- HOME
- POLYMER SEARCH
- Adhesive
- Tra-Con Tra-Bond 927-1 Polysulfide Adhesive
Tra-Con Tra-Bond 927-1 Polysulfide Adhesive
| Category | Polymer , Adhesive , Thermoset |
| Manufacturer | Tra-Con, Inc. |
| Trade Name | Tra-Bond |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Tra-Con Tra-Bond 927-1 Polysulfide Adhesive.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
TRA-BOND 927-1 thermally conductive polysulfide adhesive is designed for heat sink bonding applications. Information provided by Tra-Con Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity | 40000 cP @Temperature 25.0 °C |
40000 cP @Temperature 77.0 °F |
After mixing |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 55 | 55 | |
| Adhesive Bond Strength | 1.55 MPa | 225 psi | Lap shear, alum to alum, @ 25°C |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 7.20e+10 ohm-cm | 7.20e+10 ohm-cm | |
| Dielectric Strength | 0.354 kV/mm | 9.00 kV/in | |
| Dissipation Factor | 0.23 | 0.23 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 240 min @Temperature 75.0 °C |
4.00 hour @Temperature 167 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Working Life hours | 2 | At 25°C |
Users viewing this material also viewed the following:
- Polykemi AB SCANMID 6 B11^ FX25 FR10 Nylon 6, Glass Fiber Reinforced, Flame Retardant
- Ineos ABS Lustran® Ultra 2337 General Purpose, Superhigh-Gloss (discontinued **)
- NOVA Chemicals Sclair® 8405 BK, 8405GBK MDPE Rotational Molding Resin (discontinued **)
- Flint Hills P4G3A-052 Homopolymer Polypropylene
- Solvay TECHNYLSTARâ„¢ AFX 218S V50 PA6, 50% glass filled, DRY
- Techmer ES Plastiblend® PC/ABS FR GF30 30% Glass Filled
- Tra-Con Tra-Bond 9059D Rigid Unfilled Epoxy Adhesive
- Denka LCS Z1050 Thermoplastic Elastomer, Extrusion grade (general)
- Denka LCS Z1060 Thermoplastic Elastomer, Extrusion grade (general)
- Arlon Thermabond® 48A43X008 0.008"(0.203 mm) Cured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved