Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Polymer Resources NY66-IM2-G13 Nylon 66, 13% Glass Reinforced, Impact Modified Nylon 66, 13% Glass Reinforced, Impact Modified, LubricatedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylo.. |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Polymer Resources PPX/NY G10 PPO/Nylon 66 Alloy , 10% Glass Reinforced Polyphenylene Oxide/Nylon 66 Alloy , 10% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Informa.. |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Polymer Resources TP-FRHG15 Polybutylene Terephthalate, 15% Glass Reinforced Alloy, Flame Retardant Polybutylene Terephthalate, 15% Glass Reinforced Alloy, Flame RetardantProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test s.. |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Polymer Resources ABS-G20 ABS, 20% Glass Reinforced Acrylonitrile Butadiene Styrene, 20% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information.. |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Techmer ES Plaslube® J-1/AF/10/TF/10/HS BL8816 PA66 |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Techmer ES Plaslube® NY-1/MS/5 NAT PA66 |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
PlastxWorld CEVIAN® S1220 PC/ABS alloy Glass fiber reinforced PC/ABS alloy.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Plastics Group Polifil® GFRMPPCC-40 40% Glass Reinforced Polypropylene, High Impact Polifil® GFRMPPCC series compounds are high impact polypropylenes reinforced with chemically coupled glass fibers. This combination provides higher impact strength while retaining high stiffness.Ap.. |
|||
Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
Polymer Resources PPX/NY G10 Modified PPO, 10% Glass Reinforced PPX/Nylon 6,6 Alloy
(Unverified Data**)&l Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |