Polymer Property : Tensile Strength, Yield = 17.2 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	17.2 MPa	2490 psi	Type I, 51 mm/min; ASTM D638
PolyOne Maxxam™ PPC-40C Nat Polypropylene Copolymer (PP Copolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
Tensile Strength, Yield	17.2 MPa	2490 psi	Type I, 51 mm/min; ASTM D638
PolyOne Maxxam™ XN-418.G001-1000 Polypropylene Copolymer (PP Copolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
Tensile Strength, Yield	17.2 MPa	2490 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Syncure™ System S110FV Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable compounds, is a UL bulletinized high strength, highly flame retardant insulation compound. Available in a RoHS complaint version.NOTE: The above..
Tensile Strength, Yield	>= 17.2 MPa	>= 2500 psi	ASTM D638
S&E Specialty Polymers GPP6025 PP Application: Specially engineered, low bloom, low specific gravity, flame retardant polypropylene compound designed with halogen based technology. Exhibits a unique balance of high flexural modulus ..
Tensile Strength, Yield	17.2 MPa	2500 psi	TM R050-36
Resinlab® EP1325 Thixotropic, Heat Curing Epoxy Adhesive Resinlab™ EP1325 and EP1325LV are one part thixotropic, heat curing epoxy adhesives. They can also be used as a small mass potting compounds, staking or damming adhesives, or polymer systems where ..
Tensile Strength, Yield	17.2 MPa	2500 psi	TM R050-36
Resinlab® EP950NMF Gray Non-Metallic Filled Rubber Modified Epoxy Resinlab™ EP950NMF Gray is a non-metallic filled version of EP950G. It is a one-part rubber modified epoxy designed for bonding metal and other structural material subject to stress at elevated tem..
Tensile Strength, Yield	17.2 MPa	2490 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman M3019-P Polyethylene (discontinued **) M3019-P is suggested for applications such as spiral-wound can linings, release paper, and photographic paper. M3019-P Has been found to exhibit good barrier properties, temperature resistance, and..
Tensile Strength, Yield	17.2 MPa	2490 psi	ASTM D638
Eastman Tenite Butyrate 513E3720008 Clear, Trsp Cellulose Acetate Butyrate (discontinued **) Plasticizer 23%. Weight loss on heating = 1.2% per ASTM D 707. Soluble matter loss = 0.1% per ASTM D 570.Product Description: TENITE cellulosic plastics are noted for their excellent balance of p..
Tensile Strength, Yield	17.2 MPa	2490 psi	ASTM D638
Albis Plastics Cellulose Acetate Butyrate B9024 (UVI, Odor Mask Added), 16% Plasticizer (discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D412
Teknor Apex APEXÂ® 3310-85 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, RadiationUses-Automotive Applications, Food Service Applications, General Purpose, Med..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D638
Techmer ES HiFillÂ® TPU 0780 Availability: North AmericaForms: PelletsFeatures: High DensityInformation provided by TP Composites, Inc.
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 503 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D638
A. Schulman POLYTROPE™ TPP 1008-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 1008-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics ..
Tensile Strength, Yield	17.2 MPa	2500 psi	ISO 527-1/2
CTC X-PRO CTC PP 2025 Polypropylene Impact Copolymer X-PRO PP 2025 is an impact, polypropylene copolymer. It has applications in general purpose industrial, housewares, and construction.Data provided by Composite Technologies (CTC).
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D638
ExxonMobil LLDPE LL 8446.21 Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 8446 is a linear low density butane copolymer designed to offer excellent processability, whiteness, and fast grinding rate. This UV stabilized resin is ideally suited for ap..
Tensile Strength, Yield	17.2 MPa	2500 psi	2.0 in/min; ASTM D638
ExxonMobil LLDPE LLP 8555.24 Linear Low Density Polyethylene Resin Product Description: LL 8555 is a linear low density hexene copolymer designed to offer superior processability, excellent dimensional control, whiteness and low warpage. This resin is ideally suite..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 02540 Plenum Flexible PVC Non-lead stabilized Category 3 plenum jacket.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 13871 Wire & Cable Flexible PVC Non-lead stabilized, 720 hour sunlight resistant insulation compound recommended for TW and 75C Class 43 applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 20..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 14820 Wire & Cable Flexible PVC Non-lead stabilized drop cable jacketing. Also suitable for 80C rated general purpose jacket applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 17883 Wire & Cable Flexible PVC UV resistant, 90C insulation compound with good low temperature properties.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 22830 Coax & Telecom/Moldings & Extrusions Flexible PVC Non-lead stabilized, 75C rated jacketing compound suitable for CATV, CM, CL2 type applications. UL recognized for 94 V-0 in all colors at 1.5 mm. QMFZ2 recognized component.Information provided by..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 69148 Wire & Cable Flexible PVC Non-lead stabilized tray cable jacket. UL recognized for 720 hour sunlight resistance in all colors.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 19802 Wire & Cable Flexible PVC Clear, 105°C rated extrusion compound recommended for 1/32" wall jacketing. Also well suited for injection molding applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corpo..
Tensile Strength, Yield	17.2 MPa	2500 psi	ASTM D-638
Axiall 2258 Wire & Cable Flexible PVC TW insulation suitable for 105°C AWM applications. UL recognized for TW, Oil resistant I and VW-1.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Tensile Strength, Yield	17.2 MPa	2490 psi	Type IV, 510 mm/min; ASTM D638
PolyOne Geon™ Vinyl Wire & Cable W1201 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide..
Tensile Strength, Yield	17.2 MPa	2500 psi	TM R050-36
Resinlab® EP1026HP Epoxy Adhesive Resinlab™ EP1026HP is a high performance fast setting epoxy adhesive designed for bonding metals, ceramics, glass and most plastics. This product gives good resistance to water salt spray, inorgan..
Tensile Strength, Yield	17.2 MPa	2490 psi	ASTM D638
Albis Plastics Cellulose Acetate Butyrate B9004 (Odor Mask Added), 16% Plasticizer (discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T..
Tensile Strength, Yield	17.2 MPa	2500 psi	Longitudinal
Saint-Gobain Norton® Fluorglas® Chemfilm® R128/R129 Premium Grade Extruded Full Density PTFE Film (0.002" thick) Description: Full Density Unsintered Tape is used as primary insulation for high-temperature wires, jackets and cables and wall for convoluted hose. It meets the requirements of component insulation..