Polymer Property : Tensile Strength, Yield = 38400 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	265 MPa @Strain 1.00 %, Temperature 100 °C	38400 psi @Strain 1.00 %, Temperature 212 °F	EN min.; EN 10002-5
Outokumpu 253MA® High Temperature Austenitic Stainless Steel Variant of 1.4828 with increased nitrogen content and has been microalloyed with rare earth metals (REM). The most suitable temperature range is 850-1100°C, because structural changes when used be..
Tensile Strength, Yield	265 MPa @Strain 0.200 %, Temperature 100 °C	38400 psi @Strain 0.200 %, Temperature 212 °F	EN min.; EN 10002-5
Outokumpu 4318 Cr-Ni Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled strip/sheet (CPP) and cold rolled strip sheet forms.
Tensile Strength, Yield	265 MPa @Strain 0.200 %, Temperature 250 °C	38400 psi @Strain 0.200 %, Temperature 482 °F	EN min.; EN 10002-5
Outokumpu SAF 2304® Duplex Stainless Steel Applications: Pulp and paper industryDesalination plantsFlue-gas cleaningCargo tanks and pipe systems in chemical tankersSeawater systemsFirewalls and blast walls on offshore platformsBridgesCompone..
Tensile Strength, Yield	265 MPa @Strain 0.200 %	38400 psi @Strain 0.200 %	Typical
Industeel CLC 18.10 L General Purpose 18Cr-10Ni Austenitic Stainless Steel Description: CLC 18-10L is a 18Cr-10Ni austenitic stainless steel. The grade contains small amount of ferrite (~ 3%) after solution annealing (1000-1100Â°C â€“ 1832-2012Â°F) and water quenchi..
Tensile Strength, Yield	265 MPa @Strain 1.00 %	38400 psi @Strain 1.00 %	Typical after Solution Annealing
Industeel SIRIUS 310 25% Cr - 0.6% Si Heat Resistant Stainless Steel Description: CLI SIRIUS 310 grade is a fully austenitic stainless steel containing 25% Cr, 0.6% Si and 20% Ni additions. The alloy is well known for its multi-purpose high temperature corrosion resi..
Tensile Strength, Yield	265 MPa @Strain 1.00 %	38400 psi @Strain 1.00 %	Typical after Solution Annealing
Industeel SIRIUS S12 20% Cr - 1.8% Si Heat Resistant Steel Description: CLI SIRIUS S12 grade is an austenitic stainless steel containing 20% Cr, 1.8 % Si and 12% Ni. The low nickel content combined with high chromium and high silicon contents provide good r..
Tensile Strength, Yield	265 MPa @Strain 0.200 %, Thickness 25.0 - 60.0 mm	38400 psi @Strain 0.200 %, Thickness 0.984 - 2.36 in	Typical Strength; Standard EN 485-2
Constellium ALPLAN® 2017A High-Strength Rolled Precision Aluminum Plate, Milled Both Sides ALPLAN® 2017A precision plates combine a very good dimensional stability with a high level of mechanical strength and elongation. The outstanding flatness, the low roughness and high quality of the..
Tensile Strength, Yield	265 MPa @Strain 0.200 %, Thickness 60.0 - 155 mm	38400 psi @Strain 0.200 %, Thickness 2.36 - 6.10 in	Typical Strength; Standard EN 485-2
Constellium ALPLAN® 2017A High-Strength Rolled Precision Aluminum Plate, Milled Both Sides ALPLAN® 2017A precision plates combine a very good dimensional stability with a high level of mechanical strength and elongation. The outstanding flatness, the low roughness and high quality of the..
Tensile Strength, Yield	265 MPa @Temperature -20.0 °C	38400 psi @Temperature -4.00 °F
Akro-Plastic Akroloy® PA GF 50 (2706) PA 6.6 & PA6I/6T Dry, 50% Glass Filled One of the most characteristic properties of polyamide (PA 6.6) is the absorption of moisture. This essentially leads to increased toughness and elongation at break, to name the most important param..
Tensile Strength, Yield	265 MPa @Strain 0.200 %	38400 psi @Strain 0.200 %	Typical
Industeel CLC 18.9 L General Purpose 18Cr-9Ni Austenitic Stainless Steel Description: CLC 18-9L is a 18Cr-9Ni austenitic stainless steel. The grade contains small amount of ferrite (~ 3%) after solution annealing (1000-1100°C – 1832-2012°F) and water quenching. This k..