass-Fiber Reinforced, Heat Stabilized, Translucent Nylon 66 Resin NYCOA 5033 HST is a 33% glass fiber reinforced, heat stabilized, translucent Nylon 66 resin used for injection molding. It has been specifically formulated for see through storage tanks for automoti.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Omni Plastics OmniLon™ 6/6 PA6/6 GR43 Glass Reinforced Nylon Applications: Structural and appearance parts across industry segments including automotive, heavy truck fans, appliances, furniture, lawn and garden.Information provided by Omni Plastics |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Polymer Resources NY66-G43 Nylon 66, 43% Glass Reinforced Nylon 66, 43% Glass Reinforced, LubricatedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are test.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Polymer Resources NY66-G43-[color]H Nylon, 43% Glass Reinforced, Heat Stabilized (DAM) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are tested dry as molded (DAM).Information provide.. |
|||
Tensile Strength, Yield | 200 - 380 MPa | 29000 - 55100 psi | |
Materion Beryllium Copper Alloy 25 Strip; A -Planished (TB00) Temper (UNS C17200) Treatment required for max strength: as suppliedFormability Ratio, 90° Bend, Radius/Thickness (Good Way): 0Formability Ratio (bad Way): 0Superficial Hardness: 30T 46-67Tabulated properties apply .. |
|||
Tensile Strength, Yield | 200 MPa @Strain 0.200 %, Temperature 760 °C |
29000 psi @Strain 0.200 %, Temperature 1400 °F |
|
Haynes Hastelloy® C-22® alloy, 12.7-50.8 mm thick bar, solution heat treated HASTELLOY® C-22® alloy is a nickel-chromium-molybdenum-tungsten alloy with excellent overall corrosion resistance compared to other Ni-Cr-Mo alloys, including HASTELLOY C-276 and C-4 alloys an.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ISO 527-2 |
Solvay Specialty Polymers Ixef® 1622 Polyarylamide (PARA), 50% Glass Fiber (Conditioned) Ixef® 1622 is an impact modified, 50% glass-fiber reinforced polyarylamide. which exhibits very high strength and rigidity, outstanding surface gloss, and excellent impact resistance.Features: Go.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Techmer ES HiFill® PA6 GF43 LE BK 43% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 43% Filler by WeightAdditive: Lubricant and Heat StabilizerFeatures: Lubricated, Heat Stabilized and Low Ext.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Techmer ES HiFill® PA6 GF50 IM L NAT001 50% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 50% Filler by WeightAdditive: Lubricant and Impact ModifierFeatures: Lubricated and Impact ModifiedProcessin.. |
|||
Tensile Strength, Yield | <= 200 MPa @Strain 0.200 %, Thickness <=0.700 mm |
<= 29000 psi @Strain 0.200 %, Thickness <=0.0276 in |
20 MPa higher apply |
SSAB Tunnplat Aluzink F40A Metal-coated Mild Steel Metal-coated Mild SteelComments: Aluzink - Aluminum-zinc coated sheet. Property values are for thicknesses 0.4 - 2.00 mm. Iron content is approximate - exact composition is not reported by the manu.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Techmer ES Luriblend® PA6 GF40 ML5 HS 12 mm 40% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber, 40% Filler by WeightAdditive: Heat Stabilized and Molybdenum Disulfide LubricantFeatures: Lubricated and Heat StabilizerAp.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP IC006 PA 6/12 (Asia Pacific) LNP* Thermocomp* IC006 is a compound based on Nylon 6/12 resin containing Carbon Fiber. Added features of this material include: Electrically Conductive. |
|||
Tensile Strength, Yield | >= 200 MPa | >= 29000 psi | Recommendation only |
SSAB Tunnplat Domex® 200 Cold-forming Steel Cold-forming SteelCharacteristics: Domex® is specifically intended for deep-drawing operations. Due to its close tolerances and fine surfaces, hot-rolled Domex 200 can replace cold reduced deep-.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Westlake Plastics Tempalux® CN-F Polyetherimide (conductive) Non-sloughing carbon-fiber filled material which is extremely strong and stiff, has excellent dimensional stability, and high temperature resistance to 415F. This material has broad chemical resist.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ISO 527 |
Eurostar Star L PA66 30Y D61 PA66, Carbon Fiber Filled, Injection Molded Star L PA66 30Y D51 is a PTFE/Silicone Oil Lubricated, Carbon Fiber Reinforced, Polyamide 66 Injection Molding ResinInformation provided by Eurostar. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Clariant Renol PA211G50 Nylon 6, 50% Glass Fiber, Lubricated Data provided by Clariant Masterbatches |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
E-Polymers TEKAMID® TB120G45 , 45% Glass Fiber Reinforced PA6, DAM 45% Glass Fiber Reinforced, High Strength.Information provided by E-Polymers Co. Ltd. |
|||
Tensile Strength, Yield | 200 MPa @Strain 0.200 %, Temperature 427 °C |
29000 psi @Strain 0.200 %, Temperature 801 °F |
|
Carpenter 20-Mo6® Stainless Steel, Tensile Properties at 93°C Data provided by Carpenter Technology Corporation.This is an austenitic stainless steel which is resistant to corrosion in hot chloride environments with low pH. It has good resistance to pitting, .. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® KR 4355 G7 35% Glass Filled PA6/6T (Conditioned) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® KR 4355 G7 BK 00564 35% Glass Filled PA6/6T (Conditioned) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r.. |
|||
Tensile Strength, Yield | 200 - 330 MPa | 29000 - 47900 psi | |
ArcelorMittal 13 High formability steel for drawing, Hot rolled Available in the following: uncoated (DD13) Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used extensively in the au.. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | |
AK Steel ZINCGRIP® Hot Dip Galvanized Carbon Steel, Bake Hardenable (BH 210) Information provided by AK Steel |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | |
AK Steel ZINCGRIP® Hot Dip Galvanized Carbon Steel, Dent Resistant (DR 210) Information provided by AK Steel |
|||
Tensile Strength, Yield | 200 MPa @Strain 0.200 % |
29000 psi @Strain 0.200 % |
Typical; Annealed at 2100°F (1149°C) |
ATI Allegheny Ludlum AL 800AT™ Nickel-Base Alloy, UNS N08811 AL 800AT alloy is nickel-iron-chromium alloys designed to resist oxidation and carburization at elevated temperatures. The nickel content makes the alloy highly resistant both to chloride stress-co.. |
|||
Tensile Strength, Yield | 200 MPa @Strain 0.200 % |
29000 psi @Strain 0.200 % |
Typical; Annealed at 2100°F (1149°C) |
ATI Allegheny Ludlum AL 800H™ Nickel-Base Alloy, UNS N08810 AL 800H alloy is nickel-iron-chromium alloys designed to resist oxidation and carburization at elevated temperatures. The nickel content makes the alloy highly resistant both to chloride stress-cor.. |
|||
Tensile Strength, Yield | 200 - 330 MPa | 29000 - 47900 psi | |
ArcelorMittal 12 High formability steel for drawing, Hot rolled Available in the following: uncoated (DD12) Description: This range of non-alloyed mild steels is designed for deep and extra deep drawing applications. These products are used extensively in the au.. |
|||
Tensile Strength, Yield | >= 200 MPa | >= 29000 psi | Guaranteed Minimum L-T Direction; 0.2% Offset |
Aleris HOGAL 5558 Aluminum 5026 H14/H34 HOGAL 5558 is produced according to EN AW-5026.Information provided by Aleris. |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Asahi Kasei Thermylon® LSG-440A 60% Ceramic and Glass Fiber Reinforced Information provided by Asahi Thermofil |
|||
Tensile Strength, Yield | 200 MPa | 29000 psi | ASTM D638 |
Asahi Kasei Thermylon® NSG-240A-2H 50% Ceramic and Glass Fiber Reinforced Information provided by Asahi Thermofil |