Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ISO 527-3 |
Polimeri Europa Clearflex® CH D0 Very Low Density Polyethylene Clearflex CH D0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The film has a high stretchability and an optimum cling effect.Main Applications:.. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
NOVA Chemicals Sclair® 12J1 Octene LLDPE Film Resin
(discontinued **) Film Properties. Features: Low gel, high clarity.Applications: Overwrap, lamination.Data provided by the manufacturer. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
ExxonMobil Escorene® LL-1042 LLDPE Packaging Film Resin, Clarity
(discontinued **) Data provided by the manufacturer, Exxon Chemical.An LLDPE blown clarity film resin. Films made from LL-1042 have very good tensile properties and toughness in addition to good clarity The good st.. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
Iran Petrochemical (PCC) 12XF6 Linear Low Density Polyethylene 12XF6 is a high performance LLDPE (HP-LLDPE) blown film grade for high film strength applications.Information provided by Iran Petrochemical Commercial Co. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
Iran Petrochemical (PCC) 235F7 Linear Low Density Polyethylene 235F7 is a LLDPE blown film grade designed for general purpose film application. This resin is particularly suited for blending with LDPE, giving better strength and downgauging possibility.Informat.. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
Chevron Phillips MarFlex® 7120X Hexene Linear Low Density Polyethylene, Blown and Cast Film This LLDPE is tailored for cast film applications that require:Good stiffness at thin gaugesGood drawdownExcellent processabilityCan be used singly or in blends with LDPE or HDPEAvailable with slip .. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | Cast Film at 1.25 mil; ASTM D-882 |
Chevron Phillips MarFlex® 7120X Polyethylene; LLDPE Hexene linear low density polyethylene. This LLDPE is tailored for applications that require: Good stiffness at thin gaugesGood drawdownExcellent processabilityCan use straight or in blends with L.. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
NOVA Chemicals Surpass® FPs117-D Octene sLLDPE Film Resin
(discontinued **) Applications: Lamination Film, coextruded sealant layer, high toughness filmInformation provided by Nova Chemicals |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
NOVA Chemicals Sclair® 11G1 LLDPE Film Resin
(discontinued **) Low gel, Excellent seal characteristics, Easy processabilityApplications: Premium shrink film, Co-extrusionAdditives: Process stabilizer, Polymer process aidFilm properties are typical of blown film.. |
|||
Film Tensile Strength at Break, MD | 43.0 MPa | 6240 psi | ASTM D882 |
NOVA Chemicals Sclair® 11N1 PE Film Resin
(discontinued **) Low gel, Excellent seal characteristics, Easy processabilityApplications: Premium shrink film, Co-extrusionFilm properties are typical of blown film extruded at a blowup ratio of 2.5:1, but are depe.. |