- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Unitika M1030E PA6, Conditioned
Unitika M1030E PA6, Conditioned
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 |
| Manufacturer | Unitika |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Unitika M1030E PA6, Conditioned.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Nano composite nylonInformation provided by Unitika Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | ASTM D792 |
| Water Absorption | 0.70 % @Time 86400 sec |
0.70 % @Time 24.0 hour |
|
| Moisture Absorption at Equilibrium | 2.8 % | 2.8 % | 50% RH |
| Linear Mold Shrinkage, Flow | 0.0080 cm/cm @Thickness 3.20 mm |
0.0080 in/in @Thickness 0.126 in |
ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.010 cm/cm @Thickness 3.20 mm |
0.010 in/in @Thickness 0.126 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 65.0 MPa | 9430 psi | ASTM D638 |
| Elongation at Break | 4.0 % | 4.0 % | ASTM D638 |
| Flexural Strength | 78.0 MPa | 11300 psi | ASTM D790 |
| Flexural Modulus | 2.50 GPa | 363 ksi | ASTM D790 |
| Izod Impact, Notched | 0.700 J/cm | 1.31 ft-lb/in | ASTM D256 |
Users viewing this material also viewed the following:
- Mallard Creek Polymers Rovene® 6021 Styrene-Acrylic Emulsion
- Teknor Apex APEX® 90-A41R-60-NT Polyvinyl Chloride, Flexible
- SABIC Innovative Plastics NORYL PX1543 PPE+PS (Asia Pacific)
- Teknor Apex Telcar® TL-2572A Thermoplastic Elastomer
- Dow Corning XIAMETER® PMCPPMX-200 350CS Silicone Fluid
- Azoty Tarnow™ TARNOFORM 300 GF6 BK POM
- 3M QI-5/16-220 Cold Shrink Quick Insulator
- Honeywell Stretch-Vac® Elastomax 1000 Heat-Stabilized Blown Film (discontinued **)
- Johnson Matthey JM1090 Soft Solder/Flux
Copyright © lookpolymers.com All Rights Reserved