Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Oxford Polymers 20GF 20% Glass Fiber Filled Polyetherimide for Extrusion and Injection Molding 20% Glass Fiber Filled Polyetherimide for Extrusion and Injection MoldingInformation provided by Oxford Polymers. |
|||
Flexural Strength | 207 MPa | 30000 psi | |
Pyrotek TS-102 Thermoset Electrical Insulation Product (Nema Grade: X) Paper reinforcement, Phenolic Resin, Natural Color. High mechanical strength. Electrical properties are secondary.ApplicationsSuperstructure support pads Bus bar insulators Pot cradle insulators E.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
LNP Thermocomp® LF-1006 MG Polyetheretherketone, Glass milled Glass Fiber
(discontinued **) Features: Low WarpageForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still a.. |
|||
Flexural Strength | 207 MPa | 30000 psi | 2mm/min; ASTM D790 |
Kingfa PA6-MG45 45% Glass & Mineral Filled PA6 Features:Low tendency to wrapExcellent size stabilityLow abrasionOutstanding surfaceApplications:Injection moldingAutomobile partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd. |
|||
Flexural Strength | 207 MPa | 30000 psi | |
MTI ThermoStran® PP-30C Long Carbon Fiber Compound ThermoStran® is custom designed long fiber thermoplastic compound (LFC) engineered to meet specific end use requirements. Continuous fibers are pultruded to yield pellets with fibers equivalent t.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Solvay Specialty Polymers Ryton® R-4-02 Polyphenylene Sulfide (PPS), 40% Glass Fiber Ryton® R-4 and R-4-02 40% glass fiber reinforced polyphenylene sulfide compounds provide a good combination of mechanical and electrical properties with outstanding chemical resistance, even at e.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Solvay Specialty Polymers Ryton® R-7-121NA Polyphenylene Sulfide (PPS), GlassMineral Filled Ryton® R-7-121NA and R-7-121BL glass fiber and mineral filled polyphenylene sulfide compounds provide good mechanical strength with good flow and low maintenance molding using conventional moldin.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Techmer ES HiFill® PA6 CF20 RM BK 20% Carbon Fiber Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Carbon Fiber Reinforcement, 20% Filler by WeightAppearance: BlackFeatures: Low Moisture AbsorptionTPCI# 9720102Information provided by.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Techmer ES HiFill® PA6 GF40 A1 BK 40% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 40% Filler by WeightAdditive: Lubricant Features: Lubricated, Low Shrinkage and Good Wear ResistanceAppearan.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ISO 178 |
SABIC Innovative Plastics LNP STAT-KON RE004MPC PA 66 LNP* STAT-KON* RE004MPC is a compound based on Nylon 66 resin containing 20% Milled Carbon Fiber. Added features of this material are: Exceptional Processing, Clean Compound System, Electrically C.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Techmer ES Plaslube® J-1/CF/10/TF/20 BK PA66 |
|||
Flexural Strength | 207 MPa | 30000 psi | ISO 178 |
SABIC Innovative Plastics LNP THERMOCOMP JF008E PES LNP* THERMOCOMP* JF008E is a compound based on Polyethersulfone containing 40% Glass Fiber. Characteristics of this grade are: Easy Molding. |
|||
Flexural Strength | 207 MPa @Temperature 22.8 °C |
30000 psi @Temperature 73.0 °F |
ASTM D790 |
Ensinger TECAPEI® 20% Glass Reinforced, made from Ultem® 2200 PEI TECAPEI™ is an amorphous thermoplastic polyetherimide (PEI) made from Sabic Innovative Plastics' Ultem® 1000 and 2000 series resins. The unreinforced 1000 series materials are translucent amber in.. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Adell BT-17 Nylon 6, 35% Glass Reinforced; Impact Modified Data provided by Adell Plastics, Inc. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
A. Schulman ComAlloy Hiloy® 757 Carbon Fiber Reinforced, Flow Enhanced, PPS Alloy Data provided by the manufacturer, ComAlloy International Company.30% Carbon Fiber Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Flexural Strength | 207 MPa | 30000 psi | ASTM D790 |
Techmer ES HiFill FR® PA6/6 GF25 FR NAT005 25% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber, 25% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Flame Retardant, Heat Stabilized, High Flow and Lubri.. |