Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183-A |
NYCOA 2001 PA 6 high melt strength general extrusion and molding grade of nylon 6Information provided by NYCOA, Inc. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics GELOY FXW749SK ASA Sparkle VisualFx ASA Resin - Weatherable |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics GELOY XP7550 ASA+PC (Asia Pacific) Injection molding ASA-PC Blend suitable for exterior applications featuring outdoor weatherability, toughness, good heat performance and excellent flow. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | |
Parylene Coating Services N Poly (P-Xylylene) Monomer is para-xylylene. Parylene N has a lower coefficient of friction and therefore is recommended where lubricity is needed. Parylene N exhibits a slight haze at thicknesses over 5 microns.Par.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Geloy XTWE280 ASA (Asia Pacific) Weatherble ASA profile extrusion gradeThis data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Density | 1.11 - 1.65 g/cc | 0.0401 - 0.0596 lb/in³ | Average value: 1.21 g/cc Grade Count:22 |
Overview of materials for Nylon 12, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, 20% Glass Fiber Filled". Specific grades with glass content between 15% and 24% are included. .. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
Techmer ES Plastiblend® PA6/6,6 IM 5050 BK MB Nylon 6/66 Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Copolymer, Impact Modified and LubricatedAppearance: BlackProcessing Metho.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
Techmer ES Plastiblend® PA6/6,6 IM 6040 BK MB Nylon 6/66 Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Copolymer, Impact Modified and LubricatedAppearance: BlackProcessing Metho.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
Techmer ES Statiblend® HIPS C BK Availability: North AmericaForms: PelletsFeatures: ConductiveAppearance: BlackTPCI# 7576148Information provided by TP Composites, Inc. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Noryl LS175 PPE+HIPS (Europe-Africa-Middle East) Noryl* LS175 modified polyphenylene ether resin is an unfilled grade suitable for both extrusion and injection molding conversion routes. It uses non-chlorinated, non-brominated FR additives to del.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL NH4030B PPE+HIPS (Europe-Africa-Middle East) NH4030B is a modified PPE-HIPS blend that presents an excellent balance of non halogenated flame retardance, lower smoke production upon burning and low specific gravity for light weight parts. Nory.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-KON 9X04323 PPE+PA66 (Asia Pacific) LNP* Stat-kon* 9X04323 is a compound based on Noryl GTX resin,Added features of this material include: Electrically Conductive. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Noryl PX0003 PPE+HIPS PX0003 resin is a modified PPE+PS blend with an excellent balance of non-chlorinated non-brominated flame retardance, hydrolytic stability, impact and heat resistance, good flow, and low specific gr.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
PlastxWorld CEVIAN® E80 ABS Inherently Static Dissipative Transparent ABSThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
PlastxWorld CEVIAN® VGR10 10% GF ABS Glass fiber reinforced ABS.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183-1 |
Covestro Bayblend® T65 HI PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Improve low temperature .. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
CP-Polymer-Technik Wellamid® 6000/50 HWUVCP Nylon 6, Impact Modified Until 0°C, UV Stabilized, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | |
DuPont Performance Polymers Crastin® FGS600F40 NC010 Polybutylene Terephthalate (PBT)
(Unverified Data**) Unreinforced Low Viscosity Polybutylene Terephthalate Developed for Food Contact Applications Crastin FGS600F40 NC010 is an unreinforced low viscosity polybutylene terephthalate resin for injection .. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | |
DuPont Performance Polymers Crastin® S600F20 NC010 Polybutylene Terephthalate (PBT)
(Unverified Data**)&l Unreinforced Medium Viscosity Polybutylene Terephthalate Crastin S600F20 NC010 is an unreinforced lubricated medium viscosity polybutylene terephthalate resin for injection molding.Information provi.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
Eurotec® Tecolen® HP10 GR30 NL HS PPCP, 30% glass fiber reinforced, heat stabilized, natural Information provided by Eurotec® |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
Arlon 99790N010 0.010" (0.254 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier Design/Construction: Liner: FEP Side 1: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassThis data represents typical values for the production material. The data should not be used to write,.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
Alliance Polymers Zythane™ 6080A Thermoplastic Polyurethane Elastomer Zythane™ 6080A is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good .. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® 526LD Nylon 66 Modified for toughness at low temperatures, injection molding grade.Data provided by the manufacturer |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183/A |
Solvay Specialty Polymers Amodel® AT-1001L Polyphthalamide (PPA)
(Unverified Data**) Amodel AT-1001L is an unreinforced, impact modified polyphthalamide (PPA) resin that exhibits exceptional impact strength at temperatures ranging from room temperature to as low as -40°F (-40°C), .. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL RN0712 PPE+HIPS (Asia Pacific) Noryl RN0712 is an unfilled Post Consumer recycle (PCR) based injection moldable modified polyphenylene ether resin comprising at least 37% PCR styrenic series resin content. Designed for good dimen.. |
|||
Density | 1.11 g/cc | 0.0401 lb/in³ | Latex |
DuPont Performance Polymers Neoprene 654 Polychloroprene
(discontinued **) Main feature: DPHS. Principal uses include: Dipped goods, Coatings, Adhesives (Lamination, Heat reactivated).Solids content: 59%. Initial pH: 12. Surface tension: 40 dyne/cm. Polymer type: Low g.. |